(0) Obligation:

Q restricted rewrite system:
The TRS R consists of the following rules:

fst(0, Z) → nil
fst(s(X), cons(Y, Z)) → cons(Y, n__fst(activate(X), activate(Z)))
from(X) → cons(X, n__from(n__s(X)))
add(0, X) → X
add(s(X), Y) → s(n__add(activate(X), Y))
len(nil) → 0
len(cons(X, Z)) → s(n__len(activate(Z)))
fst(X1, X2) → n__fst(X1, X2)
from(X) → n__from(X)
s(X) → n__s(X)
add(X1, X2) → n__add(X1, X2)
len(X) → n__len(X)
activate(n__fst(X1, X2)) → fst(activate(X1), activate(X2))
activate(n__from(X)) → from(activate(X))
activate(n__s(X)) → s(X)
activate(n__add(X1, X2)) → add(activate(X1), activate(X2))
activate(n__len(X)) → len(activate(X))
activate(X) → X

Q is empty.

(1) DependencyPairsProof (EQUIVALENT transformation)

Using Dependency Pairs [AG00,LPAR04] we result in the following initial DP problem.

(2) Obligation:

Q DP problem:
The TRS P consists of the following rules:

FST(s(X), cons(Y, Z)) → ACTIVATE(X)
FST(s(X), cons(Y, Z)) → ACTIVATE(Z)
ADD(s(X), Y) → S(n__add(activate(X), Y))
ADD(s(X), Y) → ACTIVATE(X)
LEN(cons(X, Z)) → S(n__len(activate(Z)))
LEN(cons(X, Z)) → ACTIVATE(Z)
ACTIVATE(n__fst(X1, X2)) → FST(activate(X1), activate(X2))
ACTIVATE(n__fst(X1, X2)) → ACTIVATE(X1)
ACTIVATE(n__fst(X1, X2)) → ACTIVATE(X2)
ACTIVATE(n__from(X)) → FROM(activate(X))
ACTIVATE(n__from(X)) → ACTIVATE(X)
ACTIVATE(n__s(X)) → S(X)
ACTIVATE(n__add(X1, X2)) → ADD(activate(X1), activate(X2))
ACTIVATE(n__add(X1, X2)) → ACTIVATE(X1)
ACTIVATE(n__add(X1, X2)) → ACTIVATE(X2)
ACTIVATE(n__len(X)) → LEN(activate(X))
ACTIVATE(n__len(X)) → ACTIVATE(X)

The TRS R consists of the following rules:

fst(0, Z) → nil
fst(s(X), cons(Y, Z)) → cons(Y, n__fst(activate(X), activate(Z)))
from(X) → cons(X, n__from(n__s(X)))
add(0, X) → X
add(s(X), Y) → s(n__add(activate(X), Y))
len(nil) → 0
len(cons(X, Z)) → s(n__len(activate(Z)))
fst(X1, X2) → n__fst(X1, X2)
from(X) → n__from(X)
s(X) → n__s(X)
add(X1, X2) → n__add(X1, X2)
len(X) → n__len(X)
activate(n__fst(X1, X2)) → fst(activate(X1), activate(X2))
activate(n__from(X)) → from(activate(X))
activate(n__s(X)) → s(X)
activate(n__add(X1, X2)) → add(activate(X1), activate(X2))
activate(n__len(X)) → len(activate(X))
activate(X) → X

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(3) DependencyGraphProof (EQUIVALENT transformation)

The approximation of the Dependency Graph [LPAR04,FROCOS05,EDGSTAR] contains 1 SCC with 4 less nodes.

(4) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVATE(n__fst(X1, X2)) → FST(activate(X1), activate(X2))
FST(s(X), cons(Y, Z)) → ACTIVATE(X)
ACTIVATE(n__fst(X1, X2)) → ACTIVATE(X1)
ACTIVATE(n__fst(X1, X2)) → ACTIVATE(X2)
ACTIVATE(n__from(X)) → ACTIVATE(X)
ACTIVATE(n__add(X1, X2)) → ADD(activate(X1), activate(X2))
ADD(s(X), Y) → ACTIVATE(X)
ACTIVATE(n__add(X1, X2)) → ACTIVATE(X1)
ACTIVATE(n__add(X1, X2)) → ACTIVATE(X2)
ACTIVATE(n__len(X)) → LEN(activate(X))
LEN(cons(X, Z)) → ACTIVATE(Z)
ACTIVATE(n__len(X)) → ACTIVATE(X)
FST(s(X), cons(Y, Z)) → ACTIVATE(Z)

The TRS R consists of the following rules:

fst(0, Z) → nil
fst(s(X), cons(Y, Z)) → cons(Y, n__fst(activate(X), activate(Z)))
from(X) → cons(X, n__from(n__s(X)))
add(0, X) → X
add(s(X), Y) → s(n__add(activate(X), Y))
len(nil) → 0
len(cons(X, Z)) → s(n__len(activate(Z)))
fst(X1, X2) → n__fst(X1, X2)
from(X) → n__from(X)
s(X) → n__s(X)
add(X1, X2) → n__add(X1, X2)
len(X) → n__len(X)
activate(n__fst(X1, X2)) → fst(activate(X1), activate(X2))
activate(n__from(X)) → from(activate(X))
activate(n__s(X)) → s(X)
activate(n__add(X1, X2)) → add(activate(X1), activate(X2))
activate(n__len(X)) → len(activate(X))
activate(X) → X

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(5) QDPSizeChangeProof (EQUIVALENT transformation)

We used the following order and afs together with the size-change analysis [AAECC05] to show that there are no infinite chains for this DP problem.

Order:Combined order from the following AFS and order.
activate(x1)  =  x1
n__fst(x1, x2)  =  n__fst(x1, x2)
fst(x1, x2)  =  fst(x1, x2)
n__from(x1)  =  n__from(x1)
from(x1)  =  from(x1)
n__s(x1)  =  x1
s(x1)  =  x1
n__add(x1, x2)  =  n__add(x1, x2)
add(x1, x2)  =  add(x1, x2)
n__len(x1)  =  n__len(x1)
len(x1)  =  len(x1)
cons(x1, x2)  =  x2
0  =  0
nil  =  nil

Recursive path order with status [RPO].
Quasi-Precedence:

[nfst2, fst2] > [0, nil]
[nfrom1, from1]
[nadd2, add2]
[nlen1, len1]

Status:
nfst2: multiset
fst2: multiset
nfrom1: multiset
from1: multiset
nadd2: [2,1]
add2: [2,1]
nlen1: [1]
len1: [1]
0: multiset
nil: multiset

AFS:
activate(x1)  =  x1
n__fst(x1, x2)  =  n__fst(x1, x2)
fst(x1, x2)  =  fst(x1, x2)
n__from(x1)  =  n__from(x1)
from(x1)  =  from(x1)
n__s(x1)  =  x1
s(x1)  =  x1
n__add(x1, x2)  =  n__add(x1, x2)
add(x1, x2)  =  add(x1, x2)
n__len(x1)  =  n__len(x1)
len(x1)  =  len(x1)
cons(x1, x2)  =  x2
0  =  0
nil  =  nil

From the DPs we obtained the following set of size-change graphs:

  • ACTIVATE(n__fst(X1, X2)) → FST(activate(X1), activate(X2)) (allowed arguments on rhs = {1, 2})
    The graph contains the following edges 1 > 1, 1 > 2

  • ADD(s(X), Y) → ACTIVATE(X) (allowed arguments on rhs = {1})
    The graph contains the following edges 1 >= 1

  • LEN(cons(X, Z)) → ACTIVATE(Z) (allowed arguments on rhs = {1})
    The graph contains the following edges 1 >= 1

  • ACTIVATE(n__add(X1, X2)) → ADD(activate(X1), activate(X2)) (allowed arguments on rhs = {1})
    The graph contains the following edges 1 > 1

  • ACTIVATE(n__len(X)) → LEN(activate(X)) (allowed arguments on rhs = {1})
    The graph contains the following edges 1 > 1

  • FST(s(X), cons(Y, Z)) → ACTIVATE(X) (allowed arguments on rhs = {1})
    The graph contains the following edges 1 >= 1

  • FST(s(X), cons(Y, Z)) → ACTIVATE(Z) (allowed arguments on rhs = {1})
    The graph contains the following edges 2 >= 1

  • ACTIVATE(n__fst(X1, X2)) → ACTIVATE(X1) (allowed arguments on rhs = {1})
    The graph contains the following edges 1 > 1

  • ACTIVATE(n__fst(X1, X2)) → ACTIVATE(X2) (allowed arguments on rhs = {1})
    The graph contains the following edges 1 > 1

  • ACTIVATE(n__from(X)) → ACTIVATE(X) (allowed arguments on rhs = {1})
    The graph contains the following edges 1 > 1

  • ACTIVATE(n__add(X1, X2)) → ACTIVATE(X1) (allowed arguments on rhs = {1})
    The graph contains the following edges 1 > 1

  • ACTIVATE(n__add(X1, X2)) → ACTIVATE(X2) (allowed arguments on rhs = {1})
    The graph contains the following edges 1 > 1

  • ACTIVATE(n__len(X)) → ACTIVATE(X) (allowed arguments on rhs = {1})
    The graph contains the following edges 1 > 1

We oriented the following set of usable rules [AAECC05,FROCOS05].


activate(n__fst(X1, X2)) → fst(activate(X1), activate(X2))
activate(n__from(X)) → from(activate(X))
activate(n__s(X)) → s(X)
activate(n__add(X1, X2)) → add(activate(X1), activate(X2))
activate(n__len(X)) → len(activate(X))
activate(X) → X
fst(s(X), cons(Y, Z)) → cons(Y, n__fst(activate(X), activate(Z)))
add(s(X), Y) → s(n__add(activate(X), Y))
len(cons(X, Z)) → s(n__len(activate(Z)))
from(X) → cons(X, n__from(n__s(X)))
from(X) → n__from(X)
fst(0, Z) → nil
fst(X1, X2) → n__fst(X1, X2)
add(0, X) → X
add(X1, X2) → n__add(X1, X2)
len(nil) → 0
len(X) → n__len(X)
s(X) → n__s(X)

(6) TRUE