Termination w.r.t. Q of the given QTRS could not be shown:

0 QTRS
↳1 DependencyPairsProof (⇔)
↳2 QDP
↳3 DependencyGraphProof (⇔)
↳4 AND
  ↳5 QDP
    ↳6 QDPOrderProof (⇔)
    ↳7 QDP
    ↳8 QDPOrderProof (⇔)
    ↳9 QDP
    ↳10 PisEmptyProof (⇔)
    ↳11 TRUE
  ↳12 QDP
    ↳13 QDPOrderProof (⇔)
    ↳14 QDP
    ↳15 QDPOrderProof (⇔)
    ↳16 QDP
    ↳17 QDPOrderProof (⇔)
    ↳18 QDP
    ↳19 QDPOrderProof (⇔)
    ↳20 QDP
    ↳21 PisEmptyProof (⇔)
    ↳22 TRUE
  ↳23 QDP
    ↳24 QDPOrderProof (⇔)
    ↳25 QDP
    ↳26 QDPOrderProof (⇔)
    ↳27 QDP
    ↳28 QDPOrderProof (⇔)
    ↳29 QDP
    ↳30 QDPOrderProof (⇔)
    ↳31 QDP
    ↳32 PisEmptyProof (⇔)
    ↳33 TRUE
  ↳34 QDP
    ↳35 QDPOrderProof (⇔)
    ↳36 QDP
    ↳37 QDPOrderProof (⇔)
    ↳38 QDP
    ↳39 PisEmptyProof (⇔)
    ↳40 TRUE
  ↳41 QDP
    ↳42 QDPOrderProof (⇔)
    ↳43 QDP
    ↳44 QDPOrderProof (⇔)
    ↳45 QDP
    ↳46 PisEmptyProof (⇔)
    ↳47 TRUE
  ↳48 QDP
    ↳49 QDPOrderProof (⇔)
    ↳50 QDP
    ↳51 QDPOrderProof (⇔)
    ↳52 QDP
    ↳53 QDPOrderProof (⇔)
    ↳54 QDP
    ↳55 QDPOrderProof (⇔)
    ↳56 QDP
    ↳57 PisEmptyProof (⇔)
    ↳58 TRUE
  ↳59 QDP
    ↳60 QDPOrderProof (⇔)
    ↳61 QDP
    ↳62 QDPOrderProof (⇔)
    ↳63 QDP
    ↳64 PisEmptyProof (⇔)
    ↳65 TRUE
  ↳66 QDP
    ↳67 QDPOrderProof (⇔)
    ↳68 QDP
    ↳69 QDPOrderProof (⇔)
    ↳70 QDP
    ↳71 QDPOrderProof (⇔)
    ↳72 QDP
    ↳73 QDPOrderProof (⇔)
    ↳74 QDP
    ↳75 PisEmptyProof (⇔)
    ↳76 TRUE
  ↳77 QDP
    ↳78 QDPOrderProof (⇔)
    ↳79 QDP
    ↳80 QDPOrderProof (⇔)
    ↳81 QDP
    ↳82 QDPOrderProof (⇔)
    ↳83 QDP
    ↳84 QDPOrderProof (⇔)
    ↳85 QDP
    ↳86 PisEmptyProof (⇔)
    ↳87 TRUE
  ↳88 QDP
    ↳89 QDPOrderProof (⇔)
    ↳90 QDP
    ↳91 QDPOrderProof (⇔)
    ↳92 QDP
    ↳93 QDPOrderProof (⇔)
    ↳94 QDP
    ↳95 QDPOrderProof (⇔)
    ↳96 QDP
    ↳97 PisEmptyProof (⇔)
    ↳98 TRUE
  ↳99 QDP
    ↳100 QDPOrderProof (⇔)
    ↳101 QDP
    ↳102 QDPOrderProof (⇔)
    ↳103 QDP
    ↳104 PisEmptyProof (⇔)
    ↳105 TRUE
  ↳106 QDP
    ↳107 QDPOrderProof (⇔)
    ↳108 QDP
    ↳109 QDPOrderProof (⇔)
    ↳110 QDP
    ↳111 QDPOrderProof (⇔)
    ↳112 QDP
    ↳113 QDPOrderProof (⇔)
    ↳114 QDP
    ↳115 PisEmptyProof (⇔)
    ↳116 TRUE
  ↳117 QDP
    ↳118 QDPOrderProof (⇔)
    ↳119 QDP
    ↳120 QDPOrderProof (⇔)
    ↳121 QDP
    ↳122 PisEmptyProof (⇔)
    ↳123 TRUE
  ↳124 QDP
    ↳125 QDPOrderProof (⇔)
    ↳126 QDP
    ↳127 QDPOrderProof (⇔)
    ↳128 QDP

(0) Obligation:

Q restricted rewrite system:
The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.

(1) DependencyPairsProof (EQUIVALENT transformation)

Using Dependency Pairs [AG00,LPAR04] we result in the following initial DP problem.

(2) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(from(X)) → MARK(cons(X, from(s(X))))
ACTIVE(from(X)) → CONS(X, from(s(X)))
ACTIVE(from(X)) → FROM(s(X))
ACTIVE(from(X)) → S(X)
ACTIVE(2ndspos(0, Z)) → MARK(rnil)
ACTIVE(2ndspos(s(N), cons(X, Z))) → MARK(2ndspos(s(N), cons2(X, Z)))
ACTIVE(2ndspos(s(N), cons(X, Z))) → 2NDSPOS(s(N), cons2(X, Z))
ACTIVE(2ndspos(s(N), cons(X, Z))) → CONS2(X, Z)
ACTIVE(2ndspos(s(N), cons2(X, cons(Y, Z)))) → MARK(rcons(posrecip(Y), 2ndsneg(N, Z)))
ACTIVE(2ndspos(s(N), cons2(X, cons(Y, Z)))) → RCONS(posrecip(Y), 2ndsneg(N, Z))
ACTIVE(2ndspos(s(N), cons2(X, cons(Y, Z)))) → POSRECIP(Y)
ACTIVE(2ndspos(s(N), cons2(X, cons(Y, Z)))) → 2NDSNEG(N, Z)
ACTIVE(2ndsneg(0, Z)) → MARK(rnil)
ACTIVE(2ndsneg(s(N), cons(X, Z))) → MARK(2ndsneg(s(N), cons2(X, Z)))
ACTIVE(2ndsneg(s(N), cons(X, Z))) → 2NDSNEG(s(N), cons2(X, Z))
ACTIVE(2ndsneg(s(N), cons(X, Z))) → CONS2(X, Z)
ACTIVE(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → MARK(rcons(negrecip(Y), 2ndspos(N, Z)))
ACTIVE(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → RCONS(negrecip(Y), 2ndspos(N, Z))
ACTIVE(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → NEGRECIP(Y)
ACTIVE(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → 2NDSPOS(N, Z)
ACTIVE(pi(X)) → MARK(2ndspos(X, from(0)))
ACTIVE(pi(X)) → 2NDSPOS(X, from(0))
ACTIVE(pi(X)) → FROM(0)
ACTIVE(plus(0, Y)) → MARK(Y)
ACTIVE(plus(s(X), Y)) → MARK(s(plus(X, Y)))
ACTIVE(plus(s(X), Y)) → S(plus(X, Y))
ACTIVE(plus(s(X), Y)) → PLUS(X, Y)
ACTIVE(times(0, Y)) → MARK(0)
ACTIVE(times(s(X), Y)) → MARK(plus(Y, times(X, Y)))
ACTIVE(times(s(X), Y)) → PLUS(Y, times(X, Y))
ACTIVE(times(s(X), Y)) → TIMES(X, Y)
ACTIVE(square(X)) → MARK(times(X, X))
ACTIVE(square(X)) → TIMES(X, X)
MARK(from(X)) → ACTIVE(from(mark(X)))
MARK(from(X)) → FROM(mark(X))
MARK(from(X)) → MARK(X)
MARK(cons(X1, X2)) → ACTIVE(cons(mark(X1), X2))
MARK(cons(X1, X2)) → CONS(mark(X1), X2)
MARK(cons(X1, X2)) → MARK(X1)
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(s(X)) → S(mark(X))
MARK(s(X)) → MARK(X)
MARK(2ndspos(X1, X2)) → ACTIVE(2ndspos(mark(X1), mark(X2)))
MARK(2ndspos(X1, X2)) → 2NDSPOS(mark(X1), mark(X2))
MARK(2ndspos(X1, X2)) → MARK(X1)
MARK(2ndspos(X1, X2)) → MARK(X2)
MARK(0) → ACTIVE(0)
MARK(rnil) → ACTIVE(rnil)
MARK(cons2(X1, X2)) → ACTIVE(cons2(X1, mark(X2)))
MARK(cons2(X1, X2)) → CONS2(X1, mark(X2))
MARK(cons2(X1, X2)) → MARK(X2)
MARK(rcons(X1, X2)) → ACTIVE(rcons(mark(X1), mark(X2)))
MARK(rcons(X1, X2)) → RCONS(mark(X1), mark(X2))
MARK(rcons(X1, X2)) → MARK(X1)
MARK(rcons(X1, X2)) → MARK(X2)
MARK(posrecip(X)) → ACTIVE(posrecip(mark(X)))
MARK(posrecip(X)) → POSRECIP(mark(X))
MARK(posrecip(X)) → MARK(X)
MARK(2ndsneg(X1, X2)) → ACTIVE(2ndsneg(mark(X1), mark(X2)))
MARK(2ndsneg(X1, X2)) → 2NDSNEG(mark(X1), mark(X2))
MARK(2ndsneg(X1, X2)) → MARK(X1)
MARK(2ndsneg(X1, X2)) → MARK(X2)
MARK(negrecip(X)) → ACTIVE(negrecip(mark(X)))
MARK(negrecip(X)) → NEGRECIP(mark(X))
MARK(negrecip(X)) → MARK(X)
MARK(pi(X)) → ACTIVE(pi(mark(X)))
MARK(pi(X)) → PI(mark(X))
MARK(pi(X)) → MARK(X)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(plus(X1, X2)) → PLUS(mark(X1), mark(X2))
MARK(plus(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
MARK(times(X1, X2)) → ACTIVE(times(mark(X1), mark(X2)))
MARK(times(X1, X2)) → TIMES(mark(X1), mark(X2))
MARK(times(X1, X2)) → MARK(X1)
MARK(times(X1, X2)) → MARK(X2)
MARK(square(X)) → ACTIVE(square(mark(X)))
MARK(square(X)) → SQUARE(mark(X))
MARK(square(X)) → MARK(X)
FROM(mark(X)) → FROM(X)
FROM(active(X)) → FROM(X)
CONS(mark(X1), X2) → CONS(X1, X2)
CONS(X1, mark(X2)) → CONS(X1, X2)
CONS(active(X1), X2) → CONS(X1, X2)
CONS(X1, active(X2)) → CONS(X1, X2)
S(mark(X)) → S(X)
S(active(X)) → S(X)
2NDSPOS(mark(X1), X2) → 2NDSPOS(X1, X2)
2NDSPOS(X1, mark(X2)) → 2NDSPOS(X1, X2)
2NDSPOS(active(X1), X2) → 2NDSPOS(X1, X2)
2NDSPOS(X1, active(X2)) → 2NDSPOS(X1, X2)
CONS2(mark(X1), X2) → CONS2(X1, X2)
CONS2(X1, mark(X2)) → CONS2(X1, X2)
CONS2(active(X1), X2) → CONS2(X1, X2)
CONS2(X1, active(X2)) → CONS2(X1, X2)
RCONS(mark(X1), X2) → RCONS(X1, X2)
RCONS(X1, mark(X2)) → RCONS(X1, X2)
RCONS(active(X1), X2) → RCONS(X1, X2)
RCONS(X1, active(X2)) → RCONS(X1, X2)
POSRECIP(mark(X)) → POSRECIP(X)
POSRECIP(active(X)) → POSRECIP(X)
2NDSNEG(mark(X1), X2) → 2NDSNEG(X1, X2)
2NDSNEG(X1, mark(X2)) → 2NDSNEG(X1, X2)
2NDSNEG(active(X1), X2) → 2NDSNEG(X1, X2)
2NDSNEG(X1, active(X2)) → 2NDSNEG(X1, X2)
NEGRECIP(mark(X)) → NEGRECIP(X)
NEGRECIP(active(X)) → NEGRECIP(X)
PI(mark(X)) → PI(X)
PI(active(X)) → PI(X)
PLUS(mark(X1), X2) → PLUS(X1, X2)
PLUS(X1, mark(X2)) → PLUS(X1, X2)
PLUS(active(X1), X2) → PLUS(X1, X2)
PLUS(X1, active(X2)) → PLUS(X1, X2)
TIMES(mark(X1), X2) → TIMES(X1, X2)
TIMES(X1, mark(X2)) → TIMES(X1, X2)
TIMES(active(X1), X2) → TIMES(X1, X2)
TIMES(X1, active(X2)) → TIMES(X1, X2)
SQUARE(mark(X)) → SQUARE(X)
SQUARE(active(X)) → SQUARE(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(3) DependencyGraphProof (EQUIVALENT transformation)

The approximation of the Dependency Graph [LPAR04,FROCOS05,EDGSTAR] contains 14 SCCs with 38 less nodes.

(4) Complex Obligation (AND)

(5) Obligation:

Q DP problem:
The TRS P consists of the following rules:

SQUARE(active(X)) → SQUARE(X)
SQUARE(mark(X)) → SQUARE(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(6) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


SQUARE(active(X)) → SQUARE(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
SQUARE(x1)  =  SQUARE(x1)
active(x1)  =  active(x1)
mark(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[SQUARE1, active1]

Status:
active1: multiset
SQUARE1: [1]


The following usable rules [FROCOS05] were oriented: none

(7) Obligation:

Q DP problem:
The TRS P consists of the following rules:

SQUARE(mark(X)) → SQUARE(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(8) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


SQUARE(mark(X)) → SQUARE(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
mark1 > SQUARE1

Status:
SQUARE1: multiset
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(9) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(10) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(11) TRUE

(12) Obligation:

Q DP problem:
The TRS P consists of the following rules:

TIMES(X1, mark(X2)) → TIMES(X1, X2)
TIMES(mark(X1), X2) → TIMES(X1, X2)
TIMES(active(X1), X2) → TIMES(X1, X2)
TIMES(X1, active(X2)) → TIMES(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(13) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


TIMES(X1, active(X2)) → TIMES(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
TIMES(x1, x2)  =  x2
mark(x1)  =  x1
active(x1)  =  active(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(14) Obligation:

Q DP problem:
The TRS P consists of the following rules:

TIMES(X1, mark(X2)) → TIMES(X1, X2)
TIMES(mark(X1), X2) → TIMES(X1, X2)
TIMES(active(X1), X2) → TIMES(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(15) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


TIMES(X1, mark(X2)) → TIMES(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
TIMES(x1, x2)  =  TIMES(x2)
mark(x1)  =  mark(x1)
active(x1)  =  active

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active: multiset
TIMES1: [1]
mark1: [1]


The following usable rules [FROCOS05] were oriented: none

(16) Obligation:

Q DP problem:
The TRS P consists of the following rules:

TIMES(mark(X1), X2) → TIMES(X1, X2)
TIMES(active(X1), X2) → TIMES(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(17) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


TIMES(mark(X1), X2) → TIMES(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
TIMES(x1, x2)  =  TIMES(x1, x2)
mark(x1)  =  mark(x1)
active(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[TIMES2, mark1]

Status:
TIMES2: [2,1]
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(18) Obligation:

Q DP problem:
The TRS P consists of the following rules:

TIMES(active(X1), X2) → TIMES(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(19) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


TIMES(active(X1), X2) → TIMES(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active1: [1]
TIMES2: [1,2]


The following usable rules [FROCOS05] were oriented: none

(20) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(21) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(22) TRUE

(23) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PLUS(X1, mark(X2)) → PLUS(X1, X2)
PLUS(mark(X1), X2) → PLUS(X1, X2)
PLUS(active(X1), X2) → PLUS(X1, X2)
PLUS(X1, active(X2)) → PLUS(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(24) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


PLUS(X1, active(X2)) → PLUS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
PLUS(x1, x2)  =  x2
mark(x1)  =  x1
active(x1)  =  active(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(25) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PLUS(X1, mark(X2)) → PLUS(X1, X2)
PLUS(mark(X1), X2) → PLUS(X1, X2)
PLUS(active(X1), X2) → PLUS(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(26) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


PLUS(X1, mark(X2)) → PLUS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
PLUS(x1, x2)  =  PLUS(x2)
mark(x1)  =  mark(x1)
active(x1)  =  active

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active: multiset
mark1: [1]
PLUS1: [1]


The following usable rules [FROCOS05] were oriented: none

(27) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PLUS(mark(X1), X2) → PLUS(X1, X2)
PLUS(active(X1), X2) → PLUS(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(28) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


PLUS(mark(X1), X2) → PLUS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
PLUS(x1, x2)  =  PLUS(x1, x2)
mark(x1)  =  mark(x1)
active(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[PLUS2, mark1]

Status:
PLUS2: [2,1]
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(29) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PLUS(active(X1), X2) → PLUS(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(30) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


PLUS(active(X1), X2) → PLUS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active1: [1]
PLUS2: [1,2]


The following usable rules [FROCOS05] were oriented: none

(31) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(32) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(33) TRUE

(34) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PI(active(X)) → PI(X)
PI(mark(X)) → PI(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(35) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


PI(active(X)) → PI(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
PI(x1)  =  PI(x1)
active(x1)  =  active(x1)
mark(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[PI1, active1]

Status:
active1: multiset
PI1: [1]


The following usable rules [FROCOS05] were oriented: none

(36) Obligation:

Q DP problem:
The TRS P consists of the following rules:

PI(mark(X)) → PI(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(37) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


PI(mark(X)) → PI(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
mark1 > PI1

Status:
PI1: multiset
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(38) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(39) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(40) TRUE

(41) Obligation:

Q DP problem:
The TRS P consists of the following rules:

NEGRECIP(active(X)) → NEGRECIP(X)
NEGRECIP(mark(X)) → NEGRECIP(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(42) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


NEGRECIP(active(X)) → NEGRECIP(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
NEGRECIP(x1)  =  NEGRECIP(x1)
active(x1)  =  active(x1)
mark(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[NEGRECIP1, active1]

Status:
active1: multiset
NEGRECIP1: [1]


The following usable rules [FROCOS05] were oriented: none

(43) Obligation:

Q DP problem:
The TRS P consists of the following rules:

NEGRECIP(mark(X)) → NEGRECIP(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(44) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


NEGRECIP(mark(X)) → NEGRECIP(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
mark1 > NEGRECIP1

Status:
NEGRECIP1: multiset
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(45) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(46) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(47) TRUE

(48) Obligation:

Q DP problem:
The TRS P consists of the following rules:

2NDSNEG(X1, mark(X2)) → 2NDSNEG(X1, X2)
2NDSNEG(mark(X1), X2) → 2NDSNEG(X1, X2)
2NDSNEG(active(X1), X2) → 2NDSNEG(X1, X2)
2NDSNEG(X1, active(X2)) → 2NDSNEG(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(49) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


2NDSNEG(X1, active(X2)) → 2NDSNEG(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
2NDSNEG(x1, x2)  =  x2
mark(x1)  =  x1
active(x1)  =  active(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(50) Obligation:

Q DP problem:
The TRS P consists of the following rules:

2NDSNEG(X1, mark(X2)) → 2NDSNEG(X1, X2)
2NDSNEG(mark(X1), X2) → 2NDSNEG(X1, X2)
2NDSNEG(active(X1), X2) → 2NDSNEG(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(51) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


2NDSNEG(X1, mark(X2)) → 2NDSNEG(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
2NDSNEG(x1, x2)  =  2NDSNEG(x2)
mark(x1)  =  mark(x1)
active(x1)  =  active

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active: multiset
2NDSNEG1: [1]
mark1: [1]


The following usable rules [FROCOS05] were oriented: none

(52) Obligation:

Q DP problem:
The TRS P consists of the following rules:

2NDSNEG(mark(X1), X2) → 2NDSNEG(X1, X2)
2NDSNEG(active(X1), X2) → 2NDSNEG(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(53) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


2NDSNEG(mark(X1), X2) → 2NDSNEG(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
2NDSNEG(x1, x2)  =  2NDSNEG(x1, x2)
mark(x1)  =  mark(x1)
active(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[2NDSNEG2, mark1]

Status:
2NDSNEG2: [2,1]
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(54) Obligation:

Q DP problem:
The TRS P consists of the following rules:

2NDSNEG(active(X1), X2) → 2NDSNEG(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(55) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


2NDSNEG(active(X1), X2) → 2NDSNEG(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active1: [1]
2NDSNEG2: [1,2]


The following usable rules [FROCOS05] were oriented: none

(56) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(57) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(58) TRUE

(59) Obligation:

Q DP problem:
The TRS P consists of the following rules:

POSRECIP(active(X)) → POSRECIP(X)
POSRECIP(mark(X)) → POSRECIP(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(60) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


POSRECIP(active(X)) → POSRECIP(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
POSRECIP(x1)  =  POSRECIP(x1)
active(x1)  =  active(x1)
mark(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[POSRECIP1, active1]

Status:
active1: multiset
POSRECIP1: [1]


The following usable rules [FROCOS05] were oriented: none

(61) Obligation:

Q DP problem:
The TRS P consists of the following rules:

POSRECIP(mark(X)) → POSRECIP(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(62) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


POSRECIP(mark(X)) → POSRECIP(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
mark1 > POSRECIP1

Status:
mark1: multiset
POSRECIP1: multiset


The following usable rules [FROCOS05] were oriented: none

(63) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(64) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(65) TRUE

(66) Obligation:

Q DP problem:
The TRS P consists of the following rules:

RCONS(X1, mark(X2)) → RCONS(X1, X2)
RCONS(mark(X1), X2) → RCONS(X1, X2)
RCONS(active(X1), X2) → RCONS(X1, X2)
RCONS(X1, active(X2)) → RCONS(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(67) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


RCONS(X1, active(X2)) → RCONS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
RCONS(x1, x2)  =  x2
mark(x1)  =  x1
active(x1)  =  active(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(68) Obligation:

Q DP problem:
The TRS P consists of the following rules:

RCONS(X1, mark(X2)) → RCONS(X1, X2)
RCONS(mark(X1), X2) → RCONS(X1, X2)
RCONS(active(X1), X2) → RCONS(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(69) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


RCONS(X1, mark(X2)) → RCONS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
RCONS(x1, x2)  =  RCONS(x2)
mark(x1)  =  mark(x1)
active(x1)  =  active

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active: multiset
RCONS1: [1]
mark1: [1]


The following usable rules [FROCOS05] were oriented: none

(70) Obligation:

Q DP problem:
The TRS P consists of the following rules:

RCONS(mark(X1), X2) → RCONS(X1, X2)
RCONS(active(X1), X2) → RCONS(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(71) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


RCONS(mark(X1), X2) → RCONS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
RCONS(x1, x2)  =  RCONS(x1, x2)
mark(x1)  =  mark(x1)
active(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[RCONS2, mark1]

Status:
RCONS2: [2,1]
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(72) Obligation:

Q DP problem:
The TRS P consists of the following rules:

RCONS(active(X1), X2) → RCONS(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(73) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


RCONS(active(X1), X2) → RCONS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active1: [1]
RCONS2: [1,2]


The following usable rules [FROCOS05] were oriented: none

(74) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(75) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(76) TRUE

(77) Obligation:

Q DP problem:
The TRS P consists of the following rules:

CONS2(X1, mark(X2)) → CONS2(X1, X2)
CONS2(mark(X1), X2) → CONS2(X1, X2)
CONS2(active(X1), X2) → CONS2(X1, X2)
CONS2(X1, active(X2)) → CONS2(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(78) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


CONS2(X1, active(X2)) → CONS2(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
CONS2(x1, x2)  =  x2
mark(x1)  =  x1
active(x1)  =  active(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(79) Obligation:

Q DP problem:
The TRS P consists of the following rules:

CONS2(X1, mark(X2)) → CONS2(X1, X2)
CONS2(mark(X1), X2) → CONS2(X1, X2)
CONS2(active(X1), X2) → CONS2(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(80) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


CONS2(X1, mark(X2)) → CONS2(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
CONS2(x1, x2)  =  CONS2(x2)
mark(x1)  =  mark(x1)
active(x1)  =  active

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active: multiset
CONS21: [1]
mark1: [1]


The following usable rules [FROCOS05] were oriented: none

(81) Obligation:

Q DP problem:
The TRS P consists of the following rules:

CONS2(mark(X1), X2) → CONS2(X1, X2)
CONS2(active(X1), X2) → CONS2(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(82) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


CONS2(mark(X1), X2) → CONS2(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
CONS2(x1, x2)  =  CONS2(x1, x2)
mark(x1)  =  mark(x1)
active(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[CONS22, mark1]

Status:
CONS22: [2,1]
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(83) Obligation:

Q DP problem:
The TRS P consists of the following rules:

CONS2(active(X1), X2) → CONS2(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(84) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


CONS2(active(X1), X2) → CONS2(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active1: [1]
CONS22: [1,2]


The following usable rules [FROCOS05] were oriented: none

(85) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(86) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(87) TRUE

(88) Obligation:

Q DP problem:
The TRS P consists of the following rules:

2NDSPOS(X1, mark(X2)) → 2NDSPOS(X1, X2)
2NDSPOS(mark(X1), X2) → 2NDSPOS(X1, X2)
2NDSPOS(active(X1), X2) → 2NDSPOS(X1, X2)
2NDSPOS(X1, active(X2)) → 2NDSPOS(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(89) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


2NDSPOS(X1, active(X2)) → 2NDSPOS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
2NDSPOS(x1, x2)  =  x2
mark(x1)  =  x1
active(x1)  =  active(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(90) Obligation:

Q DP problem:
The TRS P consists of the following rules:

2NDSPOS(X1, mark(X2)) → 2NDSPOS(X1, X2)
2NDSPOS(mark(X1), X2) → 2NDSPOS(X1, X2)
2NDSPOS(active(X1), X2) → 2NDSPOS(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(91) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


2NDSPOS(X1, mark(X2)) → 2NDSPOS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
2NDSPOS(x1, x2)  =  2NDSPOS(x2)
mark(x1)  =  mark(x1)
active(x1)  =  active

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active: multiset
2NDSPOS1: [1]
mark1: [1]


The following usable rules [FROCOS05] were oriented: none

(92) Obligation:

Q DP problem:
The TRS P consists of the following rules:

2NDSPOS(mark(X1), X2) → 2NDSPOS(X1, X2)
2NDSPOS(active(X1), X2) → 2NDSPOS(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(93) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


2NDSPOS(mark(X1), X2) → 2NDSPOS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
2NDSPOS(x1, x2)  =  2NDSPOS(x1, x2)
mark(x1)  =  mark(x1)
active(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[2NDSPOS2, mark1]

Status:
mark1: multiset
2NDSPOS2: [2,1]


The following usable rules [FROCOS05] were oriented: none

(94) Obligation:

Q DP problem:
The TRS P consists of the following rules:

2NDSPOS(active(X1), X2) → 2NDSPOS(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(95) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


2NDSPOS(active(X1), X2) → 2NDSPOS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active1: [1]
2NDSPOS2: [1,2]


The following usable rules [FROCOS05] were oriented: none

(96) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(97) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(98) TRUE

(99) Obligation:

Q DP problem:
The TRS P consists of the following rules:

S(active(X)) → S(X)
S(mark(X)) → S(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(100) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


S(active(X)) → S(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
S(x1)  =  S(x1)
active(x1)  =  active(x1)
mark(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[S1, active1]

Status:
active1: multiset
S1: [1]


The following usable rules [FROCOS05] were oriented: none

(101) Obligation:

Q DP problem:
The TRS P consists of the following rules:

S(mark(X)) → S(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(102) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


S(mark(X)) → S(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
mark1 > S1

Status:
mark1: multiset
S1: multiset


The following usable rules [FROCOS05] were oriented: none

(103) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(104) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(105) TRUE

(106) Obligation:

Q DP problem:
The TRS P consists of the following rules:

CONS(X1, mark(X2)) → CONS(X1, X2)
CONS(mark(X1), X2) → CONS(X1, X2)
CONS(active(X1), X2) → CONS(X1, X2)
CONS(X1, active(X2)) → CONS(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(107) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


CONS(X1, active(X2)) → CONS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
CONS(x1, x2)  =  x2
mark(x1)  =  x1
active(x1)  =  active(x1)

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active1: multiset


The following usable rules [FROCOS05] were oriented: none

(108) Obligation:

Q DP problem:
The TRS P consists of the following rules:

CONS(X1, mark(X2)) → CONS(X1, X2)
CONS(mark(X1), X2) → CONS(X1, X2)
CONS(active(X1), X2) → CONS(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(109) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


CONS(X1, mark(X2)) → CONS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
CONS(x1, x2)  =  CONS(x2)
mark(x1)  =  mark(x1)
active(x1)  =  active

Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active: multiset
CONS1: [1]
mark1: [1]


The following usable rules [FROCOS05] were oriented: none

(110) Obligation:

Q DP problem:
The TRS P consists of the following rules:

CONS(mark(X1), X2) → CONS(X1, X2)
CONS(active(X1), X2) → CONS(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(111) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


CONS(mark(X1), X2) → CONS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
CONS(x1, x2)  =  CONS(x1, x2)
mark(x1)  =  mark(x1)
active(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[CONS2, mark1]

Status:
CONS2: [2,1]
mark1: multiset


The following usable rules [FROCOS05] were oriented: none

(112) Obligation:

Q DP problem:
The TRS P consists of the following rules:

CONS(active(X1), X2) → CONS(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(113) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


CONS(active(X1), X2) → CONS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
trivial

Status:
active1: [1]
CONS2: [1,2]


The following usable rules [FROCOS05] were oriented: none

(114) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(115) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(116) TRUE

(117) Obligation:

Q DP problem:
The TRS P consists of the following rules:

FROM(active(X)) → FROM(X)
FROM(mark(X)) → FROM(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(118) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


FROM(active(X)) → FROM(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
FROM(x1)  =  FROM(x1)
active(x1)  =  active(x1)
mark(x1)  =  x1

Recursive path order with status [RPO].
Quasi-Precedence:
[FROM1, active1]

Status:
active1: multiset
FROM1: [1]


The following usable rules [FROCOS05] were oriented: none

(119) Obligation:

Q DP problem:
The TRS P consists of the following rules:

FROM(mark(X)) → FROM(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(120) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


FROM(mark(X)) → FROM(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Recursive path order with status [RPO].
Quasi-Precedence:
mark1 > FROM1

Status:
mark1: multiset
FROM1: multiset


The following usable rules [FROCOS05] were oriented: none

(121) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(122) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(123) TRUE

(124) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(from(X)) → ACTIVE(from(mark(X)))
ACTIVE(from(X)) → MARK(cons(X, from(s(X))))
MARK(from(X)) → MARK(X)
MARK(cons(X1, X2)) → ACTIVE(cons(mark(X1), X2))
ACTIVE(2ndspos(s(N), cons(X, Z))) → MARK(2ndspos(s(N), cons2(X, Z)))
MARK(cons(X1, X2)) → MARK(X1)
MARK(s(X)) → ACTIVE(s(mark(X)))
ACTIVE(2ndspos(s(N), cons2(X, cons(Y, Z)))) → MARK(rcons(posrecip(Y), 2ndsneg(N, Z)))
MARK(s(X)) → MARK(X)
MARK(2ndspos(X1, X2)) → ACTIVE(2ndspos(mark(X1), mark(X2)))
ACTIVE(2ndsneg(s(N), cons(X, Z))) → MARK(2ndsneg(s(N), cons2(X, Z)))
MARK(2ndspos(X1, X2)) → MARK(X1)
MARK(2ndspos(X1, X2)) → MARK(X2)
MARK(cons2(X1, X2)) → ACTIVE(cons2(X1, mark(X2)))
ACTIVE(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → MARK(rcons(negrecip(Y), 2ndspos(N, Z)))
MARK(cons2(X1, X2)) → MARK(X2)
MARK(rcons(X1, X2)) → ACTIVE(rcons(mark(X1), mark(X2)))
ACTIVE(pi(X)) → MARK(2ndspos(X, from(0)))
MARK(rcons(X1, X2)) → MARK(X1)
MARK(rcons(X1, X2)) → MARK(X2)
MARK(posrecip(X)) → ACTIVE(posrecip(mark(X)))
ACTIVE(plus(0, Y)) → MARK(Y)
MARK(posrecip(X)) → MARK(X)
MARK(2ndsneg(X1, X2)) → ACTIVE(2ndsneg(mark(X1), mark(X2)))
ACTIVE(plus(s(X), Y)) → MARK(s(plus(X, Y)))
MARK(2ndsneg(X1, X2)) → MARK(X1)
MARK(2ndsneg(X1, X2)) → MARK(X2)
MARK(negrecip(X)) → ACTIVE(negrecip(mark(X)))
ACTIVE(times(s(X), Y)) → MARK(plus(Y, times(X, Y)))
MARK(negrecip(X)) → MARK(X)
MARK(pi(X)) → ACTIVE(pi(mark(X)))
ACTIVE(square(X)) → MARK(times(X, X))
MARK(pi(X)) → MARK(X)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(plus(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
MARK(times(X1, X2)) → ACTIVE(times(mark(X1), mark(X2)))
MARK(times(X1, X2)) → MARK(X1)
MARK(times(X1, X2)) → MARK(X2)
MARK(square(X)) → ACTIVE(square(mark(X)))
MARK(square(X)) → MARK(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(125) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(rcons(X1, X2)) → ACTIVE(rcons(mark(X1), mark(X2)))
MARK(negrecip(X)) → ACTIVE(negrecip(mark(X)))
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  MARK
from(x1)  =  from
ACTIVE(x1)  =  x1
mark(x1)  =  mark
cons(x1, x2)  =  cons
s(x1)  =  s
2ndspos(x1, x2)  =  2ndspos
cons2(x1, x2)  =  cons2
rcons(x1, x2)  =  rcons
posrecip(x1)  =  posrecip
2ndsneg(x1, x2)  =  2ndsneg
negrecip(x1)  =  negrecip
pi(x1)  =  pi
0  =  0
plus(x1, x2)  =  plus
times(x1, x2)  =  times
square(x1)  =  square
active(x1)  =  active
rnil  =  rnil

Recursive path order with status [RPO].
Quasi-Precedence:
mark > active > [MARK, from, cons, 2ndspos, cons2, posrecip, 2ndsneg, pi, plus, times, square] > s > rcons
mark > active > [MARK, from, cons, 2ndspos, cons2, posrecip, 2ndsneg, pi, plus, times, square] > s > negrecip
mark > active > [MARK, from, cons, 2ndspos, cons2, posrecip, 2ndsneg, pi, plus, times, square] > 0 > rnil

Status:
active: multiset
MARK: []
rnil: multiset
cons2: []
plus: []
s: []
2ndsneg: []
0: multiset
2ndspos: []
from: []
negrecip: multiset
cons: []
rcons: multiset
mark: multiset
pi: []
times: []
square: []
posrecip: []


The following usable rules [FROCOS05] were oriented:

times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
times(mark(X1), X2) → times(X1, X2)
square(active(X)) → square(X)
square(mark(X)) → square(X)
from(active(X)) → from(X)
from(mark(X)) → from(X)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
cons(X1, active(X2)) → cons(X1, X2)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
posrecip(active(X)) → posrecip(X)
posrecip(mark(X)) → posrecip(X)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)

(126) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(from(X)) → ACTIVE(from(mark(X)))
ACTIVE(from(X)) → MARK(cons(X, from(s(X))))
MARK(from(X)) → MARK(X)
MARK(cons(X1, X2)) → ACTIVE(cons(mark(X1), X2))
ACTIVE(2ndspos(s(N), cons(X, Z))) → MARK(2ndspos(s(N), cons2(X, Z)))
MARK(cons(X1, X2)) → MARK(X1)
ACTIVE(2ndspos(s(N), cons2(X, cons(Y, Z)))) → MARK(rcons(posrecip(Y), 2ndsneg(N, Z)))
MARK(s(X)) → MARK(X)
MARK(2ndspos(X1, X2)) → ACTIVE(2ndspos(mark(X1), mark(X2)))
ACTIVE(2ndsneg(s(N), cons(X, Z))) → MARK(2ndsneg(s(N), cons2(X, Z)))
MARK(2ndspos(X1, X2)) → MARK(X1)
MARK(2ndspos(X1, X2)) → MARK(X2)
MARK(cons2(X1, X2)) → ACTIVE(cons2(X1, mark(X2)))
ACTIVE(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → MARK(rcons(negrecip(Y), 2ndspos(N, Z)))
MARK(cons2(X1, X2)) → MARK(X2)
ACTIVE(pi(X)) → MARK(2ndspos(X, from(0)))
MARK(rcons(X1, X2)) → MARK(X1)
MARK(rcons(X1, X2)) → MARK(X2)
MARK(posrecip(X)) → ACTIVE(posrecip(mark(X)))
ACTIVE(plus(0, Y)) → MARK(Y)
MARK(posrecip(X)) → MARK(X)
MARK(2ndsneg(X1, X2)) → ACTIVE(2ndsneg(mark(X1), mark(X2)))
ACTIVE(plus(s(X), Y)) → MARK(s(plus(X, Y)))
MARK(2ndsneg(X1, X2)) → MARK(X1)
MARK(2ndsneg(X1, X2)) → MARK(X2)
ACTIVE(times(s(X), Y)) → MARK(plus(Y, times(X, Y)))
MARK(negrecip(X)) → MARK(X)
MARK(pi(X)) → ACTIVE(pi(mark(X)))
ACTIVE(square(X)) → MARK(times(X, X))
MARK(pi(X)) → MARK(X)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(plus(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
MARK(times(X1, X2)) → ACTIVE(times(mark(X1), mark(X2)))
MARK(times(X1, X2)) → MARK(X1)
MARK(times(X1, X2)) → MARK(X2)
MARK(square(X)) → ACTIVE(square(mark(X)))
MARK(square(X)) → MARK(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(127) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


MARK(cons(X1, X2)) → ACTIVE(cons(mark(X1), X2))
MARK(cons2(X1, X2)) → ACTIVE(cons2(X1, mark(X2)))
MARK(posrecip(X)) → ACTIVE(posrecip(mark(X)))
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  MARK
from(x1)  =  from
ACTIVE(x1)  =  x1
mark(x1)  =  x1
cons(x1, x2)  =  cons
s(x1)  =  s
2ndspos(x1, x2)  =  2ndspos
cons2(x1, x2)  =  cons2
rcons(x1, x2)  =  x1
posrecip(x1)  =  posrecip
2ndsneg(x1, x2)  =  2ndsneg
negrecip(x1)  =  negrecip
pi(x1)  =  pi
0  =  0
plus(x1, x2)  =  plus
times(x1, x2)  =  times
square(x1)  =  square
active(x1)  =  active
rnil  =  rnil

Recursive path order with status [RPO].
Quasi-Precedence:
[MARK, from, s, 2ndspos, 2ndsneg, pi, plus, times, square, active] > [cons, posrecip] > [cons2, negrecip]
[MARK, from, s, 2ndspos, 2ndsneg, pi, plus, times, square, active] > 0 > rnil

Status:
active: multiset
MARK: []
rnil: multiset
cons2: multiset
plus: []
s: multiset
2ndsneg: []
0: multiset
2ndspos: []
negrecip: []
from: []
cons: multiset
times: []
pi: []
square: []
posrecip: multiset


The following usable rules [FROCOS05] were oriented:

times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
times(mark(X1), X2) → times(X1, X2)
square(active(X)) → square(X)
square(mark(X)) → square(X)
from(active(X)) → from(X)
from(mark(X)) → from(X)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
posrecip(active(X)) → posrecip(X)
posrecip(mark(X)) → posrecip(X)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)

(128) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(from(X)) → ACTIVE(from(mark(X)))
ACTIVE(from(X)) → MARK(cons(X, from(s(X))))
MARK(from(X)) → MARK(X)
ACTIVE(2ndspos(s(N), cons(X, Z))) → MARK(2ndspos(s(N), cons2(X, Z)))
MARK(cons(X1, X2)) → MARK(X1)
ACTIVE(2ndspos(s(N), cons2(X, cons(Y, Z)))) → MARK(rcons(posrecip(Y), 2ndsneg(N, Z)))
MARK(s(X)) → MARK(X)
MARK(2ndspos(X1, X2)) → ACTIVE(2ndspos(mark(X1), mark(X2)))
ACTIVE(2ndsneg(s(N), cons(X, Z))) → MARK(2ndsneg(s(N), cons2(X, Z)))
MARK(2ndspos(X1, X2)) → MARK(X1)
MARK(2ndspos(X1, X2)) → MARK(X2)
ACTIVE(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → MARK(rcons(negrecip(Y), 2ndspos(N, Z)))
MARK(cons2(X1, X2)) → MARK(X2)
ACTIVE(pi(X)) → MARK(2ndspos(X, from(0)))
MARK(rcons(X1, X2)) → MARK(X1)
MARK(rcons(X1, X2)) → MARK(X2)
ACTIVE(plus(0, Y)) → MARK(Y)
MARK(posrecip(X)) → MARK(X)
MARK(2ndsneg(X1, X2)) → ACTIVE(2ndsneg(mark(X1), mark(X2)))
ACTIVE(plus(s(X), Y)) → MARK(s(plus(X, Y)))
MARK(2ndsneg(X1, X2)) → MARK(X1)
MARK(2ndsneg(X1, X2)) → MARK(X2)
ACTIVE(times(s(X), Y)) → MARK(plus(Y, times(X, Y)))
MARK(negrecip(X)) → MARK(X)
MARK(pi(X)) → ACTIVE(pi(mark(X)))
ACTIVE(square(X)) → MARK(times(X, X))
MARK(pi(X)) → MARK(X)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(plus(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
MARK(times(X1, X2)) → ACTIVE(times(mark(X1), mark(X2)))
MARK(times(X1, X2)) → MARK(X1)
MARK(times(X1, X2)) → MARK(X2)
MARK(square(X)) → ACTIVE(square(mark(X)))
MARK(square(X)) → MARK(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(2ndspos(0, Z)) → mark(rnil)
active(2ndspos(s(N), cons(X, Z))) → mark(2ndspos(s(N), cons2(X, Z)))
active(2ndspos(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(posrecip(Y), 2ndsneg(N, Z)))
active(2ndsneg(0, Z)) → mark(rnil)
active(2ndsneg(s(N), cons(X, Z))) → mark(2ndsneg(s(N), cons2(X, Z)))
active(2ndsneg(s(N), cons2(X, cons(Y, Z)))) → mark(rcons(negrecip(Y), 2ndspos(N, Z)))
active(pi(X)) → mark(2ndspos(X, from(0)))
active(plus(0, Y)) → mark(Y)
active(plus(s(X), Y)) → mark(s(plus(X, Y)))
active(times(0, Y)) → mark(0)
active(times(s(X), Y)) → mark(plus(Y, times(X, Y)))
active(square(X)) → mark(times(X, X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(2ndspos(X1, X2)) → active(2ndspos(mark(X1), mark(X2)))
mark(0) → active(0)
mark(rnil) → active(rnil)
mark(cons2(X1, X2)) → active(cons2(X1, mark(X2)))
mark(rcons(X1, X2)) → active(rcons(mark(X1), mark(X2)))
mark(posrecip(X)) → active(posrecip(mark(X)))
mark(2ndsneg(X1, X2)) → active(2ndsneg(mark(X1), mark(X2)))
mark(negrecip(X)) → active(negrecip(mark(X)))
mark(pi(X)) → active(pi(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(times(X1, X2)) → active(times(mark(X1), mark(X2)))
mark(square(X)) → active(square(mark(X)))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
2ndspos(mark(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, mark(X2)) → 2ndspos(X1, X2)
2ndspos(active(X1), X2) → 2ndspos(X1, X2)
2ndspos(X1, active(X2)) → 2ndspos(X1, X2)
cons2(mark(X1), X2) → cons2(X1, X2)
cons2(X1, mark(X2)) → cons2(X1, X2)
cons2(active(X1), X2) → cons2(X1, X2)
cons2(X1, active(X2)) → cons2(X1, X2)
rcons(mark(X1), X2) → rcons(X1, X2)
rcons(X1, mark(X2)) → rcons(X1, X2)
rcons(active(X1), X2) → rcons(X1, X2)
rcons(X1, active(X2)) → rcons(X1, X2)
posrecip(mark(X)) → posrecip(X)
posrecip(active(X)) → posrecip(X)
2ndsneg(mark(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, mark(X2)) → 2ndsneg(X1, X2)
2ndsneg(active(X1), X2) → 2ndsneg(X1, X2)
2ndsneg(X1, active(X2)) → 2ndsneg(X1, X2)
negrecip(mark(X)) → negrecip(X)
negrecip(active(X)) → negrecip(X)
pi(mark(X)) → pi(X)
pi(active(X)) → pi(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
times(mark(X1), X2) → times(X1, X2)
times(X1, mark(X2)) → times(X1, X2)
times(active(X1), X2) → times(X1, X2)
times(X1, active(X2)) → times(X1, X2)
square(mark(X)) → square(X)
square(active(X)) → square(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.