Termination w.r.t. Q of the given QTRS could not be shown:

0 QTRS
↳1 DependencyPairsProof (⇔)
↳2 QDP
↳3 DependencyGraphProof (⇔)
↳4 AND
  ↳5 QDP
    ↳6 QDPOrderProof (⇔)
    ↳7 QDP
    ↳8 PisEmptyProof (⇔)
    ↳9 TRUE
  ↳10 QDP
    ↳11 QDPOrderProof (⇔)
    ↳12 QDP
    ↳13 PisEmptyProof (⇔)
    ↳14 TRUE
  ↳15 QDP
    ↳16 QDPOrderProof (⇔)
    ↳17 QDP
    ↳18 PisEmptyProof (⇔)
    ↳19 TRUE
  ↳20 QDP
    ↳21 QDPOrderProof (⇔)
    ↳22 QDP
    ↳23 QDPOrderProof (⇔)
    ↳24 QDP
    ↳25 PisEmptyProof (⇔)
    ↳26 TRUE
  ↳27 QDP
    ↳28 QDPOrderProof (⇔)
    ↳29 QDP
    ↳30 QDPOrderProof (⇔)
    ↳31 QDP
    ↳32 PisEmptyProof (⇔)
    ↳33 TRUE
  ↳34 QDP
    ↳35 QDPOrderProof (⇔)
    ↳36 QDP
    ↳37 QDPOrderProof (⇔)
    ↳38 QDP
    ↳39 PisEmptyProof (⇔)
    ↳40 TRUE
  ↳41 QDP
    ↳42 QDPOrderProof (⇔)
    ↳43 QDP
    ↳44 QDPOrderProof (⇔)
    ↳45 QDP
    ↳46 PisEmptyProof (⇔)
    ↳47 TRUE
  ↳48 QDP
    ↳49 QDPOrderProof (⇔)
    ↳50 QDP
    ↳51 QDPOrderProof (⇔)
    ↳52 QDP
    ↳53 PisEmptyProof (⇔)
    ↳54 TRUE
  ↳55 QDP
    ↳56 QDPOrderProof (⇔)
    ↳57 QDP
    ↳58 QDPOrderProof (⇔)
    ↳59 QDP
    ↳60 PisEmptyProof (⇔)
    ↳61 TRUE
  ↳62 QDP
    ↳63 QDPOrderProof (⇔)
    ↳64 QDP
    ↳65 QDPOrderProof (⇔)
    ↳66 QDP
    ↳67 PisEmptyProof (⇔)
    ↳68 TRUE
  ↳69 QDP
    ↳70 QDPOrderProof (⇔)
    ↳71 QDP
    ↳72 QDPOrderProof (⇔)
    ↳73 QDP
    ↳74 PisEmptyProof (⇔)
    ↳75 TRUE
  ↳76 QDP
    ↳77 QDPOrderProof (⇔)
    ↳78 QDP
    ↳79 QDPOrderProof (⇔)
    ↳80 QDP
    ↳81 PisEmptyProof (⇔)
    ↳82 TRUE
  ↳83 QDP
    ↳84 QDPOrderProof (⇔)
    ↳85 QDP
    ↳86 QDPOrderProof (⇔)
    ↳87 QDP
    ↳88 PisEmptyProof (⇔)
    ↳89 TRUE
  ↳90 QDP
    ↳91 QDPOrderProof (⇔)
    ↳92 QDP
    ↳93 QDPOrderProof (⇔)
    ↳94 QDP
    ↳95 PisEmptyProof (⇔)
    ↳96 TRUE
  ↳97 QDP
    ↳98 QDPOrderProof (⇔)
    ↳99 QDP
    ↳100 QDPOrderProof (⇔)
    ↳101 QDP
    ↳102 PisEmptyProof (⇔)
    ↳103 TRUE
  ↳104 QDP
    ↳105 QDPOrderProof (⇔)
    ↳106 QDP
    ↳107 QDPOrderProof (⇔)
    ↳108 QDP
    ↳109 QDPOrderProof (⇔)
    ↳110 QDP
    ↳111 QDPOrderProof (⇔)
    ↳112 QDP
    ↳113 QDPOrderProof (⇔)
    ↳114 QDP
    ↳115 QDPOrderProof (⇔)
    ↳116 QDP
    ↳117 QDPOrderProof (⇔)
    ↳118 QDP
    ↳119 QDPOrderProof (⇔)
    ↳120 QDP
    ↳121 QDPOrderProof (⇔)
    ↳122 QDP
    ↳123 PisEmptyProof (⇔)
    ↳124 TRUE
  ↳125 QDP
    ↳126 QDPOrderProof (⇔)
    ↳127 QDP
    ↳128 QDPOrderProof (⇔)
    ↳129 QDP
    ↳130 QDPOrderProof (⇔)
    ↳131 QDP
    ↳132 QDPOrderProof (⇔)
    ↳133 QDP
    ↳134 QDPOrderProof (⇔)
    ↳135 QDP
    ↳136 QDPOrderProof (⇔)
    ↳137 QDP
    ↳138 QDPOrderProof (⇔)
    ↳139 QDP
    ↳140 QDPOrderProof (⇔)
    ↳141 QDP
    ↳142 QDPOrderProof (⇔)
    ↳143 QDP
    ↳144 PisEmptyProof (⇔)
    ↳145 TRUE
  ↳146 QDP

(0) Obligation:

Q restricted rewrite system:
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.

(1) DependencyPairsProof (EQUIVALENT transformation)

Using Dependency Pairs [AG00,LPAR04] we result in the following initial DP problem.

(2) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(zeros) → CONS(0, zeros)
ACTIVE(U41(tt, V2)) → U421(isNatIList(V2))
ACTIVE(U41(tt, V2)) → ISNATILIST(V2)
ACTIVE(U51(tt, V2)) → U521(isNatList(V2))
ACTIVE(U51(tt, V2)) → ISNATLIST(V2)
ACTIVE(U61(tt, L, N)) → U621(isNat(N), L)
ACTIVE(U61(tt, L, N)) → ISNAT(N)
ACTIVE(U62(tt, L)) → S(length(L))
ACTIVE(U62(tt, L)) → LENGTH(L)
ACTIVE(isNat(length(V1))) → U111(isNatList(V1))
ACTIVE(isNat(length(V1))) → ISNATLIST(V1)
ACTIVE(isNat(s(V1))) → U211(isNat(V1))
ACTIVE(isNat(s(V1))) → ISNAT(V1)
ACTIVE(isNatIList(V)) → U311(isNatList(V))
ACTIVE(isNatIList(V)) → ISNATLIST(V)
ACTIVE(isNatIList(cons(V1, V2))) → U411(isNat(V1), V2)
ACTIVE(isNatIList(cons(V1, V2))) → ISNAT(V1)
ACTIVE(isNatList(cons(V1, V2))) → U511(isNat(V1), V2)
ACTIVE(isNatList(cons(V1, V2))) → ISNAT(V1)
ACTIVE(length(cons(N, L))) → U611(isNatList(L), L, N)
ACTIVE(length(cons(N, L))) → ISNATLIST(L)
ACTIVE(cons(X1, X2)) → CONS(active(X1), X2)
ACTIVE(cons(X1, X2)) → ACTIVE(X1)
ACTIVE(U11(X)) → U111(active(X))
ACTIVE(U11(X)) → ACTIVE(X)
ACTIVE(U21(X)) → U211(active(X))
ACTIVE(U21(X)) → ACTIVE(X)
ACTIVE(U31(X)) → U311(active(X))
ACTIVE(U31(X)) → ACTIVE(X)
ACTIVE(U41(X1, X2)) → U411(active(X1), X2)
ACTIVE(U41(X1, X2)) → ACTIVE(X1)
ACTIVE(U42(X)) → U421(active(X))
ACTIVE(U42(X)) → ACTIVE(X)
ACTIVE(U51(X1, X2)) → U511(active(X1), X2)
ACTIVE(U51(X1, X2)) → ACTIVE(X1)
ACTIVE(U52(X)) → U521(active(X))
ACTIVE(U52(X)) → ACTIVE(X)
ACTIVE(U61(X1, X2, X3)) → U611(active(X1), X2, X3)
ACTIVE(U61(X1, X2, X3)) → ACTIVE(X1)
ACTIVE(U62(X1, X2)) → U621(active(X1), X2)
ACTIVE(U62(X1, X2)) → ACTIVE(X1)
ACTIVE(s(X)) → S(active(X))
ACTIVE(s(X)) → ACTIVE(X)
ACTIVE(length(X)) → LENGTH(active(X))
ACTIVE(length(X)) → ACTIVE(X)
CONS(mark(X1), X2) → CONS(X1, X2)
U111(mark(X)) → U111(X)
U211(mark(X)) → U211(X)
U311(mark(X)) → U311(X)
U411(mark(X1), X2) → U411(X1, X2)
U421(mark(X)) → U421(X)
U511(mark(X1), X2) → U511(X1, X2)
U521(mark(X)) → U521(X)
U611(mark(X1), X2, X3) → U611(X1, X2, X3)
U621(mark(X1), X2) → U621(X1, X2)
S(mark(X)) → S(X)
LENGTH(mark(X)) → LENGTH(X)
PROPER(cons(X1, X2)) → CONS(proper(X1), proper(X2))
PROPER(cons(X1, X2)) → PROPER(X1)
PROPER(cons(X1, X2)) → PROPER(X2)
PROPER(U11(X)) → U111(proper(X))
PROPER(U11(X)) → PROPER(X)
PROPER(U21(X)) → U211(proper(X))
PROPER(U21(X)) → PROPER(X)
PROPER(U31(X)) → U311(proper(X))
PROPER(U31(X)) → PROPER(X)
PROPER(U41(X1, X2)) → U411(proper(X1), proper(X2))
PROPER(U41(X1, X2)) → PROPER(X1)
PROPER(U41(X1, X2)) → PROPER(X2)
PROPER(U42(X)) → U421(proper(X))
PROPER(U42(X)) → PROPER(X)
PROPER(isNatIList(X)) → ISNATILIST(proper(X))
PROPER(isNatIList(X)) → PROPER(X)
PROPER(U51(X1, X2)) → U511(proper(X1), proper(X2))
PROPER(U51(X1, X2)) → PROPER(X1)
PROPER(U51(X1, X2)) → PROPER(X2)
PROPER(U52(X)) → U521(proper(X))
PROPER(U52(X)) → PROPER(X)
PROPER(isNatList(X)) → ISNATLIST(proper(X))
PROPER(isNatList(X)) → PROPER(X)
PROPER(U61(X1, X2, X3)) → U611(proper(X1), proper(X2), proper(X3))
PROPER(U61(X1, X2, X3)) → PROPER(X1)
PROPER(U61(X1, X2, X3)) → PROPER(X2)
PROPER(U61(X1, X2, X3)) → PROPER(X3)
PROPER(U62(X1, X2)) → U621(proper(X1), proper(X2))
PROPER(U62(X1, X2)) → PROPER(X1)
PROPER(U62(X1, X2)) → PROPER(X2)
PROPER(isNat(X)) → ISNAT(proper(X))
PROPER(isNat(X)) → PROPER(X)
PROPER(s(X)) → S(proper(X))
PROPER(s(X)) → PROPER(X)
PROPER(length(X)) → LENGTH(proper(X))
PROPER(length(X)) → PROPER(X)
CONS(ok(X1), ok(X2)) → CONS(X1, X2)
U111(ok(X)) → U111(X)
U211(ok(X)) → U211(X)
U311(ok(X)) → U311(X)
U411(ok(X1), ok(X2)) → U411(X1, X2)
U421(ok(X)) → U421(X)
ISNATILIST(ok(X)) → ISNATILIST(X)
U511(ok(X1), ok(X2)) → U511(X1, X2)
U521(ok(X)) → U521(X)
ISNATLIST(ok(X)) → ISNATLIST(X)
U611(ok(X1), ok(X2), ok(X3)) → U611(X1, X2, X3)
U621(ok(X1), ok(X2)) → U621(X1, X2)
ISNAT(ok(X)) → ISNAT(X)
S(ok(X)) → S(X)
LENGTH(ok(X)) → LENGTH(X)
TOP(mark(X)) → TOP(proper(X))
TOP(mark(X)) → PROPER(X)
TOP(ok(X)) → TOP(active(X))
TOP(ok(X)) → ACTIVE(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(3) DependencyGraphProof (EQUIVALENT transformation)

The approximation of the Dependency Graph [LPAR04,FROCOS05,EDGSTAR] contains 18 SCCs with 50 less nodes.

(4) Complex Obligation (AND)

(5) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ISNAT(ok(X)) → ISNAT(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(6) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ISNAT(ok(X)) → ISNAT(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
ok1 > ISNAT1

Status:
ok1: multiset
ISNAT1: multiset


The following usable rules [FROCOS05] were oriented: none

(7) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(8) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(9) TRUE

(10) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ISNATLIST(ok(X)) → ISNATLIST(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(11) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ISNATLIST(ok(X)) → ISNATLIST(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
ok1 > ISNATLIST1

Status:
ISNATLIST1: multiset
ok1: multiset


The following usable rules [FROCOS05] were oriented: none

(12) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(13) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(14) TRUE

(15) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ISNATILIST(ok(X)) → ISNATILIST(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(16) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ISNATILIST(ok(X)) → ISNATILIST(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
ok1 > ISNATILIST1

Status:
ISNATILIST1: multiset
ok1: multiset


The following usable rules [FROCOS05] were oriented: none

(17) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(18) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(19) TRUE

(20) Obligation:

Q DP problem:
The TRS P consists of the following rules:

LENGTH(ok(X)) → LENGTH(X)
LENGTH(mark(X)) → LENGTH(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(21) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


LENGTH(ok(X)) → LENGTH(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
LENGTH(x1)  =  LENGTH(x1)
ok(x1)  =  ok(x1)
mark(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[LENGTH1, ok1]

Status:
LENGTH1: multiset
ok1: multiset


The following usable rules [FROCOS05] were oriented: none

(22) Obligation:

Q DP problem:
The TRS P consists of the following rules:

LENGTH(mark(X)) → LENGTH(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(23) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


LENGTH(mark(X)) → LENGTH(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
mark1 > LENGTH1

Status:
LENGTH1: multiset
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(24) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(25) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(26) TRUE

(27) Obligation:

Q DP problem:
The TRS P consists of the following rules:

S(ok(X)) → S(X)
S(mark(X)) → S(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(28) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


S(ok(X)) → S(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
S(x1)  =  S(x1)
ok(x1)  =  ok(x1)
mark(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[S1, ok1]

Status:
ok1: multiset
S1: multiset


The following usable rules [FROCOS05] were oriented: none

(29) Obligation:

Q DP problem:
The TRS P consists of the following rules:

S(mark(X)) → S(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(30) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


S(mark(X)) → S(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
mark1 > S1

Status:
mark1: multiset
S1: multiset


The following usable rules [FROCOS05] were oriented: none

(31) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(32) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(33) TRUE

(34) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U621(ok(X1), ok(X2)) → U621(X1, X2)
U621(mark(X1), X2) → U621(X1, X2)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(35) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U621(ok(X1), ok(X2)) → U621(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U621(x1, x2)  =  U621(x2)
ok(x1)  =  ok(x1)
mark(x1)  =  mark

Recursive path order with status [RPO].
Quasi-Precedence:
ok1 > U62^11
mark > U62^11

Status:
mark: multiset
ok1: multiset
U62^11: multiset


The following usable rules [FROCOS05] were oriented: none

(36) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U621(mark(X1), X2) → U621(X1, X2)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(37) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U621(mark(X1), X2) → U621(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U621(x1, x2)  =  U621(x1)
mark(x1)  =  mark(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
[U62^11, mark1]

Status:
mark1: [1]
U62^11: multiset


The following usable rules [FROCOS05] were oriented: none

(38) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(39) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(40) TRUE

(41) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U611(ok(X1), ok(X2), ok(X3)) → U611(X1, X2, X3)
U611(mark(X1), X2, X3) → U611(X1, X2, X3)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(42) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U611(ok(X1), ok(X2), ok(X3)) → U611(X1, X2, X3)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U611(x1, x2, x3)  =  U611(x2, x3)
ok(x1)  =  ok(x1)
mark(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[U61^12, ok1]

Status:
U61^12: multiset
ok1: multiset


The following usable rules [FROCOS05] were oriented: none

(43) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U611(mark(X1), X2, X3) → U611(X1, X2, X3)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(44) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U611(mark(X1), X2, X3) → U611(X1, X2, X3)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U611(x1, x2, x3)  =  U611(x1)
mark(x1)  =  mark(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
[U61^11, mark1]

Status:
U61^11: multiset
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(45) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(46) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(47) TRUE

(48) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U521(ok(X)) → U521(X)
U521(mark(X)) → U521(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(49) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U521(ok(X)) → U521(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U521(x1)  =  U521(x1)
ok(x1)  =  ok(x1)
mark(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[U52^11, ok1]

Status:
U52^11: multiset
ok1: multiset


The following usable rules [FROCOS05] were oriented: none

(50) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U521(mark(X)) → U521(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(51) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U521(mark(X)) → U521(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
mark1 > U52^11

Status:
U52^11: multiset
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(52) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(53) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(54) TRUE

(55) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U511(ok(X1), ok(X2)) → U511(X1, X2)
U511(mark(X1), X2) → U511(X1, X2)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(56) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U511(ok(X1), ok(X2)) → U511(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U511(x1, x2)  =  U511(x2)
ok(x1)  =  ok(x1)
mark(x1)  =  mark

Recursive path order with status [RPO].
Quasi-Precedence:
ok1 > U51^11
mark > U51^11

Status:
mark: multiset
ok1: multiset
U51^11: multiset


The following usable rules [FROCOS05] were oriented: none

(57) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U511(mark(X1), X2) → U511(X1, X2)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(58) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U511(mark(X1), X2) → U511(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U511(x1, x2)  =  U511(x1)
mark(x1)  =  mark(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
[U51^11, mark1]

Status:
mark1: [1]
U51^11: multiset


The following usable rules [FROCOS05] were oriented: none

(59) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(60) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(61) TRUE

(62) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U421(ok(X)) → U421(X)
U421(mark(X)) → U421(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(63) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U421(ok(X)) → U421(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U421(x1)  =  U421(x1)
ok(x1)  =  ok(x1)
mark(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[U42^11, ok1]

Status:
ok1: multiset
U42^11: multiset


The following usable rules [FROCOS05] were oriented: none

(64) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U421(mark(X)) → U421(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(65) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U421(mark(X)) → U421(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
mark1 > U42^11

Status:
mark1: multiset
U42^11: multiset


The following usable rules [FROCOS05] were oriented: none

(66) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(67) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(68) TRUE

(69) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U411(ok(X1), ok(X2)) → U411(X1, X2)
U411(mark(X1), X2) → U411(X1, X2)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(70) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U411(ok(X1), ok(X2)) → U411(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U411(x1, x2)  =  U411(x2)
ok(x1)  =  ok(x1)
mark(x1)  =  mark

Recursive path order with status [RPO].
Quasi-Precedence:
ok1 > U41^11
mark > U41^11

Status:
U41^11: multiset
mark: multiset
ok1: multiset


The following usable rules [FROCOS05] were oriented: none

(71) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U411(mark(X1), X2) → U411(X1, X2)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(72) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U411(mark(X1), X2) → U411(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U411(x1, x2)  =  U411(x1)
mark(x1)  =  mark(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
[U41^11, mark1]

Status:
U41^11: multiset
mark1: [1]


The following usable rules [FROCOS05] were oriented: none

(73) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(74) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(75) TRUE

(76) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U311(ok(X)) → U311(X)
U311(mark(X)) → U311(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(77) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U311(ok(X)) → U311(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U311(x1)  =  U311(x1)
ok(x1)  =  ok(x1)
mark(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[U31^11, ok1]

Status:
U31^11: multiset
ok1: multiset


The following usable rules [FROCOS05] were oriented: none

(78) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U311(mark(X)) → U311(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(79) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U311(mark(X)) → U311(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
mark1 > U31^11

Status:
U31^11: multiset
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(80) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(81) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(82) TRUE

(83) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U211(ok(X)) → U211(X)
U211(mark(X)) → U211(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(84) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U211(ok(X)) → U211(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U211(x1)  =  U211(x1)
ok(x1)  =  ok(x1)
mark(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[U21^11, ok1]

Status:
ok1: multiset
U21^11: multiset


The following usable rules [FROCOS05] were oriented: none

(85) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U211(mark(X)) → U211(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(86) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U211(mark(X)) → U211(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
mark1 > U21^11

Status:
mark1: multiset
U21^11: multiset


The following usable rules [FROCOS05] were oriented: none

(87) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(88) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(89) TRUE

(90) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U111(ok(X)) → U111(X)
U111(mark(X)) → U111(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(91) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U111(ok(X)) → U111(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
U111(x1)  =  U111(x1)
ok(x1)  =  ok(x1)
mark(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[U11^11, ok1]

Status:
U11^11: multiset
ok1: multiset


The following usable rules [FROCOS05] were oriented: none

(92) Obligation:

Q DP problem:
The TRS P consists of the following rules:

U111(mark(X)) → U111(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(93) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


U111(mark(X)) → U111(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
mark1 > U11^11

Status:
U11^11: multiset
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(94) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(95) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(96) TRUE

(97) Obligation:

Q DP problem:
The TRS P consists of the following rules:

CONS(ok(X1), ok(X2)) → CONS(X1, X2)
CONS(mark(X1), X2) → CONS(X1, X2)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(98) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


CONS(ok(X1), ok(X2)) → CONS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
CONS(x1, x2)  =  CONS(x2)
ok(x1)  =  ok(x1)
mark(x1)  =  mark

Recursive path order with status [RPO].
Quasi-Precedence:
ok1 > CONS1
mark > CONS1

Status:
CONS1: multiset
mark: multiset
ok1: multiset


The following usable rules [FROCOS05] were oriented: none

(99) Obligation:

Q DP problem:
The TRS P consists of the following rules:

CONS(mark(X1), X2) → CONS(X1, X2)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(100) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


CONS(mark(X1), X2) → CONS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
CONS(x1, x2)  =  CONS(x1)
mark(x1)  =  mark(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
[CONS1, mark1]

Status:
CONS1: multiset
mark1: [1]


The following usable rules [FROCOS05] were oriented: none

(101) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(102) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(103) TRUE

(104) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PROPER(cons(X1, X2)) → PROPER(X2)
PROPER(cons(X1, X2)) → PROPER(X1)
PROPER(U11(X)) → PROPER(X)
PROPER(U21(X)) → PROPER(X)
PROPER(U31(X)) → PROPER(X)
PROPER(U41(X1, X2)) → PROPER(X1)
PROPER(U41(X1, X2)) → PROPER(X2)
PROPER(U42(X)) → PROPER(X)
PROPER(isNatIList(X)) → PROPER(X)
PROPER(U51(X1, X2)) → PROPER(X1)
PROPER(U51(X1, X2)) → PROPER(X2)
PROPER(U52(X)) → PROPER(X)
PROPER(isNatList(X)) → PROPER(X)
PROPER(U61(X1, X2, X3)) → PROPER(X1)
PROPER(U61(X1, X2, X3)) → PROPER(X2)
PROPER(U61(X1, X2, X3)) → PROPER(X3)
PROPER(U62(X1, X2)) → PROPER(X1)
PROPER(U62(X1, X2)) → PROPER(X2)
PROPER(isNat(X)) → PROPER(X)
PROPER(s(X)) → PROPER(X)
PROPER(length(X)) → PROPER(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(105) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


PROPER(cons(X1, X2)) → PROPER(X2)
PROPER(cons(X1, X2)) → PROPER(X1)
PROPER(U41(X1, X2)) → PROPER(X1)
PROPER(U41(X1, X2)) → PROPER(X2)
PROPER(U51(X1, X2)) → PROPER(X1)
PROPER(U51(X1, X2)) → PROPER(X2)
PROPER(U61(X1, X2, X3)) → PROPER(X1)
PROPER(U61(X1, X2, X3)) → PROPER(X2)
PROPER(U61(X1, X2, X3)) → PROPER(X3)
PROPER(U62(X1, X2)) → PROPER(X1)
PROPER(U62(X1, X2)) → PROPER(X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
PROPER(x1)  =  PROPER(x1)
cons(x1, x2)  =  cons(x1, x2)
U11(x1)  =  x1
U21(x1)  =  x1
U31(x1)  =  x1
U41(x1, x2)  =  U41(x1, x2)
U42(x1)  =  x1
isNatIList(x1)  =  x1
U51(x1, x2)  =  U51(x1, x2)
U52(x1)  =  x1
isNatList(x1)  =  x1
U61(x1, x2, x3)  =  U61(x1, x2, x3)
U62(x1, x2)  =  U62(x1, x2)
isNat(x1)  =  x1
s(x1)  =  x1
length(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
PROPER1: [1]
cons2: [2,1]
U622: multiset
U412: multiset
U613: multiset
U512: [2,1]


The following usable rules [FROCOS05] were oriented: none

(106) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PROPER(U11(X)) → PROPER(X)
PROPER(U21(X)) → PROPER(X)
PROPER(U31(X)) → PROPER(X)
PROPER(U42(X)) → PROPER(X)
PROPER(isNatIList(X)) → PROPER(X)
PROPER(U52(X)) → PROPER(X)
PROPER(isNatList(X)) → PROPER(X)
PROPER(isNat(X)) → PROPER(X)
PROPER(s(X)) → PROPER(X)
PROPER(length(X)) → PROPER(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(107) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


PROPER(U11(X)) → PROPER(X)
PROPER(length(X)) → PROPER(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
PROPER(x1)  =  x1
U11(x1)  =  U11(x1)
U21(x1)  =  x1
U31(x1)  =  x1
U42(x1)  =  x1
isNatIList(x1)  =  x1
U52(x1)  =  x1
isNatList(x1)  =  x1
isNat(x1)  =  x1
s(x1)  =  x1
length(x1)  =  length(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
U111: multiset
length1: multiset


The following usable rules [FROCOS05] were oriented: none

(108) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PROPER(U21(X)) → PROPER(X)
PROPER(U31(X)) → PROPER(X)
PROPER(U42(X)) → PROPER(X)
PROPER(isNatIList(X)) → PROPER(X)
PROPER(U52(X)) → PROPER(X)
PROPER(isNatList(X)) → PROPER(X)
PROPER(isNat(X)) → PROPER(X)
PROPER(s(X)) → PROPER(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(109) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


PROPER(isNatIList(X)) → PROPER(X)
PROPER(U52(X)) → PROPER(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
PROPER(x1)  =  PROPER(x1)
U21(x1)  =  x1
U31(x1)  =  x1
U42(x1)  =  x1
isNatIList(x1)  =  isNatIList(x1)
U52(x1)  =  U52(x1)
isNatList(x1)  =  x1
isNat(x1)  =  x1
s(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
U521 > [PROPER1, isNatIList1]

Status:
PROPER1: multiset
U521: multiset
isNatIList1: multiset


The following usable rules [FROCOS05] were oriented: none

(110) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PROPER(U21(X)) → PROPER(X)
PROPER(U31(X)) → PROPER(X)
PROPER(U42(X)) → PROPER(X)
PROPER(isNatList(X)) → PROPER(X)
PROPER(isNat(X)) → PROPER(X)
PROPER(s(X)) → PROPER(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(111) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


PROPER(s(X)) → PROPER(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
PROPER(x1)  =  PROPER(x1)
U21(x1)  =  x1
U31(x1)  =  x1
U42(x1)  =  x1
isNatList(x1)  =  x1
isNat(x1)  =  x1
s(x1)  =  s(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
PROPER1: multiset
s1: multiset


The following usable rules [FROCOS05] were oriented: none

(112) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PROPER(U21(X)) → PROPER(X)
PROPER(U31(X)) → PROPER(X)
PROPER(U42(X)) → PROPER(X)
PROPER(isNatList(X)) → PROPER(X)
PROPER(isNat(X)) → PROPER(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(113) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


PROPER(U21(X)) → PROPER(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
PROPER(x1)  =  PROPER(x1)
U21(x1)  =  U21(x1)
U31(x1)  =  x1
U42(x1)  =  x1
isNatList(x1)  =  x1
isNat(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[PROPER1, U211]

Status:
PROPER1: multiset
U211: multiset


The following usable rules [FROCOS05] were oriented: none

(114) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PROPER(U31(X)) → PROPER(X)
PROPER(U42(X)) → PROPER(X)
PROPER(isNatList(X)) → PROPER(X)
PROPER(isNat(X)) → PROPER(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(115) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


PROPER(isNatList(X)) → PROPER(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
PROPER(x1)  =  PROPER(x1)
U31(x1)  =  x1
U42(x1)  =  x1
isNatList(x1)  =  isNatList(x1)
isNat(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[PROPER1, isNatList1]

Status:
PROPER1: multiset
isNatList1: multiset


The following usable rules [FROCOS05] were oriented: none

(116) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PROPER(U31(X)) → PROPER(X)
PROPER(U42(X)) → PROPER(X)
PROPER(isNat(X)) → PROPER(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(117) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


PROPER(U31(X)) → PROPER(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
PROPER(x1)  =  PROPER(x1)
U31(x1)  =  U31(x1)
U42(x1)  =  x1
isNat(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[PROPER1, U311]

Status:
PROPER1: multiset
U311: multiset


The following usable rules [FROCOS05] were oriented: none

(118) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PROPER(U42(X)) → PROPER(X)
PROPER(isNat(X)) → PROPER(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(119) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


PROPER(U42(X)) → PROPER(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
PROPER(x1)  =  PROPER(x1)
U42(x1)  =  U42(x1)
isNat(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[PROPER1, U421]

Status:
PROPER1: multiset
U421: multiset


The following usable rules [FROCOS05] were oriented: none

(120) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PROPER(isNat(X)) → PROPER(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(121) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


PROPER(isNat(X)) → PROPER(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
isNat1 > PROPER1

Status:
PROPER1: multiset
isNat1: multiset


The following usable rules [FROCOS05] were oriented: none

(122) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(123) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(124) TRUE

(125) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(U11(X)) → ACTIVE(X)
ACTIVE(cons(X1, X2)) → ACTIVE(X1)
ACTIVE(U21(X)) → ACTIVE(X)
ACTIVE(U31(X)) → ACTIVE(X)
ACTIVE(U41(X1, X2)) → ACTIVE(X1)
ACTIVE(U42(X)) → ACTIVE(X)
ACTIVE(U51(X1, X2)) → ACTIVE(X1)
ACTIVE(U52(X)) → ACTIVE(X)
ACTIVE(U61(X1, X2, X3)) → ACTIVE(X1)
ACTIVE(U62(X1, X2)) → ACTIVE(X1)
ACTIVE(s(X)) → ACTIVE(X)
ACTIVE(length(X)) → ACTIVE(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(126) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ACTIVE(length(X)) → ACTIVE(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
ACTIVE(x1)  =  ACTIVE(x1)
U11(x1)  =  x1
cons(x1, x2)  =  x1
U21(x1)  =  x1
U31(x1)  =  x1
U41(x1, x2)  =  x1
U42(x1)  =  x1
U51(x1, x2)  =  x1
U52(x1)  =  x1
U61(x1, x2, x3)  =  x1
U62(x1, x2)  =  x1
s(x1)  =  x1
length(x1)  =  length(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
length1: multiset
ACTIVE1: multiset


The following usable rules [FROCOS05] were oriented: none

(127) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(U11(X)) → ACTIVE(X)
ACTIVE(cons(X1, X2)) → ACTIVE(X1)
ACTIVE(U21(X)) → ACTIVE(X)
ACTIVE(U31(X)) → ACTIVE(X)
ACTIVE(U41(X1, X2)) → ACTIVE(X1)
ACTIVE(U42(X)) → ACTIVE(X)
ACTIVE(U51(X1, X2)) → ACTIVE(X1)
ACTIVE(U52(X)) → ACTIVE(X)
ACTIVE(U61(X1, X2, X3)) → ACTIVE(X1)
ACTIVE(U62(X1, X2)) → ACTIVE(X1)
ACTIVE(s(X)) → ACTIVE(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(128) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ACTIVE(U41(X1, X2)) → ACTIVE(X1)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
ACTIVE(x1)  =  ACTIVE(x1)
U11(x1)  =  x1
cons(x1, x2)  =  x1
U21(x1)  =  x1
U31(x1)  =  x1
U41(x1, x2)  =  U41(x1, x2)
U42(x1)  =  x1
U51(x1, x2)  =  x1
U52(x1)  =  x1
U61(x1, x2, x3)  =  x1
U62(x1, x2)  =  x1
s(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[ACTIVE1, U412]

Status:
U412: multiset
ACTIVE1: multiset


The following usable rules [FROCOS05] were oriented: none

(129) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(U11(X)) → ACTIVE(X)
ACTIVE(cons(X1, X2)) → ACTIVE(X1)
ACTIVE(U21(X)) → ACTIVE(X)
ACTIVE(U31(X)) → ACTIVE(X)
ACTIVE(U42(X)) → ACTIVE(X)
ACTIVE(U51(X1, X2)) → ACTIVE(X1)
ACTIVE(U52(X)) → ACTIVE(X)
ACTIVE(U61(X1, X2, X3)) → ACTIVE(X1)
ACTIVE(U62(X1, X2)) → ACTIVE(X1)
ACTIVE(s(X)) → ACTIVE(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(130) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ACTIVE(cons(X1, X2)) → ACTIVE(X1)
ACTIVE(U51(X1, X2)) → ACTIVE(X1)
ACTIVE(U61(X1, X2, X3)) → ACTIVE(X1)
ACTIVE(U62(X1, X2)) → ACTIVE(X1)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
ACTIVE(x1)  =  ACTIVE(x1)
U11(x1)  =  x1
cons(x1, x2)  =  cons(x1, x2)
U21(x1)  =  x1
U31(x1)  =  x1
U42(x1)  =  x1
U51(x1, x2)  =  U51(x1, x2)
U52(x1)  =  x1
U61(x1, x2, x3)  =  U61(x1, x2, x3)
U62(x1, x2)  =  U62(x1, x2)
s(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
cons2 > ACTIVE1
U512 > ACTIVE1
U613 > ACTIVE1

Status:
cons2: multiset
U622: multiset
U613: multiset
ACTIVE1: multiset
U512: multiset


The following usable rules [FROCOS05] were oriented: none

(131) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(U11(X)) → ACTIVE(X)
ACTIVE(U21(X)) → ACTIVE(X)
ACTIVE(U31(X)) → ACTIVE(X)
ACTIVE(U42(X)) → ACTIVE(X)
ACTIVE(U52(X)) → ACTIVE(X)
ACTIVE(s(X)) → ACTIVE(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(132) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ACTIVE(s(X)) → ACTIVE(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
ACTIVE(x1)  =  ACTIVE(x1)
U11(x1)  =  x1
U21(x1)  =  x1
U31(x1)  =  x1
U42(x1)  =  x1
U52(x1)  =  x1
s(x1)  =  s(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
s1: multiset
ACTIVE1: multiset


The following usable rules [FROCOS05] were oriented: none

(133) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(U11(X)) → ACTIVE(X)
ACTIVE(U21(X)) → ACTIVE(X)
ACTIVE(U31(X)) → ACTIVE(X)
ACTIVE(U42(X)) → ACTIVE(X)
ACTIVE(U52(X)) → ACTIVE(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(134) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ACTIVE(U11(X)) → ACTIVE(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
ACTIVE(x1)  =  ACTIVE(x1)
U11(x1)  =  U11(x1)
U21(x1)  =  x1
U31(x1)  =  x1
U42(x1)  =  x1
U52(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[ACTIVE1, U111]

Status:
U111: multiset
ACTIVE1: multiset


The following usable rules [FROCOS05] were oriented: none

(135) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(U21(X)) → ACTIVE(X)
ACTIVE(U31(X)) → ACTIVE(X)
ACTIVE(U42(X)) → ACTIVE(X)
ACTIVE(U52(X)) → ACTIVE(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(136) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ACTIVE(U42(X)) → ACTIVE(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
ACTIVE(x1)  =  ACTIVE(x1)
U21(x1)  =  x1
U31(x1)  =  x1
U42(x1)  =  U42(x1)
U52(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[ACTIVE1, U421]

Status:
U421: multiset
ACTIVE1: multiset


The following usable rules [FROCOS05] were oriented: none

(137) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(U21(X)) → ACTIVE(X)
ACTIVE(U31(X)) → ACTIVE(X)
ACTIVE(U52(X)) → ACTIVE(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(138) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ACTIVE(U21(X)) → ACTIVE(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
ACTIVE(x1)  =  ACTIVE(x1)
U21(x1)  =  U21(x1)
U31(x1)  =  x1
U52(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[ACTIVE1, U211]

Status:
ACTIVE1: multiset
U211: multiset


The following usable rules [FROCOS05] were oriented: none

(139) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(U31(X)) → ACTIVE(X)
ACTIVE(U52(X)) → ACTIVE(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(140) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ACTIVE(U31(X)) → ACTIVE(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
ACTIVE(x1)  =  ACTIVE(x1)
U31(x1)  =  U31(x1)
U52(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[ACTIVE1, U311]

Status:
U311: multiset
ACTIVE1: multiset


The following usable rules [FROCOS05] were oriented: none

(141) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(U52(X)) → ACTIVE(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(142) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ACTIVE(U52(X)) → ACTIVE(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
U521 > ACTIVE1

Status:
U521: multiset
ACTIVE1: multiset


The following usable rules [FROCOS05] were oriented: none

(143) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(144) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(145) TRUE

(146) Obligation:

Q DP problem:
The TRS P consists of the following rules:

TOP(ok(X)) → TOP(active(X))
TOP(mark(X)) → TOP(proper(X))

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt)) → mark(tt)
active(U41(tt, V2)) → mark(U42(isNatIList(V2)))
active(U42(tt)) → mark(tt)
active(U51(tt, V2)) → mark(U52(isNatList(V2)))
active(U52(tt)) → mark(tt)
active(U61(tt, L, N)) → mark(U62(isNat(N), L))
active(U62(tt, L)) → mark(s(length(L)))
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(U11(isNatList(V1)))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(isNatIList(V)) → mark(U31(isNatList(V)))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(U41(isNat(V1), V2))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(U51(isNat(V1), V2))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U61(isNatList(L), L, N))
active(cons(X1, X2)) → cons(active(X1), X2)
active(U11(X)) → U11(active(X))
active(U21(X)) → U21(active(X))
active(U31(X)) → U31(active(X))
active(U41(X1, X2)) → U41(active(X1), X2)
active(U42(X)) → U42(active(X))
active(U51(X1, X2)) → U51(active(X1), X2)
active(U52(X)) → U52(active(X))
active(U61(X1, X2, X3)) → U61(active(X1), X2, X3)
active(U62(X1, X2)) → U62(active(X1), X2)
active(s(X)) → s(active(X))
active(length(X)) → length(active(X))
cons(mark(X1), X2) → mark(cons(X1, X2))
U11(mark(X)) → mark(U11(X))
U21(mark(X)) → mark(U21(X))
U31(mark(X)) → mark(U31(X))
U41(mark(X1), X2) → mark(U41(X1, X2))
U42(mark(X)) → mark(U42(X))
U51(mark(X1), X2) → mark(U51(X1, X2))
U52(mark(X)) → mark(U52(X))
U61(mark(X1), X2, X3) → mark(U61(X1, X2, X3))
U62(mark(X1), X2) → mark(U62(X1, X2))
s(mark(X)) → mark(s(X))
length(mark(X)) → mark(length(X))
proper(zeros) → ok(zeros)
proper(cons(X1, X2)) → cons(proper(X1), proper(X2))
proper(0) → ok(0)
proper(U11(X)) → U11(proper(X))
proper(tt) → ok(tt)
proper(U21(X)) → U21(proper(X))
proper(U31(X)) → U31(proper(X))
proper(U41(X1, X2)) → U41(proper(X1), proper(X2))
proper(U42(X)) → U42(proper(X))
proper(isNatIList(X)) → isNatIList(proper(X))
proper(U51(X1, X2)) → U51(proper(X1), proper(X2))
proper(U52(X)) → U52(proper(X))
proper(isNatList(X)) → isNatList(proper(X))
proper(U61(X1, X2, X3)) → U61(proper(X1), proper(X2), proper(X3))
proper(U62(X1, X2)) → U62(proper(X1), proper(X2))
proper(isNat(X)) → isNat(proper(X))
proper(s(X)) → s(proper(X))
proper(length(X)) → length(proper(X))
proper(nil) → ok(nil)
cons(ok(X1), ok(X2)) → ok(cons(X1, X2))
U11(ok(X)) → ok(U11(X))
U21(ok(X)) → ok(U21(X))
U31(ok(X)) → ok(U31(X))
U41(ok(X1), ok(X2)) → ok(U41(X1, X2))
U42(ok(X)) → ok(U42(X))
isNatIList(ok(X)) → ok(isNatIList(X))
U51(ok(X1), ok(X2)) → ok(U51(X1, X2))
U52(ok(X)) → ok(U52(X))
isNatList(ok(X)) → ok(isNatList(X))
U61(ok(X1), ok(X2), ok(X3)) → ok(U61(X1, X2, X3))
U62(ok(X1), ok(X2)) → ok(U62(X1, X2))
isNat(ok(X)) → ok(isNat(X))
s(ok(X)) → ok(s(X))
length(ok(X)) → ok(length(X))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.