(0) Obligation:

Q restricted rewrite system:
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.

(1) DependencyPairsProof (EQUIVALENT transformation)

Using Dependency Pairs [AG00,LPAR04] we result in the following initial DP problem.

(2) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
ACTIVE(U11(tt, V2)) → U121(isNat(V2))
ACTIVE(U11(tt, V2)) → ISNAT(V2)
ACTIVE(U12(tt)) → MARK(tt)
ACTIVE(U21(tt)) → MARK(tt)
ACTIVE(U31(tt, N)) → MARK(N)
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
ACTIVE(U41(tt, M, N)) → U421(isNat(N), M, N)
ACTIVE(U41(tt, M, N)) → ISNAT(N)
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
ACTIVE(U42(tt, M, N)) → S(plus(N, M))
ACTIVE(U42(tt, M, N)) → PLUS(N, M)
ACTIVE(isNat(0)) → MARK(tt)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(plus(V1, V2))) → U111(isNat(V1), V2)
ACTIVE(isNat(plus(V1, V2))) → ISNAT(V1)
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(isNat(s(V1))) → U211(isNat(V1))
ACTIVE(isNat(s(V1))) → ISNAT(V1)
ACTIVE(plus(N, 0)) → MARK(U31(isNat(N), N))
ACTIVE(plus(N, 0)) → U311(isNat(N), N)
ACTIVE(plus(N, 0)) → ISNAT(N)
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
ACTIVE(plus(N, s(M))) → U411(isNat(M), M, N)
ACTIVE(plus(N, s(M))) → ISNAT(M)
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(U11(X1, X2)) → U111(mark(X1), X2)
MARK(U11(X1, X2)) → MARK(X1)
MARK(tt) → ACTIVE(tt)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(U12(X)) → U121(mark(X))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U21(X)) → U211(mark(X))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(U31(X1, X2)) → U311(mark(X1), X2)
MARK(U31(X1, X2)) → MARK(X1)
MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
MARK(U41(X1, X2, X3)) → U411(mark(X1), X2, X3)
MARK(U41(X1, X2, X3)) → MARK(X1)
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
MARK(U42(X1, X2, X3)) → U421(mark(X1), X2, X3)
MARK(U42(X1, X2, X3)) → MARK(X1)
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(s(X)) → S(mark(X))
MARK(s(X)) → MARK(X)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(plus(X1, X2)) → PLUS(mark(X1), mark(X2))
MARK(plus(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
MARK(0) → ACTIVE(0)
U111(mark(X1), X2) → U111(X1, X2)
U111(X1, mark(X2)) → U111(X1, X2)
U111(active(X1), X2) → U111(X1, X2)
U111(X1, active(X2)) → U111(X1, X2)
U121(mark(X)) → U121(X)
U121(active(X)) → U121(X)
ISNAT(mark(X)) → ISNAT(X)
ISNAT(active(X)) → ISNAT(X)
U211(mark(X)) → U211(X)
U211(active(X)) → U211(X)
U311(mark(X1), X2) → U311(X1, X2)
U311(X1, mark(X2)) → U311(X1, X2)
U311(active(X1), X2) → U311(X1, X2)
U311(X1, active(X2)) → U311(X1, X2)
U411(mark(X1), X2, X3) → U411(X1, X2, X3)
U411(X1, mark(X2), X3) → U411(X1, X2, X3)
U411(X1, X2, mark(X3)) → U411(X1, X2, X3)
U411(active(X1), X2, X3) → U411(X1, X2, X3)
U411(X1, active(X2), X3) → U411(X1, X2, X3)
U411(X1, X2, active(X3)) → U411(X1, X2, X3)
U421(mark(X1), X2, X3) → U421(X1, X2, X3)
U421(X1, mark(X2), X3) → U421(X1, X2, X3)
U421(X1, X2, mark(X3)) → U421(X1, X2, X3)
U421(active(X1), X2, X3) → U421(X1, X2, X3)
U421(X1, active(X2), X3) → U421(X1, X2, X3)
U421(X1, X2, active(X3)) → U421(X1, X2, X3)
S(mark(X)) → S(X)
S(active(X)) → S(X)
PLUS(mark(X1), X2) → PLUS(X1, X2)
PLUS(X1, mark(X2)) → PLUS(X1, X2)
PLUS(active(X1), X2) → PLUS(X1, X2)
PLUS(X1, active(X2)) → PLUS(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(3) DependencyGraphProof (EQUIVALENT transformation)

The approximation of the Dependency Graph [LPAR04,FROCOS05,EDGSTAR] contains 10 SCCs with 27 less nodes.

(4) Complex Obligation (AND)

(5) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PLUS(X1, mark(X2)) → PLUS(X1, X2)
PLUS(mark(X1), X2) → PLUS(X1, X2)
PLUS(active(X1), X2) → PLUS(X1, X2)
PLUS(X1, active(X2)) → PLUS(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(6) Obligation:

Q DP problem:
The TRS P consists of the following rules:

S(active(X)) → S(X)
S(mark(X)) → S(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(7) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U421(X1, mark(X2), X3) → U421(X1, X2, X3)
U421(mark(X1), X2, X3) → U421(X1, X2, X3)
U421(X1, X2, mark(X3)) → U421(X1, X2, X3)
U421(active(X1), X2, X3) → U421(X1, X2, X3)
U421(X1, active(X2), X3) → U421(X1, X2, X3)
U421(X1, X2, active(X3)) → U421(X1, X2, X3)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(8) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U411(X1, mark(X2), X3) → U411(X1, X2, X3)
U411(mark(X1), X2, X3) → U411(X1, X2, X3)
U411(X1, X2, mark(X3)) → U411(X1, X2, X3)
U411(active(X1), X2, X3) → U411(X1, X2, X3)
U411(X1, active(X2), X3) → U411(X1, X2, X3)
U411(X1, X2, active(X3)) → U411(X1, X2, X3)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(9) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U311(X1, mark(X2)) → U311(X1, X2)
U311(mark(X1), X2) → U311(X1, X2)
U311(active(X1), X2) → U311(X1, X2)
U311(X1, active(X2)) → U311(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(10) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U211(active(X)) → U211(X)
U211(mark(X)) → U211(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(11) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ISNAT(active(X)) → ISNAT(X)
ISNAT(mark(X)) → ISNAT(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(12) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U121(active(X)) → U121(X)
U121(mark(X)) → U121(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(13) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U111(X1, mark(X2)) → U111(X1, X2)
U111(mark(X1), X2) → U111(X1, X2)
U111(active(X1), X2) → U111(X1, X2)
U111(X1, active(X2)) → U111(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(14) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
ACTIVE(U31(tt, N)) → MARK(N)
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U31(X1, X2)) → MARK(X1)
MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U41(X1, X2, X3)) → MARK(X1)
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
ACTIVE(plus(N, 0)) → MARK(U31(isNat(N), N))
MARK(U42(X1, X2, X3)) → MARK(X1)
MARK(s(X)) → ACTIVE(s(mark(X)))
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
MARK(s(X)) → MARK(X)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(plus(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(15) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ACTIVE(U31(tt, N)) → MARK(N)
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U31(X1, X2)) → MARK(X1)
MARK(U41(X1, X2, X3)) → MARK(X1)
ACTIVE(plus(N, 0)) → MARK(U31(isNat(N), N))
MARK(U42(X1, X2, X3)) → MARK(X1)
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
MARK(s(X)) → MARK(X)
MARK(plus(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  MARK(x1)
U11(x1, x2)  =  x1
ACTIVE(x1)  =  ACTIVE(x1)
mark(x1)  =  x1
tt  =  tt
U12(x1)  =  x1
isNat(x1)  =  isNat
U31(x1, x2)  =  U31(x1, x2)
U41(x1, x2, x3)  =  U41(x1, x2, x3)
U42(x1, x2, x3)  =  U42(x1, x2, x3)
U21(x1)  =  x1
s(x1)  =  s(x1)
plus(x1, x2)  =  plus(x1, x2)
0  =  0
active(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
0 > [MARK1, ACTIVE1] > [U413, U423, plus2] > [tt, isNat, U312, s1]

Status:
MARK1: multiset
ACTIVE1: multiset
tt: multiset
isNat: []
U312: [2,1]
U413: multiset
U423: multiset
s1: multiset
plus2: multiset
0: multiset


The following usable rules [FROCOS05] were oriented:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

(16) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(17) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  MARK(x1)
U11(x1, x2)  =  x1
ACTIVE(x1)  =  ACTIVE(x1)
mark(x1)  =  x1
tt  =  tt
U12(x1)  =  x1
isNat(x1)  =  isNat
U41(x1, x2, x3)  =  U41(x1, x3)
U42(x1, x2, x3)  =  U42(x1)
U21(x1)  =  x1
U31(x1, x2)  =  U31(x2)
plus(x1, x2)  =  plus(x1)
s(x1)  =  s
active(x1)  =  x1
0  =  0

Recursive path order with status [RPO].
Quasi-Precedence:
[U311, plus1] > [U412, U421] > [MARK1, ACTIVE1] > [tt, isNat, s]

Status:
MARK1: [1]
ACTIVE1: [1]
tt: multiset
isNat: multiset
U412: [1,2]
U421: [1]
U311: [1]
plus1: [1]
s: []
0: multiset


The following usable rules [FROCOS05] were oriented:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

(18) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(19) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  x1
U11(x1, x2)  =  x1
ACTIVE(x1)  =  ACTIVE
mark(x1)  =  x1
tt  =  tt
U12(x1)  =  x1
isNat(x1)  =  isNat
U21(x1)  =  x1
U31(x1, x2)  =  U31(x1, x2)
plus(x1, x2)  =  plus(x1, x2)
U41(x1, x2, x3)  =  x3
s(x1)  =  s
U42(x1, x2, x3)  =  x3
active(x1)  =  x1
0  =  0

Recursive path order with status [RPO].
Quasi-Precedence:
plus2 > [ACTIVE, tt, isNat, U312, s]
0 > [ACTIVE, tt, isNat, U312, s]

Status:
ACTIVE: []
tt: multiset
isNat: []
U312: multiset
plus2: multiset
s: []
0: multiset


The following usable rules [FROCOS05] were oriented:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

(20) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
MARK(s(X)) → ACTIVE(s(mark(X)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(21) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  x1
U11(x1, x2)  =  x1
ACTIVE(x1)  =  ACTIVE
mark(x1)  =  x1
tt  =  tt
U12(x1)  =  x1
isNat(x1)  =  isNat
U21(x1)  =  x1
plus(x1, x2)  =  plus(x1, x2)
U41(x1, x2, x3)  =  U41(x3)
s(x1)  =  s
U42(x1, x2, x3)  =  x1
active(x1)  =  x1
U31(x1, x2)  =  U31(x1, x2)
0  =  0

Recursive path order with status [RPO].
Quasi-Precedence:
[plus2, U411] > U312 > [ACTIVE, tt, isNat, s, 0]

Status:
ACTIVE: []
tt: multiset
isNat: []
plus2: [1,2]
U411: [1]
s: []
U312: [1,2]
0: multiset


The following usable rules [FROCOS05] were oriented:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

(22) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
MARK(s(X)) → ACTIVE(s(mark(X)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(23) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
MARK(s(X)) → ACTIVE(s(mark(X)))
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  x1
U11(x1, x2)  =  x1
ACTIVE(x1)  =  ACTIVE
mark(x1)  =  x1
tt  =  tt
U12(x1)  =  x1
isNat(x1)  =  isNat
U21(x1)  =  x1
plus(x1, x2)  =  plus(x1, x2)
s(x1)  =  s
U42(x1, x2, x3)  =  U42
active(x1)  =  x1
U31(x1, x2)  =  x2
U41(x1, x2, x3)  =  U41(x1, x3)
0  =  0

Recursive path order with status [RPO].
Quasi-Precedence:
[plus2, U412] > [s, U42] > [ACTIVE, tt, isNat]
0 > [ACTIVE, tt, isNat]

Status:
ACTIVE: []
tt: multiset
isNat: []
plus2: multiset
s: []
U42: []
U412: multiset
0: multiset


The following usable rules [FROCOS05] were oriented:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

(24) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(25) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MARK(U12(X)) → ACTIVE(U12(mark(X)))
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  MARK
U11(x1, x2)  =  U11
ACTIVE(x1)  =  x1
mark(x1)  =  x1
tt  =  tt
U12(x1)  =  U12
isNat(x1)  =  isNat
U21(x1)  =  U21
plus(x1, x2)  =  plus(x1, x2)
s(x1)  =  x1
active(x1)  =  x1
U31(x1, x2)  =  x2
U41(x1, x2, x3)  =  U41(x2, x3)
U42(x1, x2, x3)  =  U42(x2, x3)
0  =  0

Recursive path order with status [RPO].
Quasi-Precedence:
[MARK, U11, isNat, U21] > U12 > tt > [plus2, U412, U422]

Status:
MARK: []
U11: []
tt: multiset
U12: []
isNat: []
U21: []
plus2: [1,2]
U412: [2,1]
U422: [2,1]
0: multiset


The following usable rules [FROCOS05] were oriented:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

(26) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(27) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MARK(U21(X)) → ACTIVE(U21(mark(X)))
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  MARK
U11(x1, x2)  =  U11
ACTIVE(x1)  =  x1
mark(x1)  =  x1
tt  =  tt
U12(x1)  =  x1
isNat(x1)  =  isNat
U21(x1)  =  U21
plus(x1, x2)  =  plus(x1, x2)
s(x1)  =  s
active(x1)  =  x1
U31(x1, x2)  =  U31(x2)
U41(x1, x2, x3)  =  U41(x1)
U42(x1, x2, x3)  =  x1
0  =  0

Recursive path order with status [RPO].
Quasi-Precedence:
plus2 > U311
plus2 > U411 > [MARK, U11, isNat] > [tt, U21, s]

Status:
MARK: multiset
U11: multiset
tt: multiset
isNat: multiset
U21: []
plus2: [2,1]
s: []
U311: [1]
U411: [1]
0: multiset


The following usable rules [FROCOS05] were oriented:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

(28) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(29) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
MARK(U11(X1, X2)) → MARK(X1)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  MARK(x1)
U11(x1, x2)  =  U11(x1, x2)
ACTIVE(x1)  =  ACTIVE(x1)
mark(x1)  =  x1
tt  =  tt
U12(x1)  =  x1
isNat(x1)  =  isNat(x1)
U21(x1)  =  x1
plus(x1, x2)  =  plus(x1, x2)
s(x1)  =  x1
active(x1)  =  x1
U31(x1, x2)  =  x2
U41(x1, x2, x3)  =  U41(x2, x3)
U42(x1, x2, x3)  =  U42(x2, x3)
0  =  0

Recursive path order with status [RPO].
Quasi-Precedence:
[MARK1, ACTIVE1] > [U112, isNat1, plus2, U412, U422] > [tt, 0]

Status:
MARK1: multiset
U112: [2,1]
ACTIVE1: multiset
tt: multiset
isNat1: [1]
plus2: [2,1]
U412: [1,2]
U422: [1,2]
0: multiset


The following usable rules [FROCOS05] were oriented:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

(30) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(U12(X)) → MARK(X)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(31) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MARK(U12(X)) → MARK(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  x1
U11(x1, x2)  =  U11(x1, x2)
ACTIVE(x1)  =  x1
mark(x1)  =  x1
U12(x1)  =  U12(x1)
isNat(x1)  =  isNat(x1)
U21(x1)  =  x1
s(x1)  =  x1
active(x1)  =  x1
tt  =  tt
U31(x1, x2)  =  U31(x2)
U41(x1, x2, x3)  =  U41(x2, x3)
U42(x1, x2, x3)  =  U42(x2, x3)
plus(x1, x2)  =  plus(x1, x2)
0  =  0

Recursive path order with status [RPO].
Quasi-Precedence:
[U112, isNat1] > U121 > [tt, 0]
[U412, U422, plus2] > U311

Status:
U112: [2,1]
U121: multiset
isNat1: [1]
tt: multiset
U311: multiset
U412: [1,2]
U422: [1,2]
plus2: [2,1]
0: multiset


The following usable rules [FROCOS05] were oriented:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

(32) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(33) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  MARK
U11(x1, x2)  =  U11
ACTIVE(x1)  =  x1
mark(x1)  =  x1
isNat(x1)  =  isNat
U21(x1)  =  x1
s(x1)  =  s
active(x1)  =  x1
tt  =  tt
U12(x1)  =  U12
U31(x1, x2)  =  x2
U41(x1, x2, x3)  =  x1
U42(x1, x2, x3)  =  U42
plus(x1, x2)  =  plus(x1)
0  =  0

Recursive path order with status [RPO].
Quasi-Precedence:
[MARK, isNat, plus1, 0] > [U11, tt, U12] > U42 > s

Status:
MARK: []
U11: []
isNat: []
s: multiset
tt: multiset
U12: []
U42: multiset
plus1: [1]
0: multiset


The following usable rules [FROCOS05] were oriented:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

(34) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.