(0) Obligation:

Q restricted rewrite system:
The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.

(1) DependencyPairsProof (EQUIVALENT transformation)

Using Dependency Pairs [AG00,LPAR04] we result in the following initial DP problem.

(2) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(minus(0, Y)) → MARK(0)
ACTIVE(minus(s(X), s(Y))) → MARK(minus(X, Y))
ACTIVE(minus(s(X), s(Y))) → MINUS(X, Y)
ACTIVE(geq(X, 0)) → MARK(true)
ACTIVE(geq(0, s(Y))) → MARK(false)
ACTIVE(geq(s(X), s(Y))) → MARK(geq(X, Y))
ACTIVE(geq(s(X), s(Y))) → GEQ(X, Y)
ACTIVE(div(0, s(Y))) → MARK(0)
ACTIVE(div(s(X), s(Y))) → MARK(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
ACTIVE(div(s(X), s(Y))) → IF(geq(X, Y), s(div(minus(X, Y), s(Y))), 0)
ACTIVE(div(s(X), s(Y))) → GEQ(X, Y)
ACTIVE(div(s(X), s(Y))) → S(div(minus(X, Y), s(Y)))
ACTIVE(div(s(X), s(Y))) → DIV(minus(X, Y), s(Y))
ACTIVE(div(s(X), s(Y))) → MINUS(X, Y)
ACTIVE(if(true, X, Y)) → MARK(X)
ACTIVE(if(false, X, Y)) → MARK(Y)
MARK(minus(X1, X2)) → ACTIVE(minus(X1, X2))
MARK(0) → ACTIVE(0)
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(s(X)) → S(mark(X))
MARK(s(X)) → MARK(X)
MARK(geq(X1, X2)) → ACTIVE(geq(X1, X2))
MARK(true) → ACTIVE(true)
MARK(false) → ACTIVE(false)
MARK(div(X1, X2)) → ACTIVE(div(mark(X1), X2))
MARK(div(X1, X2)) → DIV(mark(X1), X2)
MARK(div(X1, X2)) → MARK(X1)
MARK(if(X1, X2, X3)) → ACTIVE(if(mark(X1), X2, X3))
MARK(if(X1, X2, X3)) → IF(mark(X1), X2, X3)
MARK(if(X1, X2, X3)) → MARK(X1)
MINUS(mark(X1), X2) → MINUS(X1, X2)
MINUS(X1, mark(X2)) → MINUS(X1, X2)
MINUS(active(X1), X2) → MINUS(X1, X2)
MINUS(X1, active(X2)) → MINUS(X1, X2)
S(mark(X)) → S(X)
S(active(X)) → S(X)
GEQ(mark(X1), X2) → GEQ(X1, X2)
GEQ(X1, mark(X2)) → GEQ(X1, X2)
GEQ(active(X1), X2) → GEQ(X1, X2)
GEQ(X1, active(X2)) → GEQ(X1, X2)
DIV(mark(X1), X2) → DIV(X1, X2)
DIV(X1, mark(X2)) → DIV(X1, X2)
DIV(active(X1), X2) → DIV(X1, X2)
DIV(X1, active(X2)) → DIV(X1, X2)
IF(mark(X1), X2, X3) → IF(X1, X2, X3)
IF(X1, mark(X2), X3) → IF(X1, X2, X3)
IF(X1, X2, mark(X3)) → IF(X1, X2, X3)
IF(active(X1), X2, X3) → IF(X1, X2, X3)
IF(X1, active(X2), X3) → IF(X1, X2, X3)
IF(X1, X2, active(X3)) → IF(X1, X2, X3)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(3) DependencyGraphProof (EQUIVALENT transformation)

The approximation of the Dependency Graph [LPAR04,FROCOS05,EDGSTAR] contains 6 SCCs with 17 less nodes.

(4) Complex Obligation (AND)

(5) Obligation:

Q DP problem:
The TRS P consists of the following rules:

IF(X1, mark(X2), X3) → IF(X1, X2, X3)
IF(mark(X1), X2, X3) → IF(X1, X2, X3)
IF(X1, X2, mark(X3)) → IF(X1, X2, X3)
IF(active(X1), X2, X3) → IF(X1, X2, X3)
IF(X1, active(X2), X3) → IF(X1, X2, X3)
IF(X1, X2, active(X3)) → IF(X1, X2, X3)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(6) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


IF(X1, mark(X2), X3) → IF(X1, X2, X3)
IF(X1, X2, mark(X3)) → IF(X1, X2, X3)
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
IF(x0, x1, x2, x3)  =  IF(x0)

Tags:
IF has argument tags [0,3,0,0] and root tag 0

Comparison: MAX
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
IF(x1, x2, x3)  =  IF(x2, x3)
mark(x1)  =  mark(x1)
active(x1)  =  x1

Lexicographic path order with status [LPO].
Quasi-Precedence:
trivial

Status:
IF2: [2,1]
mark1: [1]


The following usable rules [FROCOS05] were oriented: none

(7) Obligation:

Q DP problem:
The TRS P consists of the following rules:

IF(mark(X1), X2, X3) → IF(X1, X2, X3)
IF(active(X1), X2, X3) → IF(X1, X2, X3)
IF(X1, active(X2), X3) → IF(X1, X2, X3)
IF(X1, X2, active(X3)) → IF(X1, X2, X3)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(8) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


IF(X1, active(X2), X3) → IF(X1, X2, X3)
IF(X1, X2, active(X3)) → IF(X1, X2, X3)
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
IF(x0, x1, x2, x3)  =  IF(x2, x3)

Tags:
IF has argument tags [1,2,0,2] and root tag 0

Comparison: MS
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
IF(x1, x2, x3)  =  x3
mark(x1)  =  mark
active(x1)  =  active(x1)

Lexicographic path order with status [LPO].
Quasi-Precedence:
trivial

Status:
mark: []
active1: [1]


The following usable rules [FROCOS05] were oriented: none

(9) Obligation:

Q DP problem:
The TRS P consists of the following rules:

IF(mark(X1), X2, X3) → IF(X1, X2, X3)
IF(active(X1), X2, X3) → IF(X1, X2, X3)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(10) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


IF(mark(X1), X2, X3) → IF(X1, X2, X3)
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
IF(x0, x1, x2, x3)  =  IF(x0)

Tags:
IF has argument tags [0,1,0,3] and root tag 0

Comparison: MAX
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
IF(x1, x2, x3)  =  IF(x1, x2, x3)
mark(x1)  =  mark(x1)
active(x1)  =  x1

Lexicographic path order with status [LPO].
Quasi-Precedence:
trivial

Status:
IF3: [3,2,1]
mark1: [1]


The following usable rules [FROCOS05] were oriented: none

(11) Obligation:

Q DP problem:
The TRS P consists of the following rules:

IF(active(X1), X2, X3) → IF(X1, X2, X3)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(12) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


IF(active(X1), X2, X3) → IF(X1, X2, X3)
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
IF(x0, x1, x2, x3)  =  IF(x1, x3)

Tags:
IF has argument tags [1,1,3,3] and root tag 0

Comparison: MS
Underlying order for the size change arcs and the rules of R:
Lexicographic path order with status [LPO].
Quasi-Precedence:
trivial

Status:
IF3: [2,3,1]
active1: [1]


The following usable rules [FROCOS05] were oriented: none

(13) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(14) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(15) TRUE

(16) Obligation:

Q DP problem:
The TRS P consists of the following rules:

DIV(X1, mark(X2)) → DIV(X1, X2)
DIV(mark(X1), X2) → DIV(X1, X2)
DIV(active(X1), X2) → DIV(X1, X2)
DIV(X1, active(X2)) → DIV(X1, X2)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(17) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


DIV(X1, mark(X2)) → DIV(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
DIV(x0, x1, x2)  =  DIV(x0)

Tags:
DIV has argument tags [0,2,2] and root tag 0

Comparison: MAX
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
DIV(x1, x2)  =  x2
mark(x1)  =  mark(x1)
active(x1)  =  x1

Lexicographic path order with status [LPO].
Quasi-Precedence:
trivial

Status:
mark1: [1]


The following usable rules [FROCOS05] were oriented: none

(18) Obligation:

Q DP problem:
The TRS P consists of the following rules:

DIV(mark(X1), X2) → DIV(X1, X2)
DIV(active(X1), X2) → DIV(X1, X2)
DIV(X1, active(X2)) → DIV(X1, X2)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(19) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


DIV(mark(X1), X2) → DIV(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
DIV(x0, x1, x2)  =  DIV(x0)

Tags:
DIV has argument tags [0,2,3] and root tag 0

Comparison: MAX
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
DIV(x1, x2)  =  DIV(x1, x2)
mark(x1)  =  mark(x1)
active(x1)  =  x1

Lexicographic path order with status [LPO].
Quasi-Precedence:
mark1 > DIV2

Status:
DIV2: [2,1]
mark1: [1]


The following usable rules [FROCOS05] were oriented: none

(20) Obligation:

Q DP problem:
The TRS P consists of the following rules:

DIV(active(X1), X2) → DIV(X1, X2)
DIV(X1, active(X2)) → DIV(X1, X2)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(21) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


DIV(active(X1), X2) → DIV(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
DIV(x0, x1, x2)  =  DIV(x0)

Tags:
DIV has argument tags [2,0,0] and root tag 0

Comparison: MAX
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
DIV(x1, x2)  =  x1
active(x1)  =  active(x1)

Lexicographic path order with status [LPO].
Quasi-Precedence:
trivial

Status:
active1: [1]


The following usable rules [FROCOS05] were oriented: none

(22) Obligation:

Q DP problem:
The TRS P consists of the following rules:

DIV(X1, active(X2)) → DIV(X1, X2)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(23) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


DIV(X1, active(X2)) → DIV(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
DIV(x0, x1, x2)  =  DIV(x0, x2)

Tags:
DIV has argument tags [2,3,3] and root tag 0

Comparison: DMS
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
DIV(x1, x2)  =  DIV(x1)
active(x1)  =  active(x1)

Lexicographic path order with status [LPO].
Quasi-Precedence:
[DIV1, active1]

Status:
DIV1: [1]
active1: [1]


The following usable rules [FROCOS05] were oriented: none

(24) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(25) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(26) TRUE

(27) Obligation:

Q DP problem:
The TRS P consists of the following rules:

GEQ(X1, mark(X2)) → GEQ(X1, X2)
GEQ(mark(X1), X2) → GEQ(X1, X2)
GEQ(active(X1), X2) → GEQ(X1, X2)
GEQ(X1, active(X2)) → GEQ(X1, X2)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(28) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


GEQ(X1, mark(X2)) → GEQ(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
GEQ(x0, x1, x2)  =  GEQ(x0)

Tags:
GEQ has argument tags [0,2,2] and root tag 0

Comparison: MAX
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
GEQ(x1, x2)  =  x2
mark(x1)  =  mark(x1)
active(x1)  =  x1

Lexicographic path order with status [LPO].
Quasi-Precedence:
trivial

Status:
mark1: [1]


The following usable rules [FROCOS05] were oriented: none

(29) Obligation:

Q DP problem:
The TRS P consists of the following rules:

GEQ(mark(X1), X2) → GEQ(X1, X2)
GEQ(active(X1), X2) → GEQ(X1, X2)
GEQ(X1, active(X2)) → GEQ(X1, X2)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(30) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


GEQ(mark(X1), X2) → GEQ(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
GEQ(x0, x1, x2)  =  GEQ(x0)

Tags:
GEQ has argument tags [0,2,3] and root tag 0

Comparison: MAX
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
GEQ(x1, x2)  =  GEQ(x1, x2)
mark(x1)  =  mark(x1)
active(x1)  =  x1

Lexicographic path order with status [LPO].
Quasi-Precedence:
mark1 > GEQ2

Status:
GEQ2: [2,1]
mark1: [1]


The following usable rules [FROCOS05] were oriented: none

(31) Obligation:

Q DP problem:
The TRS P consists of the following rules:

GEQ(active(X1), X2) → GEQ(X1, X2)
GEQ(X1, active(X2)) → GEQ(X1, X2)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(32) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


GEQ(active(X1), X2) → GEQ(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
GEQ(x0, x1, x2)  =  GEQ(x0)

Tags:
GEQ has argument tags [2,0,0] and root tag 0

Comparison: MAX
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
GEQ(x1, x2)  =  x1
active(x1)  =  active(x1)

Lexicographic path order with status [LPO].
Quasi-Precedence:
trivial

Status:
active1: [1]


The following usable rules [FROCOS05] were oriented: none

(33) Obligation:

Q DP problem:
The TRS P consists of the following rules:

GEQ(X1, active(X2)) → GEQ(X1, X2)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(34) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


GEQ(X1, active(X2)) → GEQ(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
GEQ(x0, x1, x2)  =  GEQ(x0, x2)

Tags:
GEQ has argument tags [2,3,3] and root tag 0

Comparison: DMS
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
GEQ(x1, x2)  =  GEQ(x1)
active(x1)  =  active(x1)

Lexicographic path order with status [LPO].
Quasi-Precedence:
[GEQ1, active1]

Status:
GEQ1: [1]
active1: [1]


The following usable rules [FROCOS05] were oriented: none

(35) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(36) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(37) TRUE

(38) Obligation:

Q DP problem:
The TRS P consists of the following rules:

S(active(X)) → S(X)
S(mark(X)) → S(X)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(39) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


S(active(X)) → S(X)
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
S(x0, x1)  =  S(x0, x1)

Tags:
S has argument tags [1,0] and root tag 0

Comparison: MS
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
S(x1)  =  S
active(x1)  =  active(x1)
mark(x1)  =  x1

Lexicographic path order with status [LPO].
Quasi-Precedence:
trivial

Status:
S: []
active1: [1]


The following usable rules [FROCOS05] were oriented: none

(40) Obligation:

Q DP problem:
The TRS P consists of the following rules:

S(mark(X)) → S(X)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(41) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


S(mark(X)) → S(X)
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
S(x0, x1)  =  S(x0)

Tags:
S has argument tags [0,1] and root tag 0

Comparison: MAX
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
S(x1)  =  x1
mark(x1)  =  mark(x1)

Lexicographic path order with status [LPO].
Quasi-Precedence:
trivial

Status:
mark1: [1]


The following usable rules [FROCOS05] were oriented: none

(42) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(43) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(44) TRUE

(45) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MINUS(X1, mark(X2)) → MINUS(X1, X2)
MINUS(mark(X1), X2) → MINUS(X1, X2)
MINUS(active(X1), X2) → MINUS(X1, X2)
MINUS(X1, active(X2)) → MINUS(X1, X2)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(46) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MINUS(X1, mark(X2)) → MINUS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
MINUS(x0, x1, x2)  =  MINUS(x0)

Tags:
MINUS has argument tags [0,2,2] and root tag 0

Comparison: MAX
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
MINUS(x1, x2)  =  x2
mark(x1)  =  mark(x1)
active(x1)  =  x1

Lexicographic path order with status [LPO].
Quasi-Precedence:
trivial

Status:
mark1: [1]


The following usable rules [FROCOS05] were oriented: none

(47) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MINUS(mark(X1), X2) → MINUS(X1, X2)
MINUS(active(X1), X2) → MINUS(X1, X2)
MINUS(X1, active(X2)) → MINUS(X1, X2)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(48) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MINUS(mark(X1), X2) → MINUS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
MINUS(x0, x1, x2)  =  MINUS(x0)

Tags:
MINUS has argument tags [0,2,3] and root tag 0

Comparison: MAX
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
MINUS(x1, x2)  =  MINUS(x1, x2)
mark(x1)  =  mark(x1)
active(x1)  =  x1

Lexicographic path order with status [LPO].
Quasi-Precedence:
mark1 > MINUS2

Status:
MINUS2: [2,1]
mark1: [1]


The following usable rules [FROCOS05] were oriented: none

(49) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MINUS(active(X1), X2) → MINUS(X1, X2)
MINUS(X1, active(X2)) → MINUS(X1, X2)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(50) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MINUS(active(X1), X2) → MINUS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
MINUS(x0, x1, x2)  =  MINUS(x0)

Tags:
MINUS has argument tags [2,0,0] and root tag 0

Comparison: MAX
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
MINUS(x1, x2)  =  x1
active(x1)  =  active(x1)

Lexicographic path order with status [LPO].
Quasi-Precedence:
trivial

Status:
active1: [1]


The following usable rules [FROCOS05] were oriented: none

(51) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MINUS(X1, active(X2)) → MINUS(X1, X2)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(52) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MINUS(X1, active(X2)) → MINUS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
MINUS(x0, x1, x2)  =  MINUS(x0, x2)

Tags:
MINUS has argument tags [2,3,3] and root tag 0

Comparison: DMS
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
MINUS(x1, x2)  =  MINUS(x1)
active(x1)  =  active(x1)

Lexicographic path order with status [LPO].
Quasi-Precedence:
[MINUS1, active1]

Status:
MINUS1: [1]
active1: [1]


The following usable rules [FROCOS05] were oriented: none

(53) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(54) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(55) TRUE

(56) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(minus(s(X), s(Y))) → MARK(minus(X, Y))
MARK(minus(X1, X2)) → ACTIVE(minus(X1, X2))
ACTIVE(geq(s(X), s(Y))) → MARK(geq(X, Y))
MARK(s(X)) → ACTIVE(s(mark(X)))
ACTIVE(div(s(X), s(Y))) → MARK(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
MARK(s(X)) → MARK(X)
MARK(geq(X1, X2)) → ACTIVE(geq(X1, X2))
ACTIVE(if(true, X, Y)) → MARK(X)
MARK(div(X1, X2)) → ACTIVE(div(mark(X1), X2))
ACTIVE(if(false, X, Y)) → MARK(Y)
MARK(div(X1, X2)) → MARK(X1)
MARK(if(X1, X2, X3)) → ACTIVE(if(mark(X1), X2, X3))
MARK(if(X1, X2, X3)) → MARK(X1)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(57) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MARK(s(X)) → ACTIVE(s(mark(X)))
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
ACTIVE(x0, x1)  =  ACTIVE(x0, x1)
MARK(x0, x1)  =  MARK(x0)

Tags:
ACTIVE has argument tags [0,3] and root tag 0
MARK has argument tags [0,3] and root tag 0

Comparison: MIN
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
ACTIVE(x1)  =  ACTIVE
minus(x1, x2)  =  minus
s(x1)  =  s
MARK(x1)  =  MARK
geq(x1, x2)  =  geq
mark(x1)  =  x1
div(x1, x2)  =  div(x1, x2)
if(x1, x2, x3)  =  if(x2, x3)
0  =  0
true  =  true
false  =  false
active(x1)  =  x1

Lexicographic path order with status [LPO].
Quasi-Precedence:
[ACTIVE, minus, MARK, geq, div2, if2, true, false] > [s, 0]

Status:
ACTIVE: []
minus: []
s: []
MARK: []
geq: []
div2: [1,2]
if2: [1,2]
0: []
true: []
false: []


The following usable rules [FROCOS05] were oriented: none

(58) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(minus(s(X), s(Y))) → MARK(minus(X, Y))
MARK(minus(X1, X2)) → ACTIVE(minus(X1, X2))
ACTIVE(geq(s(X), s(Y))) → MARK(geq(X, Y))
ACTIVE(div(s(X), s(Y))) → MARK(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
MARK(s(X)) → MARK(X)
MARK(geq(X1, X2)) → ACTIVE(geq(X1, X2))
ACTIVE(if(true, X, Y)) → MARK(X)
MARK(div(X1, X2)) → ACTIVE(div(mark(X1), X2))
ACTIVE(if(false, X, Y)) → MARK(Y)
MARK(div(X1, X2)) → MARK(X1)
MARK(if(X1, X2, X3)) → ACTIVE(if(mark(X1), X2, X3))
MARK(if(X1, X2, X3)) → MARK(X1)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(59) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ACTIVE(div(s(X), s(Y))) → MARK(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
MARK(s(X)) → MARK(X)
ACTIVE(if(true, X, Y)) → MARK(X)
ACTIVE(if(false, X, Y)) → MARK(Y)
MARK(div(X1, X2)) → MARK(X1)
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
ACTIVE(x0, x1)  =  ACTIVE(x1)
MARK(x0, x1)  =  MARK(x0, x1)

Tags:
ACTIVE has argument tags [3,2] and root tag 1
MARK has argument tags [0,2] and root tag 1

Comparison: MAX
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
ACTIVE(x1)  =  x1
minus(x1, x2)  =  minus
s(x1)  =  s(x1)
MARK(x1)  =  MARK
geq(x1, x2)  =  geq
div(x1, x2)  =  div(x1)
if(x1, x2, x3)  =  if(x1, x2, x3)
0  =  0
true  =  true
mark(x1)  =  x1
false  =  false
active(x1)  =  x1

Lexicographic path order with status [LPO].
Quasi-Precedence:
[geq, div1, true] > s1 > [minus, MARK, 0, false] > if3

Status:
minus: []
s1: [1]
MARK: []
geq: []
div1: [1]
if3: [1,3,2]
0: []
true: []
false: []


The following usable rules [FROCOS05] were oriented:

minus(X1, mark(X2)) → minus(X1, X2)
minus(mark(X1), X2) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(mark(X1), X2) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
div(X1, mark(X2)) → div(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
mark(minus(X1, X2)) → active(minus(X1, X2))
active(geq(s(X), s(Y))) → mark(geq(X, Y))
mark(s(X)) → active(s(mark(X)))
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
mark(geq(X1, X2)) → active(geq(X1, X2))
active(if(true, X, Y)) → mark(X)
mark(div(X1, X2)) → active(div(mark(X1), X2))
active(if(false, X, Y)) → mark(Y)
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
mark(0) → active(0)
mark(true) → active(true)
mark(false) → active(false)
active(minus(0, Y)) → mark(0)
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(div(0, s(Y))) → mark(0)

(60) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(minus(s(X), s(Y))) → MARK(minus(X, Y))
MARK(minus(X1, X2)) → ACTIVE(minus(X1, X2))
ACTIVE(geq(s(X), s(Y))) → MARK(geq(X, Y))
MARK(geq(X1, X2)) → ACTIVE(geq(X1, X2))
MARK(div(X1, X2)) → ACTIVE(div(mark(X1), X2))
MARK(if(X1, X2, X3)) → ACTIVE(if(mark(X1), X2, X3))
MARK(if(X1, X2, X3)) → MARK(X1)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(61) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MARK(div(X1, X2)) → ACTIVE(div(mark(X1), X2))
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
ACTIVE(x0, x1)  =  ACTIVE(x0, x1)
MARK(x0, x1)  =  MARK(x0, x1)

Tags:
ACTIVE has argument tags [3,1] and root tag 0
MARK has argument tags [3,2] and root tag 0

Comparison: MIN
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
ACTIVE(x1)  =  ACTIVE
minus(x1, x2)  =  minus(x1, x2)
s(x1)  =  x1
MARK(x1)  =  MARK
geq(x1, x2)  =  geq(x1, x2)
div(x1, x2)  =  div
mark(x1)  =  mark(x1)
if(x1, x2, x3)  =  if
active(x1)  =  x1
0  =  0
true  =  true
false  =  false

Lexicographic path order with status [LPO].
Quasi-Precedence:
[mark1, true] > minus2 > [ACTIVE, MARK, geq2] > false > div
[mark1, true] > if > [ACTIVE, MARK, geq2] > false > div
[mark1, true] > 0 > false > div

Status:
ACTIVE: []
minus2: [2,1]
MARK: []
geq2: [2,1]
div: []
mark1: [1]
if: []
0: []
true: []
false: []


The following usable rules [FROCOS05] were oriented: none

(62) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(minus(s(X), s(Y))) → MARK(minus(X, Y))
MARK(minus(X1, X2)) → ACTIVE(minus(X1, X2))
ACTIVE(geq(s(X), s(Y))) → MARK(geq(X, Y))
MARK(geq(X1, X2)) → ACTIVE(geq(X1, X2))
MARK(if(X1, X2, X3)) → ACTIVE(if(mark(X1), X2, X3))
MARK(if(X1, X2, X3)) → MARK(X1)

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(63) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ACTIVE(geq(s(X), s(Y))) → MARK(geq(X, Y))
MARK(if(X1, X2, X3)) → MARK(X1)
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
ACTIVE(x0, x1)  =  ACTIVE(x0, x1)
MARK(x0, x1)  =  MARK(x1)

Tags:
ACTIVE has argument tags [2,1] and root tag 0
MARK has argument tags [0,1] and root tag 0

Comparison: MAX
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
ACTIVE(x1)  =  ACTIVE
minus(x1, x2)  =  minus
s(x1)  =  s(x1)
MARK(x1)  =  MARK
geq(x1, x2)  =  geq(x1)
if(x1, x2, x3)  =  if(x1, x2, x3)
mark(x1)  =  x1
active(x1)  =  x1
div(x1, x2)  =  div(x1)
0  =  0
true  =  true
false  =  false

Lexicographic path order with status [LPO].
Quasi-Precedence:
div1 > [minus, s1] > [ACTIVE, MARK, geq1, false] > [0, true]
div1 > if3 > [ACTIVE, MARK, geq1, false] > [0, true]

Status:
ACTIVE: []
minus: []
s1: [1]
MARK: []
geq1: [1]
if3: [1,2,3]
div1: [1]
0: []
true: []
false: []


The following usable rules [FROCOS05] were oriented: none

(64) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(minus(s(X), s(Y))) → MARK(minus(X, Y))
MARK(minus(X1, X2)) → ACTIVE(minus(X1, X2))
MARK(geq(X1, X2)) → ACTIVE(geq(X1, X2))
MARK(if(X1, X2, X3)) → ACTIVE(if(mark(X1), X2, X3))

The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(65) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ACTIVE(minus(s(X), s(Y))) → MARK(minus(X, Y))
MARK(minus(X1, X2)) → ACTIVE(minus(X1, X2))
MARK(geq(X1, X2)) → ACTIVE(geq(X1, X2))
MARK(if(X1, X2, X3)) → ACTIVE(if(mark(X1), X2, X3))
The remaining pairs can at least be oriented weakly.
Used ordering: SCNP Order with the following components:
Level mapping:
Top level AFS:
ACTIVE(x0, x1)  =  ACTIVE(x1)
MARK(x0, x1)  =  MARK(x0, x1)

Tags:
ACTIVE has argument tags [2,2] and root tag 1
MARK has argument tags [0,2] and root tag 0

Comparison: MS
Underlying order for the size change arcs and the rules of R:
Combined order from the following AFS and order.
ACTIVE(x1)  =  ACTIVE(x1)
minus(x1, x2)  =  minus(x2)
s(x1)  =  s(x1)
MARK(x1)  =  x1
geq(x1, x2)  =  geq(x2)
if(x1, x2, x3)  =  if(x2)
mark(x1)  =  x1
active(x1)  =  x1
div(x1, x2)  =  div
0  =  0
true  =  true
false  =  false

Lexicographic path order with status [LPO].
Quasi-Precedence:
minus1 > ACTIVE1 > s1
geq1 > ACTIVE1 > s1
geq1 > true > s1
if1 > ACTIVE1 > s1
div > s1
0 > true > s1
false > s1

Status:
ACTIVE1: [1]
minus1: [1]
s1: [1]
geq1: [1]
if1: [1]
div: []
0: []
true: []
false: []


The following usable rules [FROCOS05] were oriented:

minus(X1, mark(X2)) → minus(X1, X2)
minus(mark(X1), X2) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(mark(X1), X2) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

(66) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(minus(0, Y)) → mark(0)
active(minus(s(X), s(Y))) → mark(minus(X, Y))
active(geq(X, 0)) → mark(true)
active(geq(0, s(Y))) → mark(false)
active(geq(s(X), s(Y))) → mark(geq(X, Y))
active(div(0, s(Y))) → mark(0)
active(div(s(X), s(Y))) → mark(if(geq(X, Y), s(div(minus(X, Y), s(Y))), 0))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
mark(minus(X1, X2)) → active(minus(X1, X2))
mark(0) → active(0)
mark(s(X)) → active(s(mark(X)))
mark(geq(X1, X2)) → active(geq(X1, X2))
mark(true) → active(true)
mark(false) → active(false)
mark(div(X1, X2)) → active(div(mark(X1), X2))
mark(if(X1, X2, X3)) → active(if(mark(X1), X2, X3))
minus(mark(X1), X2) → minus(X1, X2)
minus(X1, mark(X2)) → minus(X1, X2)
minus(active(X1), X2) → minus(X1, X2)
minus(X1, active(X2)) → minus(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
geq(mark(X1), X2) → geq(X1, X2)
geq(X1, mark(X2)) → geq(X1, X2)
geq(active(X1), X2) → geq(X1, X2)
geq(X1, active(X2)) → geq(X1, X2)
div(mark(X1), X2) → div(X1, X2)
div(X1, mark(X2)) → div(X1, X2)
div(active(X1), X2) → div(X1, X2)
div(X1, active(X2)) → div(X1, X2)
if(mark(X1), X2, X3) → if(X1, X2, X3)
if(X1, mark(X2), X3) → if(X1, X2, X3)
if(X1, X2, mark(X3)) → if(X1, X2, X3)
if(active(X1), X2, X3) → if(X1, X2, X3)
if(X1, active(X2), X3) → if(X1, X2, X3)
if(X1, X2, active(X3)) → if(X1, X2, X3)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(67) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(68) TRUE