(0) Obligation:

Q restricted rewrite system:
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.

(1) DependencyPairsProof (EQUIVALENT transformation)

Using Dependency Pairs [AG00,LPAR04] we result in the following initial DP problem.

(2) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
ACTIVE(U11(tt, V2)) → U121(isNat(V2))
ACTIVE(U11(tt, V2)) → ISNAT(V2)
ACTIVE(U12(tt)) → MARK(tt)
ACTIVE(U21(tt)) → MARK(tt)
ACTIVE(U31(tt, N)) → MARK(N)
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
ACTIVE(U41(tt, M, N)) → U421(isNat(N), M, N)
ACTIVE(U41(tt, M, N)) → ISNAT(N)
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
ACTIVE(U42(tt, M, N)) → S(plus(N, M))
ACTIVE(U42(tt, M, N)) → PLUS(N, M)
ACTIVE(isNat(0)) → MARK(tt)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(plus(V1, V2))) → U111(isNat(V1), V2)
ACTIVE(isNat(plus(V1, V2))) → ISNAT(V1)
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(isNat(s(V1))) → U211(isNat(V1))
ACTIVE(isNat(s(V1))) → ISNAT(V1)
ACTIVE(plus(N, 0)) → MARK(U31(isNat(N), N))
ACTIVE(plus(N, 0)) → U311(isNat(N), N)
ACTIVE(plus(N, 0)) → ISNAT(N)
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
ACTIVE(plus(N, s(M))) → U411(isNat(M), M, N)
ACTIVE(plus(N, s(M))) → ISNAT(M)
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(U11(X1, X2)) → U111(mark(X1), X2)
MARK(U11(X1, X2)) → MARK(X1)
MARK(tt) → ACTIVE(tt)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(U12(X)) → U121(mark(X))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U21(X)) → U211(mark(X))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(U31(X1, X2)) → U311(mark(X1), X2)
MARK(U31(X1, X2)) → MARK(X1)
MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
MARK(U41(X1, X2, X3)) → U411(mark(X1), X2, X3)
MARK(U41(X1, X2, X3)) → MARK(X1)
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
MARK(U42(X1, X2, X3)) → U421(mark(X1), X2, X3)
MARK(U42(X1, X2, X3)) → MARK(X1)
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(s(X)) → S(mark(X))
MARK(s(X)) → MARK(X)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(plus(X1, X2)) → PLUS(mark(X1), mark(X2))
MARK(plus(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
MARK(0) → ACTIVE(0)
U111(mark(X1), X2) → U111(X1, X2)
U111(X1, mark(X2)) → U111(X1, X2)
U111(active(X1), X2) → U111(X1, X2)
U111(X1, active(X2)) → U111(X1, X2)
U121(mark(X)) → U121(X)
U121(active(X)) → U121(X)
ISNAT(mark(X)) → ISNAT(X)
ISNAT(active(X)) → ISNAT(X)
U211(mark(X)) → U211(X)
U211(active(X)) → U211(X)
U311(mark(X1), X2) → U311(X1, X2)
U311(X1, mark(X2)) → U311(X1, X2)
U311(active(X1), X2) → U311(X1, X2)
U311(X1, active(X2)) → U311(X1, X2)
U411(mark(X1), X2, X3) → U411(X1, X2, X3)
U411(X1, mark(X2), X3) → U411(X1, X2, X3)
U411(X1, X2, mark(X3)) → U411(X1, X2, X3)
U411(active(X1), X2, X3) → U411(X1, X2, X3)
U411(X1, active(X2), X3) → U411(X1, X2, X3)
U411(X1, X2, active(X3)) → U411(X1, X2, X3)
U421(mark(X1), X2, X3) → U421(X1, X2, X3)
U421(X1, mark(X2), X3) → U421(X1, X2, X3)
U421(X1, X2, mark(X3)) → U421(X1, X2, X3)
U421(active(X1), X2, X3) → U421(X1, X2, X3)
U421(X1, active(X2), X3) → U421(X1, X2, X3)
U421(X1, X2, active(X3)) → U421(X1, X2, X3)
S(mark(X)) → S(X)
S(active(X)) → S(X)
PLUS(mark(X1), X2) → PLUS(X1, X2)
PLUS(X1, mark(X2)) → PLUS(X1, X2)
PLUS(active(X1), X2) → PLUS(X1, X2)
PLUS(X1, active(X2)) → PLUS(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(3) DependencyGraphProof (EQUIVALENT transformation)

The approximation of the Dependency Graph [LPAR04,FROCOS05,EDGSTAR] contains 10 SCCs with 27 less nodes.

(4) Complex Obligation (AND)

(5) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PLUS(X1, mark(X2)) → PLUS(X1, X2)
PLUS(mark(X1), X2) → PLUS(X1, X2)
PLUS(active(X1), X2) → PLUS(X1, X2)
PLUS(X1, active(X2)) → PLUS(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(6) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


PLUS(X1, active(X2)) → PLUS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
PLUS(x1, x2)  =  PLUS(x2)
mark(x1)  =  x1
active(x1)  =  active(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
PLUS1: multiset
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(7) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PLUS(X1, mark(X2)) → PLUS(X1, X2)
PLUS(mark(X1), X2) → PLUS(X1, X2)
PLUS(active(X1), X2) → PLUS(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(8) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


PLUS(active(X1), X2) → PLUS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
PLUS(x1, x2)  =  PLUS(x1)
mark(x1)  =  x1
active(x1)  =  active(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
PLUS1: multiset
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(9) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PLUS(X1, mark(X2)) → PLUS(X1, X2)
PLUS(mark(X1), X2) → PLUS(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(10) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


PLUS(X1, mark(X2)) → PLUS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
PLUS(x1, x2)  =  PLUS(x2)
mark(x1)  =  mark(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
mark1 > PLUS1

Status:
PLUS1: multiset
mark1: [1]


The following usable rules [FROCOS05] were oriented: none

(11) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PLUS(mark(X1), X2) → PLUS(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(12) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


PLUS(mark(X1), X2) → PLUS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
[PLUS2, mark1]

Status:
PLUS2: [2,1]
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(13) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(14) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(15) TRUE

(16) Obligation:

Q DP problem:
The TRS P consists of the following rules:

S(active(X)) → S(X)
S(mark(X)) → S(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(17) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


S(active(X)) → S(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
S(x1)  =  x1
active(x1)  =  active(x1)
mark(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(18) Obligation:

Q DP problem:
The TRS P consists of the following rules:

S(mark(X)) → S(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(19) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


S(mark(X)) → S(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
S(x1)  =  x1
mark(x1)  =  mark(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(20) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(21) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(22) TRUE

(23) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U421(X1, mark(X2), X3) → U421(X1, X2, X3)
U421(mark(X1), X2, X3) → U421(X1, X2, X3)
U421(X1, X2, mark(X3)) → U421(X1, X2, X3)
U421(active(X1), X2, X3) → U421(X1, X2, X3)
U421(X1, active(X2), X3) → U421(X1, X2, X3)
U421(X1, X2, active(X3)) → U421(X1, X2, X3)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(24) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U421(mark(X1), X2, X3) → U421(X1, X2, X3)
U421(active(X1), X2, X3) → U421(X1, X2, X3)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U421(x1, x2, x3)  =  x1
mark(x1)  =  mark(x1)
active(x1)  =  active(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
mark1: multiset
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(25) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U421(X1, mark(X2), X3) → U421(X1, X2, X3)
U421(X1, X2, mark(X3)) → U421(X1, X2, X3)
U421(X1, active(X2), X3) → U421(X1, X2, X3)
U421(X1, X2, active(X3)) → U421(X1, X2, X3)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(26) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U421(X1, mark(X2), X3) → U421(X1, X2, X3)
U421(X1, X2, mark(X3)) → U421(X1, X2, X3)
U421(X1, active(X2), X3) → U421(X1, X2, X3)
U421(X1, X2, active(X3)) → U421(X1, X2, X3)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U421(x1, x2, x3)  =  U421(x2, x3)
mark(x1)  =  mark(x1)
active(x1)  =  active(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
mark1 > U42^12
active1 > U42^12

Status:
U42^12: multiset
mark1: multiset
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(27) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(28) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(29) TRUE

(30) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U411(X1, mark(X2), X3) → U411(X1, X2, X3)
U411(mark(X1), X2, X3) → U411(X1, X2, X3)
U411(X1, X2, mark(X3)) → U411(X1, X2, X3)
U411(active(X1), X2, X3) → U411(X1, X2, X3)
U411(X1, active(X2), X3) → U411(X1, X2, X3)
U411(X1, X2, active(X3)) → U411(X1, X2, X3)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(31) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U411(mark(X1), X2, X3) → U411(X1, X2, X3)
U411(active(X1), X2, X3) → U411(X1, X2, X3)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U411(x1, x2, x3)  =  x1
mark(x1)  =  mark(x1)
active(x1)  =  active(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
mark1: multiset
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(32) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U411(X1, mark(X2), X3) → U411(X1, X2, X3)
U411(X1, X2, mark(X3)) → U411(X1, X2, X3)
U411(X1, active(X2), X3) → U411(X1, X2, X3)
U411(X1, X2, active(X3)) → U411(X1, X2, X3)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(33) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U411(X1, mark(X2), X3) → U411(X1, X2, X3)
U411(X1, X2, mark(X3)) → U411(X1, X2, X3)
U411(X1, active(X2), X3) → U411(X1, X2, X3)
U411(X1, X2, active(X3)) → U411(X1, X2, X3)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U411(x1, x2, x3)  =  U411(x2, x3)
mark(x1)  =  mark(x1)
active(x1)  =  active(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
mark1 > U41^12
active1 > U41^12

Status:
U41^12: multiset
mark1: multiset
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(34) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(35) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(36) TRUE

(37) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U311(X1, mark(X2)) → U311(X1, X2)
U311(mark(X1), X2) → U311(X1, X2)
U311(active(X1), X2) → U311(X1, X2)
U311(X1, active(X2)) → U311(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(38) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U311(X1, active(X2)) → U311(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U311(x1, x2)  =  U311(x2)
mark(x1)  =  x1
active(x1)  =  active(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
U31^11: multiset
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(39) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U311(X1, mark(X2)) → U311(X1, X2)
U311(mark(X1), X2) → U311(X1, X2)
U311(active(X1), X2) → U311(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(40) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U311(active(X1), X2) → U311(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U311(x1, x2)  =  U311(x1)
mark(x1)  =  x1
active(x1)  =  active(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
U31^11: multiset
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(41) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U311(X1, mark(X2)) → U311(X1, X2)
U311(mark(X1), X2) → U311(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(42) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U311(X1, mark(X2)) → U311(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U311(x1, x2)  =  U311(x2)
mark(x1)  =  mark(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
mark1 > U31^11

Status:
U31^11: multiset
mark1: [1]


The following usable rules [FROCOS05] were oriented: none

(43) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U311(mark(X1), X2) → U311(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(44) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U311(mark(X1), X2) → U311(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
[U31^12, mark1]

Status:
U31^12: [2,1]
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(45) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(46) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(47) TRUE

(48) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U211(active(X)) → U211(X)
U211(mark(X)) → U211(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(49) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U211(active(X)) → U211(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U211(x1)  =  x1
active(x1)  =  active(x1)
mark(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(50) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U211(mark(X)) → U211(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(51) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U211(mark(X)) → U211(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U211(x1)  =  x1
mark(x1)  =  mark(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(52) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(53) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(54) TRUE

(55) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ISNAT(active(X)) → ISNAT(X)
ISNAT(mark(X)) → ISNAT(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(56) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ISNAT(active(X)) → ISNAT(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
ISNAT(x1)  =  x1
active(x1)  =  active(x1)
mark(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(57) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ISNAT(mark(X)) → ISNAT(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(58) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ISNAT(mark(X)) → ISNAT(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
ISNAT(x1)  =  x1
mark(x1)  =  mark(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(59) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(60) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(61) TRUE

(62) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U121(active(X)) → U121(X)
U121(mark(X)) → U121(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(63) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U121(active(X)) → U121(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U121(x1)  =  x1
active(x1)  =  active(x1)
mark(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(64) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U121(mark(X)) → U121(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(65) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U121(mark(X)) → U121(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U121(x1)  =  x1
mark(x1)  =  mark(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(66) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(67) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(68) TRUE

(69) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U111(X1, mark(X2)) → U111(X1, X2)
U111(mark(X1), X2) → U111(X1, X2)
U111(active(X1), X2) → U111(X1, X2)
U111(X1, active(X2)) → U111(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(70) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U111(X1, active(X2)) → U111(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U111(x1, x2)  =  U111(x2)
mark(x1)  =  x1
active(x1)  =  active(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
U11^11: multiset
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(71) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U111(X1, mark(X2)) → U111(X1, X2)
U111(mark(X1), X2) → U111(X1, X2)
U111(active(X1), X2) → U111(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(72) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U111(active(X1), X2) → U111(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U111(x1, x2)  =  U111(x1)
mark(x1)  =  x1
active(x1)  =  active(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
U11^11: multiset
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(73) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U111(X1, mark(X2)) → U111(X1, X2)
U111(mark(X1), X2) → U111(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(74) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U111(X1, mark(X2)) → U111(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U111(x1, x2)  =  U111(x2)
mark(x1)  =  mark(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
mark1 > U11^11

Status:
U11^11: multiset
mark1: [1]


The following usable rules [FROCOS05] were oriented: none

(75) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U111(mark(X1), X2) → U111(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(76) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U111(mark(X1), X2) → U111(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
[U11^12, mark1]

Status:
U11^12: [2,1]
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(77) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(78) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(79) TRUE

(80) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
ACTIVE(U31(tt, N)) → MARK(N)
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U31(X1, X2)) → MARK(X1)
MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U41(X1, X2, X3)) → MARK(X1)
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
ACTIVE(plus(N, 0)) → MARK(U31(isNat(N), N))
MARK(U42(X1, X2, X3)) → MARK(X1)
MARK(s(X)) → ACTIVE(s(mark(X)))
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
MARK(s(X)) → MARK(X)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(plus(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(81) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(s(X)) → ACTIVE(s(mark(X)))
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  MARK
U11(x1, x2)  =  U11
ACTIVE(x1)  =  x1
mark(x1)  =  mark(x1)
tt  =  tt
U12(x1)  =  U12
isNat(x1)  =  isNat
U31(x1, x2)  =  U31
U41(x1, x2, x3)  =  U41
U42(x1, x2, x3)  =  U42
U21(x1)  =  U21
s(x1)  =  s
plus(x1, x2)  =  plus
0  =  0
active(x1)  =  active(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
[tt, 0] > [MARK, U11, isNat, U31, U41, U42, plus] > [mark1, U12, U21, s, active1]

Status:
MARK: multiset
U11: multiset
mark1: multiset
tt: multiset
U12: multiset
isNat: multiset
U31: multiset
U41: multiset
U42: multiset
U21: multiset
s: []
plus: multiset
0: multiset
active1: multiset


The following usable rules [FROCOS05] were oriented:

U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
plus(X1, mark(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)

(82) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
ACTIVE(U31(tt, N)) → MARK(N)
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U31(X1, X2)) → MARK(X1)
MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U41(X1, X2, X3)) → MARK(X1)
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
ACTIVE(plus(N, 0)) → MARK(U31(isNat(N), N))
MARK(U42(X1, X2, X3)) → MARK(X1)
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
MARK(s(X)) → MARK(X)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(plus(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(83) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ACTIVE(U31(tt, N)) → MARK(N)
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U31(X1, X2)) → MARK(X1)
MARK(U41(X1, X2, X3)) → MARK(X1)
ACTIVE(plus(N, 0)) → MARK(U31(isNat(N), N))
MARK(U42(X1, X2, X3)) → MARK(X1)
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
MARK(s(X)) → MARK(X)
MARK(plus(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  MARK(x1)
U11(x1, x2)  =  x1
ACTIVE(x1)  =  ACTIVE(x1)
mark(x1)  =  x1
tt  =  tt
U12(x1)  =  x1
isNat(x1)  =  isNat
U31(x1, x2)  =  U31(x1, x2)
U41(x1, x2, x3)  =  U41(x1, x2, x3)
U42(x1, x2, x3)  =  U42(x1, x2, x3)
s(x1)  =  s(x1)
plus(x1, x2)  =  plus(x1, x2)
U21(x1)  =  x1
0  =  0
active(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[U413, U423, plus2] > [MARK1, ACTIVE1] > U312
[U413, U423, plus2] > [MARK1, ACTIVE1] > s1 > [tt, isNat, 0]

Status:
MARK1: multiset
ACTIVE1: multiset
tt: multiset
isNat: multiset
U312: multiset
U413: multiset
U423: multiset
s1: multiset
plus2: multiset
0: multiset


The following usable rules [FROCOS05] were oriented:

mark(U11(X1, X2)) → active(U11(mark(X1), X2))
active(U11(tt, V2)) → mark(U12(isNat(V2)))
mark(U12(X)) → active(U12(mark(X)))
active(U31(tt, N)) → mark(N)
mark(isNat(X)) → active(isNat(X))
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
mark(U21(X)) → active(U21(mark(X)))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
active(plus(N, 0)) → mark(U31(isNat(N), N))
mark(s(X)) → active(s(mark(X)))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(tt) → active(tt)
mark(0) → active(0)
U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
plus(X1, mark(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(isNat(0)) → mark(tt)

(84) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(85) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  x1
U11(x1, x2)  =  x1
ACTIVE(x1)  =  ACTIVE
mark(x1)  =  mark(x1)
tt  =  tt
U12(x1)  =  x1
isNat(x1)  =  isNat
U41(x1, x2, x3)  =  U41
U42(x1, x2, x3)  =  x1
U21(x1)  =  x1
U31(x1, x2)  =  U31(x2)
plus(x1, x2)  =  x2
s(x1)  =  s
active(x1)  =  active(x1)
0  =  0

Recursive path order with status [RPO].
Quasi-Precedence:
[tt, 0] > s > [ACTIVE, mark1, isNat, U41, U311, active1]

Status:
ACTIVE: multiset
mark1: multiset
tt: multiset
isNat: multiset
U41: multiset
U311: multiset
s: multiset
active1: multiset
0: multiset


The following usable rules [FROCOS05] were oriented:

U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)

(86) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(87) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  x1
U11(x1, x2)  =  x1
ACTIVE(x1)  =  ACTIVE
mark(x1)  =  mark(x1)
tt  =  tt
U12(x1)  =  x1
isNat(x1)  =  isNat
U41(x1, x2, x3)  =  U41(x3)
U42(x1, x2, x3)  =  x1
U21(x1)  =  x1
plus(x1, x2)  =  x2
s(x1)  =  s
active(x1)  =  active(x1)
U31(x1, x2)  =  U31(x2)
0  =  0

Recursive path order with status [RPO].
Quasi-Precedence:
[tt, 0] > s > [ACTIVE, mark1, isNat, U411, active1, U311]

Status:
ACTIVE: multiset
mark1: multiset
tt: multiset
isNat: multiset
U411: multiset
s: multiset
active1: multiset
U311: multiset
0: multiset


The following usable rules [FROCOS05] were oriented:

U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)

(88) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(89) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  x1
U11(x1, x2)  =  x1
ACTIVE(x1)  =  ACTIVE
mark(x1)  =  mark(x1)
tt  =  tt
U12(x1)  =  x1
isNat(x1)  =  isNat
U41(x1, x2, x3)  =  U41(x2, x3)
U42(x1, x2, x3)  =  x1
U21(x1)  =  x1
plus(x1, x2)  =  plus(x2)
s(x1)  =  s
active(x1)  =  x1
U31(x1, x2)  =  U31(x2)
0  =  0

Recursive path order with status [RPO].
Quasi-Precedence:
[tt, 0] > plus1 > [ACTIVE, mark1, isNat, U412, U311]
[tt, 0] > s > [ACTIVE, mark1, isNat, U412, U311]

Status:
ACTIVE: multiset
mark1: [1]
tt: multiset
isNat: multiset
U412: [2,1]
plus1: multiset
s: multiset
U311: multiset
0: multiset


The following usable rules [FROCOS05] were oriented:

U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)

(90) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(91) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  MARK
U11(x1, x2)  =  U11
ACTIVE(x1)  =  x1
mark(x1)  =  mark(x1)
tt  =  tt
U12(x1)  =  U12(x1)
isNat(x1)  =  isNat
U41(x1, x2, x3)  =  U41(x2, x3)
U42(x1, x2, x3)  =  U42
U21(x1)  =  U21(x1)
plus(x1, x2)  =  plus(x1, x2)
s(x1)  =  s(x1)
active(x1)  =  x1
U31(x1, x2)  =  U31(x2)
0  =  0

Recursive path order with status [RPO].
Quasi-Precedence:
[tt, 0] > plus2 > [MARK, U11, mark1, U121, isNat, U412, U42, U211, U311]
[tt, 0] > s1 > [MARK, U11, mark1, U121, isNat, U412, U42, U211, U311]

Status:
MARK: multiset
U11: multiset
mark1: multiset
tt: multiset
U121: multiset
isNat: multiset
U412: [1,2]
U42: multiset
U211: multiset
plus2: multiset
s1: multiset
U311: multiset
0: multiset


The following usable rules [FROCOS05] were oriented:

U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)

(92) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(93) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  x1
U11(x1, x2)  =  x1
ACTIVE(x1)  =  ACTIVE
mark(x1)  =  x1
tt  =  tt
U12(x1)  =  x1
isNat(x1)  =  isNat
U21(x1)  =  x1
plus(x1, x2)  =  plus(x1, x2)
s(x1)  =  s(x1)
U42(x1, x2, x3)  =  U42(x3)
active(x1)  =  x1
U31(x1, x2)  =  U31(x2)
U41(x1, x2, x3)  =  U41(x1, x2, x3)
0  =  0

Recursive path order with status [RPO].
Quasi-Precedence:
[tt, 0] > plus2 > [ACTIVE, isNat, U421, U311, U413]
[tt, 0] > s1 > [ACTIVE, isNat, U421, U311, U413]

Status:
ACTIVE: multiset
tt: multiset
isNat: multiset
plus2: multiset
s1: multiset
U421: multiset
U311: multiset
U413: multiset
0: multiset


The following usable rules [FROCOS05] were oriented:

U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)

(94) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(95) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  MARK(x1)
U11(x1, x2)  =  U11(x1, x2)
ACTIVE(x1)  =  ACTIVE(x1)
mark(x1)  =  x1
tt  =  tt
U12(x1)  =  x1
isNat(x1)  =  x1
U21(x1)  =  x1
plus(x1, x2)  =  plus(x1, x2)
s(x1)  =  x1
active(x1)  =  x1
U31(x1, x2)  =  x2
U41(x1, x2, x3)  =  U41(x2, x3)
U42(x1, x2, x3)  =  U42(x2, x3)
0  =  0

Recursive path order with status [RPO].
Quasi-Precedence:
[plus2, U412, U422] > U112 > [MARK1, ACTIVE1]
0 > tt

Status:
MARK1: multiset
U112: multiset
ACTIVE1: multiset
tt: multiset
plus2: multiset
U412: multiset
U422: multiset
0: multiset


The following usable rules [FROCOS05] were oriented:

mark(U11(X1, X2)) → active(U11(mark(X1), X2))
active(U11(tt, V2)) → mark(U12(isNat(V2)))
mark(U12(X)) → active(U12(mark(X)))
active(U31(tt, N)) → mark(N)
mark(isNat(X)) → active(isNat(X))
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
mark(U21(X)) → active(U21(mark(X)))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
active(plus(N, 0)) → mark(U31(isNat(N), N))
mark(s(X)) → active(s(mark(X)))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(tt) → active(tt)
mark(0) → active(0)
U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(isNat(0)) → mark(tt)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
plus(X1, mark(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
U31(X1, mark(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)

(96) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(97) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MARK(U12(X)) → MARK(X)
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  MARK(x1)
U11(x1, x2)  =  U11(x2)
ACTIVE(x1)  =  ACTIVE(x1)
mark(x1)  =  mark(x1)
U12(x1)  =  U12(x1)
isNat(x1)  =  isNat(x1)
U21(x1)  =  U21(x1)
s(x1)  =  s(x1)
active(x1)  =  active(x1)
tt  =  tt
U31(x1, x2)  =  U31(x2)
U41(x1, x2, x3)  =  x1
U42(x1, x2, x3)  =  x1
plus(x1, x2)  =  plus(x1, x2)
0  =  0

Recursive path order with status [RPO].
Quasi-Precedence:
[tt, 0] > s1 > [MARK1, U111, ACTIVE1, mark1, U121, isNat1, U211, active1, U311]
[tt, 0] > plus2 > [MARK1, U111, ACTIVE1, mark1, U121, isNat1, U211, active1, U311]

Status:
MARK1: multiset
U111: multiset
ACTIVE1: multiset
mark1: multiset
U121: multiset
isNat1: multiset
U211: multiset
s1: multiset
active1: multiset
tt: multiset
U311: multiset
plus2: multiset
0: multiset


The following usable rules [FROCOS05] were oriented:

U11(X1, mark(X2)) → U11(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)

(98) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(isNat(X)) → ACTIVE(isNat(X))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(99) DependencyGraphProof (EQUIVALENT transformation)

The approximation of the Dependency Graph [LPAR04,FROCOS05,EDGSTAR] contains 0 SCCs with 2 less nodes.

(100) TRUE