Termination w.r.t. Q of the given QTRS could not be shown:

0 QTRS
↳1 DependencyPairsProof (⇔)
↳2 QDP
↳3 DependencyGraphProof (⇔)
↳4 AND
  ↳5 QDP
    ↳6 QDPOrderProof (⇔)
    ↳7 QDP
    ↳8 QDPOrderProof (⇔)
    ↳9 QDP
    ↳10 PisEmptyProof (⇔)
    ↳11 TRUE
  ↳12 QDP
    ↳13 QDPOrderProof (⇔)
    ↳14 QDP
    ↳15 QDPOrderProof (⇔)
    ↳16 QDP
    ↳17 PisEmptyProof (⇔)
    ↳18 TRUE
  ↳19 QDP
    ↳20 QDPOrderProof (⇔)
    ↳21 QDP
    ↳22 QDPOrderProof (⇔)
    ↳23 QDP
    ↳24 PisEmptyProof (⇔)
    ↳25 TRUE
  ↳26 QDP
    ↳27 QDPOrderProof (⇔)
    ↳28 QDP
    ↳29 QDPOrderProof (⇔)
    ↳30 QDP
    ↳31 PisEmptyProof (⇔)
    ↳32 TRUE
  ↳33 QDP
    ↳34 QDPOrderProof (⇔)
    ↳35 QDP
    ↳36 QDPOrderProof (⇔)
    ↳37 QDP
    ↳38 QDPOrderProof (⇔)
    ↳39 QDP
    ↳40 QDPOrderProof (⇔)
    ↳41 QDP
    ↳42 PisEmptyProof (⇔)
    ↳43 TRUE
  ↳44 QDP
    ↳45 QDPOrderProof (⇔)
    ↳46 QDP
    ↳47 QDPOrderProof (⇔)
    ↳48 QDP
    ↳49 PisEmptyProof (⇔)
    ↳50 TRUE
  ↳51 QDP

(0) Obligation:

Q restricted rewrite system:
The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.

(1) DependencyPairsProof (EQUIVALENT transformation)

Using Dependency Pairs [AG00,LPAR04] we result in the following initial DP problem.

(2) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(nats) → MARK(adx(zeros))
ACTIVE(nats) → ADX(zeros)
ACTIVE(zeros) → MARK(cons(0, zeros))
ACTIVE(zeros) → CONS(0, zeros)
ACTIVE(incr(cons(X, Y))) → MARK(cons(s(X), incr(Y)))
ACTIVE(incr(cons(X, Y))) → CONS(s(X), incr(Y))
ACTIVE(incr(cons(X, Y))) → S(X)
ACTIVE(incr(cons(X, Y))) → INCR(Y)
ACTIVE(adx(cons(X, Y))) → MARK(incr(cons(X, adx(Y))))
ACTIVE(adx(cons(X, Y))) → INCR(cons(X, adx(Y)))
ACTIVE(adx(cons(X, Y))) → CONS(X, adx(Y))
ACTIVE(adx(cons(X, Y))) → ADX(Y)
ACTIVE(hd(cons(X, Y))) → MARK(X)
ACTIVE(tl(cons(X, Y))) → MARK(Y)
MARK(nats) → ACTIVE(nats)
MARK(adx(X)) → ACTIVE(adx(mark(X)))
MARK(adx(X)) → ADX(mark(X))
MARK(adx(X)) → MARK(X)
MARK(zeros) → ACTIVE(zeros)
MARK(cons(X1, X2)) → ACTIVE(cons(X1, X2))
MARK(0) → ACTIVE(0)
MARK(incr(X)) → ACTIVE(incr(mark(X)))
MARK(incr(X)) → INCR(mark(X))
MARK(incr(X)) → MARK(X)
MARK(s(X)) → ACTIVE(s(X))
MARK(hd(X)) → ACTIVE(hd(mark(X)))
MARK(hd(X)) → HD(mark(X))
MARK(hd(X)) → MARK(X)
MARK(tl(X)) → ACTIVE(tl(mark(X)))
MARK(tl(X)) → TL(mark(X))
MARK(tl(X)) → MARK(X)
ADX(mark(X)) → ADX(X)
ADX(active(X)) → ADX(X)
CONS(mark(X1), X2) → CONS(X1, X2)
CONS(X1, mark(X2)) → CONS(X1, X2)
CONS(active(X1), X2) → CONS(X1, X2)
CONS(X1, active(X2)) → CONS(X1, X2)
INCR(mark(X)) → INCR(X)
INCR(active(X)) → INCR(X)
S(mark(X)) → S(X)
S(active(X)) → S(X)
HD(mark(X)) → HD(X)
HD(active(X)) → HD(X)
TL(mark(X)) → TL(X)
TL(active(X)) → TL(X)

The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(3) DependencyGraphProof (EQUIVALENT transformation)

The approximation of the Dependency Graph [LPAR04,FROCOS05,EDGSTAR] contains 7 SCCs with 13 less nodes.

(4) Complex Obligation (AND)

(5) Obligation:

Q DP problem:
The TRS P consists of the following rules:

TL(active(X)) → TL(X)
TL(mark(X)) → TL(X)

The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(6) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


TL(mark(X)) → TL(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
TL(x1)  =  TL(x1)
active(x1)  =  x1
mark(x1)  =  mark(x1)

Lexicographic path order with status [LPO].
Precedence:
mark1 > TL1

Status:
mark1: [1]
TL1: [1]

The following usable rules [FROCOS05] were oriented: none

(7) Obligation:

Q DP problem:
The TRS P consists of the following rules:

TL(active(X)) → TL(X)

The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(8) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


TL(active(X)) → TL(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
TL(x1)  =  x1
active(x1)  =  active(x1)

Lexicographic path order with status [LPO].
Precedence:
trivial

Status:
active1: [1]

The following usable rules [FROCOS05] were oriented: none

(9) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(10) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(11) TRUE

(12) Obligation:

Q DP problem:
The TRS P consists of the following rules:

HD(active(X)) → HD(X)
HD(mark(X)) → HD(X)

The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(13) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


HD(mark(X)) → HD(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
HD(x1)  =  HD(x1)
active(x1)  =  x1
mark(x1)  =  mark(x1)

Lexicographic path order with status [LPO].
Precedence:
mark1 > HD1

Status:
mark1: [1]
HD1: [1]

The following usable rules [FROCOS05] were oriented: none

(14) Obligation:

Q DP problem:
The TRS P consists of the following rules:

HD(active(X)) → HD(X)

The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(15) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


HD(active(X)) → HD(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
HD(x1)  =  x1
active(x1)  =  active(x1)

Lexicographic path order with status [LPO].
Precedence:
trivial

Status:
active1: [1]

The following usable rules [FROCOS05] were oriented: none

(16) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(17) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(18) TRUE

(19) Obligation:

Q DP problem:
The TRS P consists of the following rules:

S(active(X)) → S(X)
S(mark(X)) → S(X)

The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(20) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


S(mark(X)) → S(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
S(x1)  =  S(x1)
active(x1)  =  x1
mark(x1)  =  mark(x1)

Lexicographic path order with status [LPO].
Precedence:
mark1 > S1

Status:
mark1: [1]
S1: [1]

The following usable rules [FROCOS05] were oriented: none

(21) Obligation:

Q DP problem:
The TRS P consists of the following rules:

S(active(X)) → S(X)

The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(22) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


S(active(X)) → S(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
S(x1)  =  x1
active(x1)  =  active(x1)

Lexicographic path order with status [LPO].
Precedence:
trivial

Status:
active1: [1]

The following usable rules [FROCOS05] were oriented: none

(23) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(24) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(25) TRUE

(26) Obligation:

Q DP problem:
The TRS P consists of the following rules:

INCR(active(X)) → INCR(X)
INCR(mark(X)) → INCR(X)

The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(27) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


INCR(mark(X)) → INCR(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
INCR(x1)  =  INCR(x1)
active(x1)  =  x1
mark(x1)  =  mark(x1)

Lexicographic path order with status [LPO].
Precedence:
mark1 > INCR1

Status:
mark1: [1]
INCR1: [1]

The following usable rules [FROCOS05] were oriented: none

(28) Obligation:

Q DP problem:
The TRS P consists of the following rules:

INCR(active(X)) → INCR(X)

The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(29) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


INCR(active(X)) → INCR(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
INCR(x1)  =  x1
active(x1)  =  active(x1)

Lexicographic path order with status [LPO].
Precedence:
trivial

Status:
active1: [1]

The following usable rules [FROCOS05] were oriented: none

(30) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(31) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(32) TRUE

(33) Obligation:

Q DP problem:
The TRS P consists of the following rules:

CONS(X1, mark(X2)) → CONS(X1, X2)
CONS(mark(X1), X2) → CONS(X1, X2)
CONS(active(X1), X2) → CONS(X1, X2)
CONS(X1, active(X2)) → CONS(X1, X2)

The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(34) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


CONS(X1, mark(X2)) → CONS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
CONS(x1, x2)  =  x2
mark(x1)  =  mark(x1)
active(x1)  =  x1

Lexicographic path order with status [LPO].
Precedence:
trivial

Status:
mark1: [1]

The following usable rules [FROCOS05] were oriented: none

(35) Obligation:

Q DP problem:
The TRS P consists of the following rules:

CONS(mark(X1), X2) → CONS(X1, X2)
CONS(active(X1), X2) → CONS(X1, X2)
CONS(X1, active(X2)) → CONS(X1, X2)

The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(36) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


CONS(mark(X1), X2) → CONS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
CONS(x1, x2)  =  CONS(x1, x2)
mark(x1)  =  mark(x1)
active(x1)  =  x1

Lexicographic path order with status [LPO].
Precedence:
mark1 > CONS2

Status:
CONS2: [1,2]
mark1: [1]

The following usable rules [FROCOS05] were oriented: none

(37) Obligation:

Q DP problem:
The TRS P consists of the following rules:

CONS(active(X1), X2) → CONS(X1, X2)
CONS(X1, active(X2)) → CONS(X1, X2)

The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(38) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


CONS(X1, active(X2)) → CONS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
CONS(x1, x2)  =  x2
active(x1)  =  active(x1)

Lexicographic path order with status [LPO].
Precedence:
trivial

Status:
active1: [1]

The following usable rules [FROCOS05] were oriented: none

(39) Obligation:

Q DP problem:
The TRS P consists of the following rules:

CONS(active(X1), X2) → CONS(X1, X2)

The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(40) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


CONS(active(X1), X2) → CONS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
CONS(x1, x2)  =  x1
active(x1)  =  active(x1)

Lexicographic path order with status [LPO].
Precedence:
trivial

Status:
active1: [1]

The following usable rules [FROCOS05] were oriented: none

(41) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(42) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(43) TRUE

(44) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ADX(active(X)) → ADX(X)
ADX(mark(X)) → ADX(X)

The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(45) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ADX(mark(X)) → ADX(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
ADX(x1)  =  ADX(x1)
active(x1)  =  x1
mark(x1)  =  mark(x1)

Lexicographic path order with status [LPO].
Precedence:
mark1 > ADX1

Status:
ADX1: [1]
mark1: [1]

The following usable rules [FROCOS05] were oriented: none

(46) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ADX(active(X)) → ADX(X)

The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(47) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


ADX(active(X)) → ADX(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
ADX(x1)  =  x1
active(x1)  =  active(x1)

Lexicographic path order with status [LPO].
Precedence:
trivial

Status:
active1: [1]

The following usable rules [FROCOS05] were oriented: none

(48) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(49) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(50) TRUE

(51) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(adx(X)) → ACTIVE(adx(mark(X)))
ACTIVE(incr(cons(X, Y))) → MARK(cons(s(X), incr(Y)))
MARK(adx(X)) → MARK(X)
MARK(nats) → ACTIVE(nats)
ACTIVE(nats) → MARK(adx(zeros))
MARK(zeros) → ACTIVE(zeros)
ACTIVE(zeros) → MARK(cons(0, zeros))
MARK(cons(X1, X2)) → ACTIVE(cons(X1, X2))
ACTIVE(adx(cons(X, Y))) → MARK(incr(cons(X, adx(Y))))
MARK(incr(X)) → ACTIVE(incr(mark(X)))
ACTIVE(hd(cons(X, Y))) → MARK(X)
MARK(incr(X)) → MARK(X)
MARK(s(X)) → ACTIVE(s(X))
ACTIVE(tl(cons(X, Y))) → MARK(Y)
MARK(hd(X)) → ACTIVE(hd(mark(X)))
MARK(hd(X)) → MARK(X)
MARK(tl(X)) → ACTIVE(tl(mark(X)))
MARK(tl(X)) → MARK(X)

The TRS R consists of the following rules:

active(nats) → mark(adx(zeros))
active(zeros) → mark(cons(0, zeros))
active(incr(cons(X, Y))) → mark(cons(s(X), incr(Y)))
active(adx(cons(X, Y))) → mark(incr(cons(X, adx(Y))))
active(hd(cons(X, Y))) → mark(X)
active(tl(cons(X, Y))) → mark(Y)
mark(nats) → active(nats)
mark(adx(X)) → active(adx(mark(X)))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(X1, X2))
mark(0) → active(0)
mark(incr(X)) → active(incr(mark(X)))
mark(s(X)) → active(s(X))
mark(hd(X)) → active(hd(mark(X)))
mark(tl(X)) → active(tl(mark(X)))
adx(mark(X)) → adx(X)
adx(active(X)) → adx(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
incr(mark(X)) → incr(X)
incr(active(X)) → incr(X)
s(mark(X)) → s(X)
s(active(X)) → s(X)
hd(mark(X)) → hd(X)
hd(active(X)) → hd(X)
tl(mark(X)) → tl(X)
tl(active(X)) → tl(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.