(0) Obligation:

Q restricted rewrite system:
The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

Q is empty.

(1) DependencyPairsProof (EQUIVALENT transformation)

Using Dependency Pairs [AG00,LPAR04] we result in the following initial DP problem.

(2) Obligation:

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(from(X)) → MARK(cons(X, from(s(X))))
ACTIVE(from(X)) → CONS(X, from(s(X)))
ACTIVE(from(X)) → FROM(s(X))
ACTIVE(from(X)) → S(X)
ACTIVE(length(nil)) → MARK(0)
ACTIVE(length(cons(X, Y))) → MARK(s(length1(Y)))
ACTIVE(length(cons(X, Y))) → S(length1(Y))
ACTIVE(length(cons(X, Y))) → LENGTH1(Y)
ACTIVE(length1(X)) → MARK(length(X))
ACTIVE(length1(X)) → LENGTH(X)
MARK(from(X)) → ACTIVE(from(mark(X)))
MARK(from(X)) → FROM(mark(X))
MARK(from(X)) → MARK(X)
MARK(cons(X1, X2)) → ACTIVE(cons(mark(X1), X2))
MARK(cons(X1, X2)) → CONS(mark(X1), X2)
MARK(cons(X1, X2)) → MARK(X1)
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(s(X)) → S(mark(X))
MARK(s(X)) → MARK(X)
MARK(length(X)) → ACTIVE(length(X))
MARK(nil) → ACTIVE(nil)
MARK(0) → ACTIVE(0)
MARK(length1(X)) → ACTIVE(length1(X))
FROM(mark(X)) → FROM(X)
FROM(active(X)) → FROM(X)
CONS(mark(X1), X2) → CONS(X1, X2)
CONS(X1, mark(X2)) → CONS(X1, X2)
CONS(active(X1), X2) → CONS(X1, X2)
CONS(X1, active(X2)) → CONS(X1, X2)
S(mark(X)) → S(X)
S(active(X)) → S(X)
LENGTH(mark(X)) → LENGTH(X)
LENGTH(active(X)) → LENGTH(X)
LENGTH1(mark(X)) → LENGTH1(X)
LENGTH1(active(X)) → LENGTH1(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(3) DependencyGraphProof (EQUIVALENT transformation)

The approximation of the Dependency Graph [LPAR04,FROCOS05,EDGSTAR] contains 6 SCCs with 12 less nodes.

(4) Complex Obligation (AND)

(5) Obligation:

Q DP problem:
The TRS P consists of the following rules:

LENGTH1(active(X)) → LENGTH1(X)
LENGTH1(mark(X)) → LENGTH1(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(6) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


LENGTH1(mark(X)) → LENGTH1(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
LENGTH1(x1)  =  x1
active(x1)  =  x1
mark(x1)  =  mark(x1)
from(x1)  =  from
cons(x1, x2)  =  cons
s(x1)  =  s
length(x1)  =  length
nil  =  nil
0  =  0
length1(x1)  =  length1

Lexicographic path order with status [LPO].
Precedence:
from > cons > length1 > length > mark1 > nil > 0 > s

Status:
mark1: [1]
from: []
cons: []
s: []
length: []
nil: []
0: []
length1: []

The following usable rules [FROCOS05] were oriented:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

(7) Obligation:

Q DP problem:
The TRS P consists of the following rules:

LENGTH1(active(X)) → LENGTH1(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(8) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


LENGTH1(active(X)) → LENGTH1(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
LENGTH1(x1)  =  x1
active(x1)  =  active(x1)
from(x1)  =  from
mark(x1)  =  mark(x1)
cons(x1, x2)  =  cons
s(x1)  =  s
length(x1)  =  length(x1)
nil  =  nil
0  =  0
length1(x1)  =  length1(x1)

Lexicographic path order with status [LPO].
Precedence:
from > mark1 > active1 > 0 > s
from > mark1 > nil > 0 > s
from > cons > active1 > 0 > s
length11 > length1 > mark1 > active1 > 0 > s
length11 > length1 > mark1 > nil > 0 > s

Status:
active1: [1]
from: []
mark1: [1]
cons: []
s: []
length1: [1]
nil: []
0: []
length11: [1]

The following usable rules [FROCOS05] were oriented:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

(9) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(10) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(11) TRUE

(12) Obligation:

Q DP problem:
The TRS P consists of the following rules:

LENGTH(active(X)) → LENGTH(X)
LENGTH(mark(X)) → LENGTH(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(13) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


LENGTH(mark(X)) → LENGTH(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
LENGTH(x1)  =  x1
active(x1)  =  x1
mark(x1)  =  mark(x1)
from(x1)  =  from
cons(x1, x2)  =  cons
s(x1)  =  s
length(x1)  =  length
nil  =  nil
0  =  0
length1(x1)  =  length1

Lexicographic path order with status [LPO].
Precedence:
from > cons > length1 > length > mark1 > nil > 0 > s

Status:
mark1: [1]
from: []
cons: []
s: []
length: []
nil: []
0: []
length1: []

The following usable rules [FROCOS05] were oriented:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

(14) Obligation:

Q DP problem:
The TRS P consists of the following rules:

LENGTH(active(X)) → LENGTH(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(15) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


LENGTH(active(X)) → LENGTH(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
LENGTH(x1)  =  x1
active(x1)  =  active(x1)
from(x1)  =  from
mark(x1)  =  mark(x1)
cons(x1, x2)  =  cons
s(x1)  =  s
length(x1)  =  length(x1)
nil  =  nil
0  =  0
length1(x1)  =  length1(x1)

Lexicographic path order with status [LPO].
Precedence:
from > mark1 > active1 > 0 > s
from > mark1 > nil > 0 > s
from > cons > active1 > 0 > s
length11 > length1 > mark1 > active1 > 0 > s
length11 > length1 > mark1 > nil > 0 > s

Status:
active1: [1]
from: []
mark1: [1]
cons: []
s: []
length1: [1]
nil: []
0: []
length11: [1]

The following usable rules [FROCOS05] were oriented:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

(16) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(17) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(18) TRUE

(19) Obligation:

Q DP problem:
The TRS P consists of the following rules:

S(active(X)) → S(X)
S(mark(X)) → S(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(20) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


S(mark(X)) → S(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
S(x1)  =  x1
active(x1)  =  x1
mark(x1)  =  mark(x1)
from(x1)  =  from
cons(x1, x2)  =  cons
s(x1)  =  s
length(x1)  =  length
nil  =  nil
0  =  0
length1(x1)  =  length1

Lexicographic path order with status [LPO].
Precedence:
from > cons > length1 > length > mark1 > nil > 0 > s

Status:
mark1: [1]
from: []
cons: []
s: []
length: []
nil: []
0: []
length1: []

The following usable rules [FROCOS05] were oriented:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

(21) Obligation:

Q DP problem:
The TRS P consists of the following rules:

S(active(X)) → S(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(22) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


S(active(X)) → S(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
S(x1)  =  x1
active(x1)  =  active(x1)
from(x1)  =  from
mark(x1)  =  mark(x1)
cons(x1, x2)  =  cons
s(x1)  =  s
length(x1)  =  length(x1)
nil  =  nil
0  =  0
length1(x1)  =  length1(x1)

Lexicographic path order with status [LPO].
Precedence:
from > mark1 > active1 > 0 > s
from > mark1 > nil > 0 > s
from > cons > active1 > 0 > s
length11 > length1 > mark1 > active1 > 0 > s
length11 > length1 > mark1 > nil > 0 > s

Status:
active1: [1]
from: []
mark1: [1]
cons: []
s: []
length1: [1]
nil: []
0: []
length11: [1]

The following usable rules [FROCOS05] were oriented:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

(23) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(24) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(25) TRUE

(26) Obligation:

Q DP problem:
The TRS P consists of the following rules:

CONS(X1, mark(X2)) → CONS(X1, X2)
CONS(mark(X1), X2) → CONS(X1, X2)
CONS(active(X1), X2) → CONS(X1, X2)
CONS(X1, active(X2)) → CONS(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(27) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


CONS(X1, mark(X2)) → CONS(X1, X2)
CONS(X1, active(X2)) → CONS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
CONS(x1, x2)  =  x2
mark(x1)  =  mark(x1)
active(x1)  =  active(x1)
from(x1)  =  from
cons(x1, x2)  =  cons
s(x1)  =  s
length(x1)  =  length(x1)
nil  =  nil
0  =  0
length1(x1)  =  length1(x1)

Lexicographic path order with status [LPO].
Precedence:
from > mark1 > active1 > 0 > s
from > mark1 > nil > 0 > s
from > cons > active1 > 0 > s
length11 > length1 > mark1 > active1 > 0 > s
length11 > length1 > mark1 > nil > 0 > s

Status:
mark1: [1]
active1: [1]
from: []
cons: []
s: []
length1: [1]
nil: []
0: []
length11: [1]

The following usable rules [FROCOS05] were oriented:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

(28) Obligation:

Q DP problem:
The TRS P consists of the following rules:

CONS(mark(X1), X2) → CONS(X1, X2)
CONS(active(X1), X2) → CONS(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(29) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


CONS(mark(X1), X2) → CONS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
CONS(x1, x2)  =  CONS(x1)
mark(x1)  =  mark(x1)
active(x1)  =  x1
from(x1)  =  from
cons(x1, x2)  =  cons
s(x1)  =  s
length(x1)  =  length(x1)
nil  =  nil
0  =  0
length1(x1)  =  length1(x1)

Lexicographic path order with status [LPO].
Precedence:
CONS1 > s
from > mark1 > nil > 0 > s
from > cons > s
length11 > length1 > mark1 > nil > 0 > s

Status:
CONS1: [1]
mark1: [1]
from: []
cons: []
s: []
length1: [1]
nil: []
0: []
length11: [1]

The following usable rules [FROCOS05] were oriented:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

(30) Obligation:

Q DP problem:
The TRS P consists of the following rules:

CONS(active(X1), X2) → CONS(X1, X2)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(31) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


CONS(active(X1), X2) → CONS(X1, X2)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
CONS(x1, x2)  =  CONS(x1, x2)
active(x1)  =  active(x1)
from(x1)  =  from
mark(x1)  =  mark(x1)
cons(x1, x2)  =  cons
s(x1)  =  s
length(x1)  =  length
nil  =  nil
0  =  0
length1(x1)  =  length1(x1)

Lexicographic path order with status [LPO].
Precedence:
CONS2 > s
from > mark1 > cons > active1 > 0 > s
from > mark1 > nil > 0 > s
length11 > length > mark1 > cons > active1 > 0 > s
length11 > length > mark1 > nil > 0 > s

Status:
CONS2: [1,2]
active1: [1]
from: []
mark1: [1]
cons: []
s: []
length: []
nil: []
0: []
length11: [1]

The following usable rules [FROCOS05] were oriented:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

(32) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(33) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(34) TRUE

(35) Obligation:

Q DP problem:
The TRS P consists of the following rules:

FROM(active(X)) → FROM(X)
FROM(mark(X)) → FROM(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(36) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


FROM(mark(X)) → FROM(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
FROM(x1)  =  x1
active(x1)  =  x1
mark(x1)  =  mark(x1)
from(x1)  =  from
cons(x1, x2)  =  cons
s(x1)  =  s
length(x1)  =  length
nil  =  nil
0  =  0
length1(x1)  =  length1

Lexicographic path order with status [LPO].
Precedence:
from > cons > length1 > length > mark1 > nil > 0 > s

Status:
mark1: [1]
from: []
cons: []
s: []
length: []
nil: []
0: []
length1: []

The following usable rules [FROCOS05] were oriented:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

(37) Obligation:

Q DP problem:
The TRS P consists of the following rules:

FROM(active(X)) → FROM(X)

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(38) QDPOrderProof (EQUIVALENT transformation)

We use the reduction pair processor [LPAR04].


The following pairs can be oriented strictly and are deleted.


FROM(active(X)) → FROM(X)
The remaining pairs can at least be oriented weakly.
Used ordering: Combined order from the following AFS and order.
FROM(x1)  =  x1
active(x1)  =  active(x1)
from(x1)  =  from
mark(x1)  =  mark(x1)
cons(x1, x2)  =  cons
s(x1)  =  s
length(x1)  =  length(x1)
nil  =  nil
0  =  0
length1(x1)  =  length1(x1)

Lexicographic path order with status [LPO].
Precedence:
from > mark1 > active1 > 0 > s
from > mark1 > nil > 0 > s
from > cons > active1 > 0 > s
length11 > length1 > mark1 > active1 > 0 > s
length11 > length1 > mark1 > nil > 0 > s

Status:
active1: [1]
from: []
mark1: [1]
cons: []
s: []
length1: [1]
nil: []
0: []
length11: [1]

The following usable rules [FROCOS05] were oriented:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

(39) Obligation:

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

(40) PisEmptyProof (EQUIVALENT transformation)

The TRS P is empty. Hence, there is no (P,Q,R) chain.

(41) TRUE

(42) Obligation:

Q DP problem:
The TRS P consists of the following rules:

MARK(from(X)) → ACTIVE(from(mark(X)))
ACTIVE(from(X)) → MARK(cons(X, from(s(X))))
MARK(from(X)) → MARK(X)
MARK(cons(X1, X2)) → ACTIVE(cons(mark(X1), X2))
ACTIVE(length(cons(X, Y))) → MARK(s(length1(Y)))
MARK(cons(X1, X2)) → MARK(X1)
MARK(s(X)) → ACTIVE(s(mark(X)))
ACTIVE(length1(X)) → MARK(length(X))
MARK(s(X)) → MARK(X)
MARK(length(X)) → ACTIVE(length(X))
MARK(length1(X)) → ACTIVE(length1(X))

The TRS R consists of the following rules:

active(from(X)) → mark(cons(X, from(s(X))))
active(length(nil)) → mark(0)
active(length(cons(X, Y))) → mark(s(length1(Y)))
active(length1(X)) → mark(length(X))
mark(from(X)) → active(from(mark(X)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(X))
mark(nil) → active(nil)
mark(0) → active(0)
mark(length1(X)) → active(length1(X))
from(mark(X)) → from(X)
from(active(X)) → from(X)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
length1(mark(X)) → length1(X)
length1(active(X)) → length1(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.