Termination w.r.t. Q of the following Term Rewriting System could not be shown:

Q restricted rewrite system:
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.


↳ QTRS
  ↳ DependencyPairsProof

Q restricted rewrite system:
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.

Using Dependency Pairs [1,15] we result in the following initial DP problem:
Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → MARK(X1)
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
U311(X1, X2, active(X3), X4) → U311(X1, X2, X3, X4)
CONS(X1, mark(X2)) → CONS(X1, X2)
U311(X1, X2, X3, active(X4)) → U311(X1, X2, X3, X4)
ACTIVE(length(cons(N, L))) → AND(isNatList(L), isNat(N))
U111(X1, mark(X2)) → U111(X1, X2)
ACTIVE(isNatIList(zeros)) → MARK(tt)
MARK(length(X)) → MARK(X)
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(take(s(M), cons(N, IL))) → ISNAT(N)
MARK(take(X1, X2)) → TAKE(mark(X1), mark(X2))
U111(X1, active(X2)) → U111(X1, X2)
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
TAKE(active(X1), X2) → TAKE(X1, X2)
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(take(s(M), cons(N, IL))) → AND(isNat(M), isNat(N))
ISNATILIST(mark(X)) → ISNATILIST(X)
ACTIVE(and(tt, X)) → MARK(X)
MARK(take(X1, X2)) → MARK(X2)
CONS(mark(X1), X2) → CONS(X1, X2)
MARK(s(X)) → MARK(X)
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(U31(tt, IL, M, N)) → TAKE(M, IL)
MARK(U11(X1, X2)) → U111(mark(X1), X2)
ACTIVE(isNat(0)) → MARK(tt)
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
CONS(X1, active(X2)) → CONS(X1, X2)
ACTIVE(take(s(M), cons(N, IL))) → U311(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N)
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(U31(X1, X2, X3, X4)) → ACTIVE(U31(mark(X1), X2, X3, X4))
MARK(and(X1, X2)) → MARK(X1)
LENGTH(mark(X)) → LENGTH(X)
U311(X1, X2, X3, mark(X4)) → U311(X1, X2, X3, X4)
LENGTH(active(X)) → LENGTH(X)
ACTIVE(isNatList(take(V1, V2))) → ISNATILIST(V2)
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
U111(active(X1), X2) → U111(X1, X2)
S(mark(X)) → S(X)
MARK(cons(X1, X2)) → ACTIVE(cons(mark(X1), X2))
ISNAT(mark(X)) → ISNAT(X)
U211(active(X)) → U211(X)
ACTIVE(length(nil)) → MARK(0)
ACTIVE(isNatList(cons(V1, V2))) → ISNATLIST(V2)
ACTIVE(isNat(s(V1))) → ISNAT(V1)
ACTIVE(isNatList(nil)) → MARK(tt)
AND(mark(X1), X2) → AND(X1, X2)
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
U311(active(X1), X2, X3, X4) → U311(X1, X2, X3, X4)
MARK(tt) → ACTIVE(tt)
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(isNat(X)) → ACTIVE(isNat(X))
TAKE(X1, active(X2)) → TAKE(X1, X2)
U311(X1, active(X2), X3, X4) → U311(X1, X2, X3, X4)
MARK(cons(X1, X2)) → MARK(X1)
MARK(U21(X)) → U211(mark(X))
MARK(U31(X1, X2, X3, X4)) → U311(mark(X1), X2, X3, X4)
AND(X1, mark(X2)) → AND(X1, X2)
ACTIVE(take(0, IL)) → U211(isNatIList(IL))
ACTIVE(isNatList(take(V1, V2))) → AND(isNat(V1), isNatIList(V2))
ACTIVE(U21(tt)) → MARK(nil)
ACTIVE(isNatIList(V)) → ISNATLIST(V)
ACTIVE(zeros) → CONS(0, zeros)
ACTIVE(take(0, IL)) → MARK(U21(isNatIList(IL)))
ACTIVE(isNatList(take(V1, V2))) → ISNAT(V1)
MARK(take(X1, X2)) → MARK(X1)
MARK(U31(X1, X2, X3, X4)) → MARK(X1)
ACTIVE(isNatIList(cons(V1, V2))) → ISNAT(V1)
MARK(isNatList(X)) → ACTIVE(isNatList(X))
ACTIVE(take(s(M), cons(N, IL))) → MARK(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
S(active(X)) → S(X)
MARK(cons(X1, X2)) → CONS(mark(X1), X2)
ACTIVE(isNatIList(cons(V1, V2))) → ISNATILIST(V2)
U211(mark(X)) → U211(X)
MARK(length(X)) → ACTIVE(length(mark(X)))
ACTIVE(isNatList(cons(V1, V2))) → ISNAT(V1)
AND(X1, active(X2)) → AND(X1, X2)
ACTIVE(isNatIList(cons(V1, V2))) → AND(isNat(V1), isNatIList(V2))
ACTIVE(take(0, IL)) → ISNATILIST(IL)
ACTIVE(U11(tt, L)) → S(length(L))
MARK(zeros) → ACTIVE(zeros)
MARK(length(X)) → LENGTH(mark(X))
U311(X1, mark(X2), X3, X4) → U311(X1, X2, X3, X4)
TAKE(mark(X1), X2) → TAKE(X1, X2)
AND(active(X1), X2) → AND(X1, X2)
CONS(active(X1), X2) → CONS(X1, X2)
ISNATLIST(active(X)) → ISNATLIST(X)
U111(mark(X1), X2) → U111(X1, X2)
ACTIVE(take(s(M), cons(N, IL))) → AND(isNatIList(IL), and(isNat(M), isNat(N)))
U311(X1, X2, mark(X3), X4) → U311(X1, X2, X3, X4)
ISNATLIST(mark(X)) → ISNATLIST(X)
ACTIVE(isNat(length(V1))) → ISNATLIST(V1)
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(take(s(M), cons(N, IL))) → ISNATILIST(IL)
MARK(take(X1, X2)) → ACTIVE(take(mark(X1), mark(X2)))
MARK(s(X)) → S(mark(X))
MARK(and(X1, X2)) → AND(mark(X1), X2)
ACTIVE(take(s(M), cons(N, IL))) → ISNAT(M)
ACTIVE(length(cons(N, L))) → ISNATLIST(L)
ACTIVE(U31(tt, IL, M, N)) → CONS(N, take(M, IL))
ISNAT(active(X)) → ISNAT(X)
ACTIVE(isNatList(cons(V1, V2))) → AND(isNat(V1), isNatList(V2))
MARK(U21(X)) → MARK(X)
ACTIVE(U11(tt, L)) → LENGTH(L)
TAKE(X1, mark(X2)) → TAKE(X1, X2)
ACTIVE(U31(tt, IL, M, N)) → MARK(cons(N, take(M, IL)))
ACTIVE(length(cons(N, L))) → ISNAT(N)
ACTIVE(length(cons(N, L))) → U111(and(isNatList(L), isNat(N)), L)
ACTIVE(zeros) → MARK(cons(0, zeros))
MARK(0) → ACTIVE(0)
ISNATILIST(active(X)) → ISNATILIST(X)
MARK(nil) → ACTIVE(nil)
U311(mark(X1), X2, X3, X4) → U311(X1, X2, X3, X4)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → MARK(X1)
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
U311(X1, X2, active(X3), X4) → U311(X1, X2, X3, X4)
CONS(X1, mark(X2)) → CONS(X1, X2)
U311(X1, X2, X3, active(X4)) → U311(X1, X2, X3, X4)
ACTIVE(length(cons(N, L))) → AND(isNatList(L), isNat(N))
U111(X1, mark(X2)) → U111(X1, X2)
ACTIVE(isNatIList(zeros)) → MARK(tt)
MARK(length(X)) → MARK(X)
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(take(s(M), cons(N, IL))) → ISNAT(N)
MARK(take(X1, X2)) → TAKE(mark(X1), mark(X2))
U111(X1, active(X2)) → U111(X1, X2)
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
TAKE(active(X1), X2) → TAKE(X1, X2)
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(take(s(M), cons(N, IL))) → AND(isNat(M), isNat(N))
ISNATILIST(mark(X)) → ISNATILIST(X)
ACTIVE(and(tt, X)) → MARK(X)
MARK(take(X1, X2)) → MARK(X2)
CONS(mark(X1), X2) → CONS(X1, X2)
MARK(s(X)) → MARK(X)
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(U31(tt, IL, M, N)) → TAKE(M, IL)
MARK(U11(X1, X2)) → U111(mark(X1), X2)
ACTIVE(isNat(0)) → MARK(tt)
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
CONS(X1, active(X2)) → CONS(X1, X2)
ACTIVE(take(s(M), cons(N, IL))) → U311(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N)
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(U31(X1, X2, X3, X4)) → ACTIVE(U31(mark(X1), X2, X3, X4))
MARK(and(X1, X2)) → MARK(X1)
LENGTH(mark(X)) → LENGTH(X)
U311(X1, X2, X3, mark(X4)) → U311(X1, X2, X3, X4)
LENGTH(active(X)) → LENGTH(X)
ACTIVE(isNatList(take(V1, V2))) → ISNATILIST(V2)
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
U111(active(X1), X2) → U111(X1, X2)
S(mark(X)) → S(X)
MARK(cons(X1, X2)) → ACTIVE(cons(mark(X1), X2))
ISNAT(mark(X)) → ISNAT(X)
U211(active(X)) → U211(X)
ACTIVE(length(nil)) → MARK(0)
ACTIVE(isNatList(cons(V1, V2))) → ISNATLIST(V2)
ACTIVE(isNat(s(V1))) → ISNAT(V1)
ACTIVE(isNatList(nil)) → MARK(tt)
AND(mark(X1), X2) → AND(X1, X2)
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
U311(active(X1), X2, X3, X4) → U311(X1, X2, X3, X4)
MARK(tt) → ACTIVE(tt)
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(isNat(X)) → ACTIVE(isNat(X))
TAKE(X1, active(X2)) → TAKE(X1, X2)
U311(X1, active(X2), X3, X4) → U311(X1, X2, X3, X4)
MARK(cons(X1, X2)) → MARK(X1)
MARK(U21(X)) → U211(mark(X))
MARK(U31(X1, X2, X3, X4)) → U311(mark(X1), X2, X3, X4)
AND(X1, mark(X2)) → AND(X1, X2)
ACTIVE(take(0, IL)) → U211(isNatIList(IL))
ACTIVE(isNatList(take(V1, V2))) → AND(isNat(V1), isNatIList(V2))
ACTIVE(U21(tt)) → MARK(nil)
ACTIVE(isNatIList(V)) → ISNATLIST(V)
ACTIVE(zeros) → CONS(0, zeros)
ACTIVE(take(0, IL)) → MARK(U21(isNatIList(IL)))
ACTIVE(isNatList(take(V1, V2))) → ISNAT(V1)
MARK(take(X1, X2)) → MARK(X1)
MARK(U31(X1, X2, X3, X4)) → MARK(X1)
ACTIVE(isNatIList(cons(V1, V2))) → ISNAT(V1)
MARK(isNatList(X)) → ACTIVE(isNatList(X))
ACTIVE(take(s(M), cons(N, IL))) → MARK(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
S(active(X)) → S(X)
MARK(cons(X1, X2)) → CONS(mark(X1), X2)
ACTIVE(isNatIList(cons(V1, V2))) → ISNATILIST(V2)
U211(mark(X)) → U211(X)
MARK(length(X)) → ACTIVE(length(mark(X)))
ACTIVE(isNatList(cons(V1, V2))) → ISNAT(V1)
AND(X1, active(X2)) → AND(X1, X2)
ACTIVE(isNatIList(cons(V1, V2))) → AND(isNat(V1), isNatIList(V2))
ACTIVE(take(0, IL)) → ISNATILIST(IL)
ACTIVE(U11(tt, L)) → S(length(L))
MARK(zeros) → ACTIVE(zeros)
MARK(length(X)) → LENGTH(mark(X))
U311(X1, mark(X2), X3, X4) → U311(X1, X2, X3, X4)
TAKE(mark(X1), X2) → TAKE(X1, X2)
AND(active(X1), X2) → AND(X1, X2)
CONS(active(X1), X2) → CONS(X1, X2)
ISNATLIST(active(X)) → ISNATLIST(X)
U111(mark(X1), X2) → U111(X1, X2)
ACTIVE(take(s(M), cons(N, IL))) → AND(isNatIList(IL), and(isNat(M), isNat(N)))
U311(X1, X2, mark(X3), X4) → U311(X1, X2, X3, X4)
ISNATLIST(mark(X)) → ISNATLIST(X)
ACTIVE(isNat(length(V1))) → ISNATLIST(V1)
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(take(s(M), cons(N, IL))) → ISNATILIST(IL)
MARK(take(X1, X2)) → ACTIVE(take(mark(X1), mark(X2)))
MARK(s(X)) → S(mark(X))
MARK(and(X1, X2)) → AND(mark(X1), X2)
ACTIVE(take(s(M), cons(N, IL))) → ISNAT(M)
ACTIVE(length(cons(N, L))) → ISNATLIST(L)
ACTIVE(U31(tt, IL, M, N)) → CONS(N, take(M, IL))
ISNAT(active(X)) → ISNAT(X)
ACTIVE(isNatList(cons(V1, V2))) → AND(isNat(V1), isNatList(V2))
MARK(U21(X)) → MARK(X)
ACTIVE(U11(tt, L)) → LENGTH(L)
TAKE(X1, mark(X2)) → TAKE(X1, X2)
ACTIVE(U31(tt, IL, M, N)) → MARK(cons(N, take(M, IL)))
ACTIVE(length(cons(N, L))) → ISNAT(N)
ACTIVE(length(cons(N, L))) → U111(and(isNatList(L), isNat(N)), L)
ACTIVE(zeros) → MARK(cons(0, zeros))
MARK(0) → ACTIVE(0)
ISNATILIST(active(X)) → ISNATILIST(X)
MARK(nil) → ACTIVE(nil)
U311(mark(X1), X2, X3, X4) → U311(X1, X2, X3, X4)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The approximation of the Dependency Graph [15,17,22] contains 12 SCCs with 45 less nodes.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ISNATILIST(mark(X)) → ISNATILIST(X)
ISNATILIST(active(X)) → ISNATILIST(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


ISNATILIST(mark(X)) → ISNATILIST(X)
ISNATILIST(active(X)) → ISNATILIST(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(active(x1)) = 4 + x_1   
POL(ISNATILIST(x1)) = (4)x_1   
POL(mark(x1)) = 4 + (4)x_1   
The value of delta used in the strict ordering is 16.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ISNATLIST(mark(X)) → ISNATLIST(X)
ISNATLIST(active(X)) → ISNATLIST(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


ISNATLIST(mark(X)) → ISNATLIST(X)
ISNATLIST(active(X)) → ISNATLIST(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(ISNATLIST(x1)) = (4)x_1   
POL(active(x1)) = 4 + (4)x_1   
POL(mark(x1)) = 4 + x_1   
The value of delta used in the strict ordering is 16.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ISNAT(active(X)) → ISNAT(X)
ISNAT(mark(X)) → ISNAT(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


ISNAT(active(X)) → ISNAT(X)
ISNAT(mark(X)) → ISNAT(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(active(x1)) = 4 + x_1   
POL(mark(x1)) = 4 + (4)x_1   
POL(ISNAT(x1)) = (4)x_1   
The value of delta used in the strict ordering is 16.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

AND(mark(X1), X2) → AND(X1, X2)
AND(active(X1), X2) → AND(X1, X2)
AND(X1, mark(X2)) → AND(X1, X2)
AND(X1, active(X2)) → AND(X1, X2)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


AND(mark(X1), X2) → AND(X1, X2)
AND(active(X1), X2) → AND(X1, X2)
AND(X1, mark(X2)) → AND(X1, X2)
AND(X1, active(X2)) → AND(X1, X2)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(active(x1)) = 3 + (3)x_1   
POL(AND(x1, x2)) = x_1 + (4)x_2   
POL(mark(x1)) = 1 + (4)x_1   
The value of delta used in the strict ordering is 1.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

TAKE(X1, active(X2)) → TAKE(X1, X2)
TAKE(active(X1), X2) → TAKE(X1, X2)
TAKE(mark(X1), X2) → TAKE(X1, X2)
TAKE(X1, mark(X2)) → TAKE(X1, X2)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


TAKE(X1, active(X2)) → TAKE(X1, X2)
TAKE(active(X1), X2) → TAKE(X1, X2)
TAKE(mark(X1), X2) → TAKE(X1, X2)
TAKE(X1, mark(X2)) → TAKE(X1, X2)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(TAKE(x1, x2)) = x_1 + (4)x_2   
POL(active(x1)) = 1 + (4)x_1   
POL(mark(x1)) = 3 + (4)x_1   
The value of delta used in the strict ordering is 1.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U311(active(X1), X2, X3, X4) → U311(X1, X2, X3, X4)
U311(X1, X2, mark(X3), X4) → U311(X1, X2, X3, X4)
U311(X1, mark(X2), X3, X4) → U311(X1, X2, X3, X4)
U311(X1, active(X2), X3, X4) → U311(X1, X2, X3, X4)
U311(X1, X2, active(X3), X4) → U311(X1, X2, X3, X4)
U311(X1, X2, X3, mark(X4)) → U311(X1, X2, X3, X4)
U311(X1, X2, X3, active(X4)) → U311(X1, X2, X3, X4)
U311(mark(X1), X2, X3, X4) → U311(X1, X2, X3, X4)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


U311(active(X1), X2, X3, X4) → U311(X1, X2, X3, X4)
U311(X1, X2, mark(X3), X4) → U311(X1, X2, X3, X4)
U311(X1, mark(X2), X3, X4) → U311(X1, X2, X3, X4)
U311(X1, active(X2), X3, X4) → U311(X1, X2, X3, X4)
U311(X1, X2, active(X3), X4) → U311(X1, X2, X3, X4)
U311(X1, X2, X3, mark(X4)) → U311(X1, X2, X3, X4)
U311(X1, X2, X3, active(X4)) → U311(X1, X2, X3, X4)
U311(mark(X1), X2, X3, X4) → U311(X1, X2, X3, X4)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(active(x1)) = 3 + (2)x_1   
POL(mark(x1)) = 1 + (4)x_1   
POL(U311(x1, x2, x3, x4)) = (4)x_1 + x_2 + (3)x_3 + x_4   
The value of delta used in the strict ordering is 1.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U211(mark(X)) → U211(X)
U211(active(X)) → U211(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


U211(mark(X)) → U211(X)
U211(active(X)) → U211(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(active(x1)) = 4 + (4)x_1   
POL(U211(x1)) = (4)x_1   
POL(mark(x1)) = 4 + x_1   
The value of delta used in the strict ordering is 16.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

LENGTH(mark(X)) → LENGTH(X)
LENGTH(active(X)) → LENGTH(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


LENGTH(mark(X)) → LENGTH(X)
LENGTH(active(X)) → LENGTH(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(LENGTH(x1)) = (4)x_1   
POL(active(x1)) = 4 + x_1   
POL(mark(x1)) = 4 + (4)x_1   
The value of delta used in the strict ordering is 16.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

S(mark(X)) → S(X)
S(active(X)) → S(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


S(mark(X)) → S(X)
S(active(X)) → S(X)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(active(x1)) = 4 + x_1   
POL(mark(x1)) = 4 + (4)x_1   
POL(S(x1)) = (4)x_1   
The value of delta used in the strict ordering is 16.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U111(X1, mark(X2)) → U111(X1, X2)
U111(X1, active(X2)) → U111(X1, X2)
U111(active(X1), X2) → U111(X1, X2)
U111(mark(X1), X2) → U111(X1, X2)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


U111(X1, mark(X2)) → U111(X1, X2)
U111(X1, active(X2)) → U111(X1, X2)
U111(active(X1), X2) → U111(X1, X2)
U111(mark(X1), X2) → U111(X1, X2)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(active(x1)) = 1 + (4)x_1   
POL(U111(x1, x2)) = (2)x_1 + x_2   
POL(mark(x1)) = 1 + (2)x_1   
The value of delta used in the strict ordering is 1.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

CONS(X1, active(X2)) → CONS(X1, X2)
CONS(mark(X1), X2) → CONS(X1, X2)
CONS(active(X1), X2) → CONS(X1, X2)
CONS(X1, mark(X2)) → CONS(X1, X2)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


CONS(X1, active(X2)) → CONS(X1, X2)
CONS(mark(X1), X2) → CONS(X1, X2)
CONS(active(X1), X2) → CONS(X1, X2)
CONS(X1, mark(X2)) → CONS(X1, X2)
The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial interpretation [25,35]:

POL(active(x1)) = 4 + (2)x_1   
POL(CONS(x1, x2)) = (4)x_1 + (4)x_2   
POL(mark(x1)) = 4 + (2)x_1   
The value of delta used in the strict ordering is 16.
The following usable rules [17] were oriented: none



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ PisEmptyProof
          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(take(X1, X2)) → MARK(X2)
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U11(X1, X2)) → MARK(X1)
MARK(s(X)) → MARK(X)
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
MARK(cons(X1, X2)) → MARK(X1)
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(length(X)) → MARK(X)
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(U31(X1, X2, X3, X4)) → ACTIVE(U31(mark(X1), X2, X3, X4))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(take(0, IL)) → MARK(U21(isNatIList(IL)))
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
MARK(take(X1, X2)) → MARK(X1)
MARK(U31(X1, X2, X3, X4)) → MARK(X1)
MARK(isNatList(X)) → ACTIVE(isNatList(X))
MARK(take(X1, X2)) → ACTIVE(take(mark(X1), mark(X2)))
ACTIVE(take(s(M), cons(N, IL))) → MARK(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(cons(X1, X2)) → ACTIVE(cons(mark(X1), X2))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(U21(X)) → MARK(X)
ACTIVE(U31(tt, IL, M, N)) → MARK(cons(N, take(M, IL)))
MARK(zeros) → ACTIVE(zeros)
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
ACTIVE(zeros) → MARK(cons(0, zeros))
ACTIVE(and(tt, X)) → MARK(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(cons(X1, X2)) → ACTIVE(cons(mark(X1), X2))
The remaining pairs can at least be oriented weakly.

MARK(take(X1, X2)) → MARK(X2)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U11(X1, X2)) → MARK(X1)
MARK(s(X)) → MARK(X)
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
MARK(cons(X1, X2)) → MARK(X1)
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(length(X)) → MARK(X)
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
MARK(U31(X1, X2, X3, X4)) → ACTIVE(U31(mark(X1), X2, X3, X4))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(take(0, IL)) → MARK(U21(isNatIList(IL)))
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
MARK(take(X1, X2)) → MARK(X1)
MARK(U31(X1, X2, X3, X4)) → MARK(X1)
MARK(isNatList(X)) → ACTIVE(isNatList(X))
MARK(take(X1, X2)) → ACTIVE(take(mark(X1), mark(X2)))
ACTIVE(take(s(M), cons(N, IL))) → MARK(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(U21(X)) → MARK(X)
ACTIVE(U31(tt, IL, M, N)) → MARK(cons(N, take(M, IL)))
MARK(zeros) → ACTIVE(zeros)
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
ACTIVE(zeros) → MARK(cons(0, zeros))
ACTIVE(and(tt, X)) → MARK(X)
Used ordering: Polynomial interpretation [25,35]:

POL(U31(x1, x2, x3, x4)) = 1   
POL(mark(x1)) = 4   
POL(and(x1, x2)) = 1   
POL(U11(x1, x2)) = 1   
POL(take(x1, x2)) = 1   
POL(0) = 0   
POL(ACTIVE(x1)) = x_1   
POL(active(x1)) = 2   
POL(cons(x1, x2)) = 0   
POL(MARK(x1)) = 1   
POL(tt) = 1   
POL(isNatList(x1)) = 1   
POL(zeros) = 1   
POL(isNatIList(x1)) = 1   
POL(s(x1)) = 0   
POL(length(x1)) = 1   
POL(isNat(x1)) = 1   
POL(nil) = 3   
POL(U21(x1)) = 0   
The value of delta used in the strict ordering is 1.
The following usable rules [17] were oriented:

U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
cons(X1, active(X2)) → cons(X1, X2)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(mark(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
length(active(X)) → length(X)
length(mark(X)) → length(X)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)
and(X1, mark(X2)) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
isNatList(active(X)) → isNatList(X)
isNatList(mark(X)) → isNatList(X)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(take(X1, X2)) → MARK(X2)
MARK(U11(X1, X2)) → MARK(X1)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
MARK(cons(X1, X2)) → MARK(X1)
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
MARK(length(X)) → MARK(X)
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
MARK(U31(X1, X2, X3, X4)) → ACTIVE(U31(mark(X1), X2, X3, X4))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(take(0, IL)) → MARK(U21(isNatIList(IL)))
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
MARK(take(X1, X2)) → MARK(X1)
MARK(U31(X1, X2, X3, X4)) → MARK(X1)
MARK(isNatList(X)) → ACTIVE(isNatList(X))
MARK(take(X1, X2)) → ACTIVE(take(mark(X1), mark(X2)))
ACTIVE(take(s(M), cons(N, IL))) → MARK(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(U21(X)) → MARK(X)
ACTIVE(U31(tt, IL, M, N)) → MARK(cons(N, take(M, IL)))
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(zeros) → ACTIVE(zeros)
ACTIVE(zeros) → MARK(cons(0, zeros))
ACTIVE(and(tt, X)) → MARK(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


MARK(take(X1, X2)) → MARK(X2)
ACTIVE(take(0, IL)) → MARK(U21(isNatIList(IL)))
MARK(take(X1, X2)) → MARK(X1)
MARK(U31(X1, X2, X3, X4)) → MARK(X1)
The remaining pairs can at least be oriented weakly.

MARK(U11(X1, X2)) → MARK(X1)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
MARK(cons(X1, X2)) → MARK(X1)
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
MARK(length(X)) → MARK(X)
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
MARK(U31(X1, X2, X3, X4)) → ACTIVE(U31(mark(X1), X2, X3, X4))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
MARK(isNatList(X)) → ACTIVE(isNatList(X))
MARK(take(X1, X2)) → ACTIVE(take(mark(X1), mark(X2)))
ACTIVE(take(s(M), cons(N, IL))) → MARK(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(U21(X)) → MARK(X)
ACTIVE(U31(tt, IL, M, N)) → MARK(cons(N, take(M, IL)))
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(zeros) → ACTIVE(zeros)
ACTIVE(zeros) → MARK(cons(0, zeros))
ACTIVE(and(tt, X)) → MARK(X)
Used ordering: Polynomial interpretation [25,35]:

POL(U31(x1, x2, x3, x4)) = 2 + x_1 + x_2 + (4)x_3 + x_4   
POL(mark(x1)) = x_1   
POL(U11(x1, x2)) = (4)x_1 + (2)x_2   
POL(and(x1, x2)) = (4)x_1 + (2)x_2   
POL(take(x1, x2)) = 2 + (4)x_1 + x_2   
POL(0) = 0   
POL(ACTIVE(x1)) = (2)x_1   
POL(active(x1)) = x_1   
POL(cons(x1, x2)) = x_1 + x_2   
POL(MARK(x1)) = (2)x_1   
POL(tt) = 0   
POL(isNatList(x1)) = 0   
POL(zeros) = 0   
POL(isNatIList(x1)) = 0   
POL(s(x1)) = x_1   
POL(length(x1)) = (2)x_1   
POL(isNat(x1)) = 0   
POL(nil) = 0   
POL(U21(x1)) = (4)x_1   
The value of delta used in the strict ordering is 4.
The following usable rules [17] were oriented:

mark(0) → active(0)
mark(tt) → active(tt)
mark(nil) → active(nil)
active(length(nil)) → mark(0)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
mark(zeros) → active(zeros)
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
active(zeros) → mark(cons(0, zeros))
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNatList(X)) → active(isNatList(X))
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
active(U11(tt, L)) → mark(s(length(L)))
mark(isNat(X)) → active(isNat(X))
mark(isNatIList(X)) → active(isNatIList(X))
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
active(isNatIList(V)) → mark(isNatList(V))
active(isNat(length(V1))) → mark(isNatList(V1))
active(and(tt, X)) → mark(X)
mark(length(X)) → active(length(mark(X)))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(U21(X)) → active(U21(mark(X)))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(isNat(s(V1))) → mark(isNat(V1))
mark(s(X)) → active(s(mark(X)))
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
cons(X1, active(X2)) → cons(X1, X2)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(mark(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
length(active(X)) → length(X)
length(mark(X)) → length(X)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
active(U21(tt)) → mark(nil)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)
active(isNatList(nil)) → mark(tt)
active(isNatIList(zeros)) → mark(tt)
and(X1, mark(X2)) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
isNatList(active(X)) → isNatList(X)
isNatList(mark(X)) → isNatList(X)
active(isNat(0)) → mark(tt)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U11(X1, X2)) → MARK(X1)
MARK(s(X)) → MARK(X)
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
MARK(cons(X1, X2)) → MARK(X1)
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(length(X)) → MARK(X)
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
MARK(U31(X1, X2, X3, X4)) → ACTIVE(U31(mark(X1), X2, X3, X4))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
MARK(isNatList(X)) → ACTIVE(isNatList(X))
MARK(take(X1, X2)) → ACTIVE(take(mark(X1), mark(X2)))
ACTIVE(take(s(M), cons(N, IL))) → MARK(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(U21(X)) → MARK(X)
ACTIVE(U31(tt, IL, M, N)) → MARK(cons(N, take(M, IL)))
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(zeros) → ACTIVE(zeros)
ACTIVE(zeros) → MARK(cons(0, zeros))
ACTIVE(and(tt, X)) → MARK(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


MARK(U11(X1, X2)) → MARK(X1)
MARK(length(X)) → MARK(X)
The remaining pairs can at least be oriented weakly.

MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
MARK(cons(X1, X2)) → MARK(X1)
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
MARK(U31(X1, X2, X3, X4)) → ACTIVE(U31(mark(X1), X2, X3, X4))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
MARK(isNatList(X)) → ACTIVE(isNatList(X))
MARK(take(X1, X2)) → ACTIVE(take(mark(X1), mark(X2)))
ACTIVE(take(s(M), cons(N, IL))) → MARK(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(U21(X)) → MARK(X)
ACTIVE(U31(tt, IL, M, N)) → MARK(cons(N, take(M, IL)))
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(zeros) → ACTIVE(zeros)
ACTIVE(zeros) → MARK(cons(0, zeros))
ACTIVE(and(tt, X)) → MARK(X)
Used ordering: Polynomial interpretation [25,35]:

POL(U31(x1, x2, x3, x4)) = (4)x_2 + (3)x_4   
POL(mark(x1)) = x_1   
POL(U11(x1, x2)) = 1 + x_1 + (4)x_2   
POL(and(x1, x2)) = (2)x_1 + (4)x_2   
POL(take(x1, x2)) = (2)x_2   
POL(0) = 0   
POL(ACTIVE(x1)) = x_1   
POL(active(x1)) = x_1   
POL(cons(x1, x2)) = (2)x_1 + (2)x_2   
POL(MARK(x1)) = x_1   
POL(tt) = 0   
POL(isNatList(x1)) = 0   
POL(zeros) = 0   
POL(isNatIList(x1)) = 0   
POL(s(x1)) = x_1   
POL(length(x1)) = 1 + (4)x_1   
POL(isNat(x1)) = 0   
POL(nil) = 0   
POL(U21(x1)) = x_1   
The value of delta used in the strict ordering is 1.
The following usable rules [17] were oriented:

mark(0) → active(0)
mark(tt) → active(tt)
mark(nil) → active(nil)
active(length(nil)) → mark(0)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
mark(zeros) → active(zeros)
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
active(zeros) → mark(cons(0, zeros))
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNatList(X)) → active(isNatList(X))
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
active(U11(tt, L)) → mark(s(length(L)))
mark(isNat(X)) → active(isNat(X))
mark(isNatIList(X)) → active(isNatIList(X))
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
active(isNatIList(V)) → mark(isNatList(V))
active(isNat(length(V1))) → mark(isNatList(V1))
active(and(tt, X)) → mark(X)
mark(length(X)) → active(length(mark(X)))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(U21(X)) → active(U21(mark(X)))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(isNat(s(V1))) → mark(isNat(V1))
mark(s(X)) → active(s(mark(X)))
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
cons(X1, active(X2)) → cons(X1, X2)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(mark(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
length(active(X)) → length(X)
length(mark(X)) → length(X)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
active(U21(tt)) → mark(nil)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)
active(isNatList(nil)) → mark(tt)
active(isNatIList(zeros)) → mark(tt)
and(X1, mark(X2)) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
isNatList(active(X)) → isNatList(X)
isNatList(mark(X)) → isNatList(X)
active(isNat(0)) → mark(tt)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
MARK(cons(X1, X2)) → MARK(X1)
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
MARK(U31(X1, X2, X3, X4)) → ACTIVE(U31(mark(X1), X2, X3, X4))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
MARK(isNatList(X)) → ACTIVE(isNatList(X))
MARK(take(X1, X2)) → ACTIVE(take(mark(X1), mark(X2)))
ACTIVE(take(s(M), cons(N, IL))) → MARK(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(U21(X)) → MARK(X)
ACTIVE(U31(tt, IL, M, N)) → MARK(cons(N, take(M, IL)))
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(zeros) → ACTIVE(zeros)
ACTIVE(zeros) → MARK(cons(0, zeros))
ACTIVE(and(tt, X)) → MARK(X)

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


ACTIVE(take(s(M), cons(N, IL))) → MARK(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
The remaining pairs can at least be oriented weakly.

MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
MARK(cons(X1, X2)) → MARK(X1)
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
MARK(U31(X1, X2, X3, X4)) → ACTIVE(U31(mark(X1), X2, X3, X4))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
MARK(isNatList(X)) → ACTIVE(isNatList(X))
MARK(take(X1, X2)) → ACTIVE(take(mark(X1), mark(X2)))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(U21(X)) → MARK(X)
ACTIVE(U31(tt, IL, M, N)) → MARK(cons(N, take(M, IL)))
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(zeros) → ACTIVE(zeros)
ACTIVE(zeros) → MARK(cons(0, zeros))
ACTIVE(and(tt, X)) → MARK(X)
Used ordering: Polynomial interpretation [25,35]:

POL(U31(x1, x2, x3, x4)) = (4)x_4   
POL(mark(x1)) = x_1   
POL(U11(x1, x2)) = 0   
POL(and(x1, x2)) = (2)x_1 + (4)x_2   
POL(take(x1, x2)) = 1 + x_2   
POL(0) = 0   
POL(ACTIVE(x1)) = (4)x_1   
POL(active(x1)) = x_1   
POL(cons(x1, x2)) = (4)x_1   
POL(MARK(x1)) = (4)x_1   
POL(tt) = 0   
POL(isNatList(x1)) = 0   
POL(zeros) = 0   
POL(isNatIList(x1)) = 0   
POL(s(x1)) = (4)x_1   
POL(length(x1)) = 0   
POL(isNat(x1)) = 0   
POL(nil) = 0   
POL(U21(x1)) = (4)x_1   
The value of delta used in the strict ordering is 4.
The following usable rules [17] were oriented:

mark(0) → active(0)
mark(tt) → active(tt)
mark(nil) → active(nil)
active(length(nil)) → mark(0)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
mark(zeros) → active(zeros)
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
active(zeros) → mark(cons(0, zeros))
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNatList(X)) → active(isNatList(X))
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
active(U11(tt, L)) → mark(s(length(L)))
mark(isNat(X)) → active(isNat(X))
mark(isNatIList(X)) → active(isNatIList(X))
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
active(isNatIList(V)) → mark(isNatList(V))
active(isNat(length(V1))) → mark(isNatList(V1))
active(and(tt, X)) → mark(X)
mark(length(X)) → active(length(mark(X)))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(U21(X)) → active(U21(mark(X)))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(isNat(s(V1))) → mark(isNat(V1))
mark(s(X)) → active(s(mark(X)))
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
cons(X1, active(X2)) → cons(X1, X2)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(mark(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
length(active(X)) → length(X)
length(mark(X)) → length(X)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
active(U21(tt)) → mark(nil)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)
active(isNatList(nil)) → mark(tt)
active(isNatIList(zeros)) → mark(tt)
and(X1, mark(X2)) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
isNatList(active(X)) → isNatList(X)
isNatList(mark(X)) → isNatList(X)
active(isNat(0)) → mark(tt)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(cons(X1, X2)) → MARK(X1)
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(U21(X)) → MARK(X)
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(U31(tt, IL, M, N)) → MARK(cons(N, take(M, IL)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
MARK(zeros) → ACTIVE(zeros)
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(U31(X1, X2, X3, X4)) → ACTIVE(U31(mark(X1), X2, X3, X4))
ACTIVE(zeros) → MARK(cons(0, zeros))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(and(tt, X)) → MARK(X)
MARK(isNatList(X)) → ACTIVE(isNatList(X))
MARK(take(X1, X2)) → ACTIVE(take(mark(X1), mark(X2)))

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


MARK(take(X1, X2)) → ACTIVE(take(mark(X1), mark(X2)))
The remaining pairs can at least be oriented weakly.

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(cons(X1, X2)) → MARK(X1)
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(U21(X)) → MARK(X)
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(U31(tt, IL, M, N)) → MARK(cons(N, take(M, IL)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
MARK(zeros) → ACTIVE(zeros)
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(U31(X1, X2, X3, X4)) → ACTIVE(U31(mark(X1), X2, X3, X4))
ACTIVE(zeros) → MARK(cons(0, zeros))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(and(tt, X)) → MARK(X)
MARK(isNatList(X)) → ACTIVE(isNatList(X))
Used ordering: Polynomial interpretation [25,35]:

POL(U31(x1, x2, x3, x4)) = 2   
POL(mark(x1)) = 2   
POL(U11(x1, x2)) = 2   
POL(and(x1, x2)) = 2   
POL(take(x1, x2)) = 0   
POL(0) = 0   
POL(ACTIVE(x1)) = (2)x_1   
POL(active(x1)) = 3   
POL(cons(x1, x2)) = 4 + (2)x_1   
POL(MARK(x1)) = 4   
POL(tt) = 4   
POL(isNatList(x1)) = 2   
POL(zeros) = 2   
POL(isNatIList(x1)) = 2   
POL(s(x1)) = 1   
POL(isNat(x1)) = 2   
POL(length(x1)) = 2   
POL(nil) = 0   
POL(U21(x1)) = 1 + (2)x_1   
The value of delta used in the strict ordering is 4.
The following usable rules [17] were oriented:

U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(mark(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
length(active(X)) → length(X)
length(mark(X)) → length(X)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)
and(X1, mark(X2)) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
isNatList(active(X)) → isNatList(X)
isNatList(mark(X)) → isNatList(X)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof
                              ↳ QDP
                                ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(cons(X1, X2)) → MARK(X1)
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(U21(X)) → MARK(X)
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(U31(tt, IL, M, N)) → MARK(cons(N, take(M, IL)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
MARK(U31(X1, X2, X3, X4)) → ACTIVE(U31(mark(X1), X2, X3, X4))
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(zeros) → ACTIVE(zeros)
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(zeros) → MARK(cons(0, zeros))
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(and(tt, X)) → MARK(X)
MARK(isNatList(X)) → ACTIVE(isNatList(X))

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


MARK(U21(X)) → MARK(X)
The remaining pairs can at least be oriented weakly.

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(cons(X1, X2)) → MARK(X1)
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(U31(tt, IL, M, N)) → MARK(cons(N, take(M, IL)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
MARK(U31(X1, X2, X3, X4)) → ACTIVE(U31(mark(X1), X2, X3, X4))
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(zeros) → ACTIVE(zeros)
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(zeros) → MARK(cons(0, zeros))
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(and(tt, X)) → MARK(X)
MARK(isNatList(X)) → ACTIVE(isNatList(X))
Used ordering: Polynomial interpretation [25,35]:

POL(U31(x1, x2, x3, x4)) = (4)x_4   
POL(mark(x1)) = x_1   
POL(U11(x1, x2)) = 0   
POL(and(x1, x2)) = x_1 + x_2   
POL(take(x1, x2)) = 3 + x_2   
POL(0) = 0   
POL(ACTIVE(x1)) = x_1   
POL(active(x1)) = x_1   
POL(cons(x1, x2)) = (4)x_1   
POL(MARK(x1)) = x_1   
POL(tt) = 0   
POL(isNatList(x1)) = 0   
POL(zeros) = 0   
POL(isNatIList(x1)) = 0   
POL(s(x1)) = (2)x_1   
POL(isNat(x1)) = 0   
POL(length(x1)) = 0   
POL(nil) = 2   
POL(U21(x1)) = 3 + x_1   
The value of delta used in the strict ordering is 3.
The following usable rules [17] were oriented:

mark(0) → active(0)
mark(tt) → active(tt)
mark(nil) → active(nil)
active(length(nil)) → mark(0)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
mark(zeros) → active(zeros)
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
active(zeros) → mark(cons(0, zeros))
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNatList(X)) → active(isNatList(X))
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
active(U11(tt, L)) → mark(s(length(L)))
mark(isNat(X)) → active(isNat(X))
mark(isNatIList(X)) → active(isNatIList(X))
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
active(isNatIList(V)) → mark(isNatList(V))
active(isNat(length(V1))) → mark(isNatList(V1))
active(and(tt, X)) → mark(X)
mark(length(X)) → active(length(mark(X)))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(U21(X)) → active(U21(mark(X)))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(isNat(s(V1))) → mark(isNat(V1))
mark(s(X)) → active(s(mark(X)))
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
cons(X1, active(X2)) → cons(X1, X2)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(mark(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
length(active(X)) → length(X)
length(mark(X)) → length(X)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
active(U21(tt)) → mark(nil)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)
active(isNatList(nil)) → mark(tt)
active(isNatIList(zeros)) → mark(tt)
and(X1, mark(X2)) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
isNatList(active(X)) → isNatList(X)
isNatList(mark(X)) → isNatList(X)
active(isNat(0)) → mark(tt)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof
                              ↳ QDP
                                ↳ QDPOrderProof
                                  ↳ QDP
                                    ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(cons(X1, X2)) → MARK(X1)
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(U31(tt, IL, M, N)) → MARK(cons(N, take(M, IL)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
MARK(zeros) → ACTIVE(zeros)
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(U31(X1, X2, X3, X4)) → ACTIVE(U31(mark(X1), X2, X3, X4))
ACTIVE(zeros) → MARK(cons(0, zeros))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(and(tt, X)) → MARK(X)
MARK(isNatList(X)) → ACTIVE(isNatList(X))

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


ACTIVE(U31(tt, IL, M, N)) → MARK(cons(N, take(M, IL)))
The remaining pairs can at least be oriented weakly.

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(cons(X1, X2)) → MARK(X1)
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
MARK(zeros) → ACTIVE(zeros)
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(U31(X1, X2, X3, X4)) → ACTIVE(U31(mark(X1), X2, X3, X4))
ACTIVE(zeros) → MARK(cons(0, zeros))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(and(tt, X)) → MARK(X)
MARK(isNatList(X)) → ACTIVE(isNatList(X))
Used ordering: Polynomial interpretation [25,35]:

POL(U31(x1, x2, x3, x4)) = 4 + (4)x_4   
POL(mark(x1)) = x_1   
POL(U11(x1, x2)) = 0   
POL(and(x1, x2)) = x_1 + (2)x_2   
POL(take(x1, x2)) = 4 + (2)x_1 + (2)x_2   
POL(0) = 0   
POL(ACTIVE(x1)) = x_1   
POL(active(x1)) = x_1   
POL(cons(x1, x2)) = (2)x_1   
POL(MARK(x1)) = x_1   
POL(tt) = 0   
POL(isNatList(x1)) = 0   
POL(zeros) = 0   
POL(isNatIList(x1)) = 0   
POL(s(x1)) = x_1   
POL(isNat(x1)) = 0   
POL(length(x1)) = 0   
POL(nil) = 0   
POL(U21(x1)) = (4)x_1   
The value of delta used in the strict ordering is 4.
The following usable rules [17] were oriented:

mark(0) → active(0)
mark(tt) → active(tt)
take(X1, mark(X2)) → take(X1, X2)
take(mark(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
mark(nil) → active(nil)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
active(length(nil)) → mark(0)
length(active(X)) → length(X)
length(mark(X)) → length(X)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
mark(zeros) → active(zeros)
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
active(zeros) → mark(cons(0, zeros))
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNatList(X)) → active(isNatList(X))
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
active(U11(tt, L)) → mark(s(length(L)))
mark(isNat(X)) → active(isNat(X))
mark(isNatIList(X)) → active(isNatIList(X))
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
active(isNatIList(V)) → mark(isNatList(V))
active(isNat(length(V1))) → mark(isNatList(V1))
active(and(tt, X)) → mark(X)
mark(length(X)) → active(length(mark(X)))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(U21(X)) → active(U21(mark(X)))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(isNat(s(V1))) → mark(isNat(V1))
mark(s(X)) → active(s(mark(X)))
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
active(U21(tt)) → mark(nil)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
active(isNatList(nil)) → mark(tt)
active(isNatIList(zeros)) → mark(tt)
and(X1, mark(X2)) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
isNatList(active(X)) → isNatList(X)
isNatList(mark(X)) → isNatList(X)
active(isNat(0)) → mark(tt)
cons(X1, active(X2)) → cons(X1, X2)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof
                              ↳ QDP
                                ↳ QDPOrderProof
                                  ↳ QDP
                                    ↳ QDPOrderProof
                                      ↳ QDP
                                        ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(cons(X1, X2)) → MARK(X1)
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
MARK(U31(X1, X2, X3, X4)) → ACTIVE(U31(mark(X1), X2, X3, X4))
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(zeros) → ACTIVE(zeros)
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(zeros) → MARK(cons(0, zeros))
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(and(tt, X)) → MARK(X)
MARK(isNatList(X)) → ACTIVE(isNatList(X))

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


MARK(U31(X1, X2, X3, X4)) → ACTIVE(U31(mark(X1), X2, X3, X4))
The remaining pairs can at least be oriented weakly.

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(cons(X1, X2)) → MARK(X1)
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(zeros) → ACTIVE(zeros)
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(zeros) → MARK(cons(0, zeros))
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(and(tt, X)) → MARK(X)
MARK(isNatList(X)) → ACTIVE(isNatList(X))
Used ordering: Polynomial interpretation [25,35]:

POL(U31(x1, x2, x3, x4)) = 0   
POL(mark(x1)) = 0   
POL(U11(x1, x2)) = 2   
POL(and(x1, x2)) = 2   
POL(take(x1, x2)) = 4 + (2)x_1 + (4)x_2   
POL(0) = 2   
POL(ACTIVE(x1)) = (2)x_1   
POL(active(x1)) = 4   
POL(cons(x1, x2)) = 0   
POL(MARK(x1)) = 4   
POL(tt) = 3   
POL(isNatList(x1)) = 2   
POL(zeros) = 2   
POL(isNatIList(x1)) = 2   
POL(s(x1)) = 1   
POL(isNat(x1)) = 2   
POL(length(x1)) = 2   
POL(nil) = 3   
POL(U21(x1)) = 2 + (2)x_1   
The value of delta used in the strict ordering is 4.
The following usable rules [17] were oriented:

length(active(X)) → length(X)
length(mark(X)) → length(X)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
isNatList(active(X)) → isNatList(X)
isNatList(mark(X)) → isNatList(X)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof
                              ↳ QDP
                                ↳ QDPOrderProof
                                  ↳ QDP
                                    ↳ QDPOrderProof
                                      ↳ QDP
                                        ↳ QDPOrderProof
                                          ↳ QDP
                                            ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(cons(X1, X2)) → MARK(X1)
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
MARK(zeros) → ACTIVE(zeros)
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
ACTIVE(zeros) → MARK(cons(0, zeros))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(and(tt, X)) → MARK(X)
MARK(isNatList(X)) → ACTIVE(isNatList(X))

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


ACTIVE(zeros) → MARK(cons(0, zeros))
The remaining pairs can at least be oriented weakly.

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(cons(X1, X2)) → MARK(X1)
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
MARK(zeros) → ACTIVE(zeros)
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(and(tt, X)) → MARK(X)
MARK(isNatList(X)) → ACTIVE(isNatList(X))
Used ordering: Polynomial interpretation [25,35]:

POL(U31(x1, x2, x3, x4)) = 1 + (4)x_4   
POL(mark(x1)) = x_1   
POL(U11(x1, x2)) = 0   
POL(and(x1, x2)) = (2)x_1 + (2)x_2   
POL(take(x1, x2)) = 2 + (3)x_2   
POL(0) = 0   
POL(ACTIVE(x1)) = (4)x_1   
POL(active(x1)) = x_1   
POL(cons(x1, x2)) = (4)x_1   
POL(MARK(x1)) = (4)x_1   
POL(tt) = 0   
POL(isNatList(x1)) = 0   
POL(zeros) = 2   
POL(isNatIList(x1)) = 0   
POL(s(x1)) = x_1   
POL(isNat(x1)) = 0   
POL(length(x1)) = 0   
POL(nil) = 0   
POL(U21(x1)) = 2   
The value of delta used in the strict ordering is 8.
The following usable rules [17] were oriented:

mark(0) → active(0)
mark(tt) → active(tt)
take(X1, mark(X2)) → take(X1, X2)
take(mark(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
mark(nil) → active(nil)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
active(length(nil)) → mark(0)
length(active(X)) → length(X)
length(mark(X)) → length(X)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
mark(zeros) → active(zeros)
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
active(zeros) → mark(cons(0, zeros))
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNatList(X)) → active(isNatList(X))
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
active(U11(tt, L)) → mark(s(length(L)))
mark(isNat(X)) → active(isNat(X))
mark(isNatIList(X)) → active(isNatIList(X))
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
active(isNatIList(V)) → mark(isNatList(V))
active(isNat(length(V1))) → mark(isNatList(V1))
active(and(tt, X)) → mark(X)
mark(length(X)) → active(length(mark(X)))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(U21(X)) → active(U21(mark(X)))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(isNat(s(V1))) → mark(isNat(V1))
mark(s(X)) → active(s(mark(X)))
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
active(U21(tt)) → mark(nil)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
active(isNatList(nil)) → mark(tt)
active(isNatIList(zeros)) → mark(tt)
and(X1, mark(X2)) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
isNatList(active(X)) → isNatList(X)
isNatList(mark(X)) → isNatList(X)
active(isNat(0)) → mark(tt)
cons(X1, active(X2)) → cons(X1, X2)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof
                              ↳ QDP
                                ↳ QDPOrderProof
                                  ↳ QDP
                                    ↳ QDPOrderProof
                                      ↳ QDP
                                        ↳ QDPOrderProof
                                          ↳ QDP
                                            ↳ QDPOrderProof
                                              ↳ QDP
                                                ↳ DependencyGraphProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(cons(X1, X2)) → MARK(X1)
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(zeros) → ACTIVE(zeros)
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(and(tt, X)) → MARK(X)
MARK(isNatList(X)) → ACTIVE(isNatList(X))

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The approximation of the Dependency Graph [15,17,22] contains 1 SCC with 1 less node.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof
                              ↳ QDP
                                ↳ QDPOrderProof
                                  ↳ QDP
                                    ↳ QDPOrderProof
                                      ↳ QDP
                                        ↳ QDPOrderProof
                                          ↳ QDP
                                            ↳ QDPOrderProof
                                              ↳ QDP
                                                ↳ DependencyGraphProof
                                                  ↳ QDP
                                                    ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(cons(X1, X2)) → MARK(X1)
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(and(tt, X)) → MARK(X)
MARK(isNatList(X)) → ACTIVE(isNatList(X))

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


MARK(cons(X1, X2)) → MARK(X1)
The remaining pairs can at least be oriented weakly.

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(and(tt, X)) → MARK(X)
MARK(isNatList(X)) → ACTIVE(isNatList(X))
Used ordering: Polynomial interpretation [25,35]:

POL(U31(x1, x2, x3, x4)) = 4 + (2)x_4   
POL(mark(x1)) = (2)x_1   
POL(U11(x1, x2)) = 0   
POL(and(x1, x2)) = x_1 + (4)x_2   
POL(take(x1, x2)) = 4 + (4)x_2   
POL(0) = 0   
POL(ACTIVE(x1)) = x_1   
POL(active(x1)) = x_1   
POL(cons(x1, x2)) = 1 + x_1   
POL(MARK(x1)) = (2)x_1   
POL(tt) = 0   
POL(isNatList(x1)) = 0   
POL(zeros) = 2   
POL(isNatIList(x1)) = 0   
POL(s(x1)) = (2)x_1   
POL(isNat(x1)) = 0   
POL(length(x1)) = 0   
POL(nil) = 0   
POL(U21(x1)) = 1 + x_1   
The value of delta used in the strict ordering is 2.
The following usable rules [17] were oriented:

mark(0) → active(0)
mark(tt) → active(tt)
take(X1, mark(X2)) → take(X1, X2)
take(mark(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
mark(nil) → active(nil)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
active(length(nil)) → mark(0)
length(active(X)) → length(X)
length(mark(X)) → length(X)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
mark(zeros) → active(zeros)
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
active(zeros) → mark(cons(0, zeros))
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNatList(X)) → active(isNatList(X))
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
active(U11(tt, L)) → mark(s(length(L)))
mark(isNat(X)) → active(isNat(X))
mark(isNatIList(X)) → active(isNatIList(X))
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
active(isNatIList(V)) → mark(isNatList(V))
active(isNat(length(V1))) → mark(isNatList(V1))
active(and(tt, X)) → mark(X)
mark(length(X)) → active(length(mark(X)))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(U21(X)) → active(U21(mark(X)))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(isNat(s(V1))) → mark(isNat(V1))
mark(s(X)) → active(s(mark(X)))
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
active(U21(tt)) → mark(nil)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
active(isNatList(nil)) → mark(tt)
active(isNatIList(zeros)) → mark(tt)
and(X1, mark(X2)) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
isNatList(active(X)) → isNatList(X)
isNatList(mark(X)) → isNatList(X)
active(isNat(0)) → mark(tt)
cons(X1, active(X2)) → cons(X1, X2)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof
                              ↳ QDP
                                ↳ QDPOrderProof
                                  ↳ QDP
                                    ↳ QDPOrderProof
                                      ↳ QDP
                                        ↳ QDPOrderProof
                                          ↳ QDP
                                            ↳ QDPOrderProof
                                              ↳ QDP
                                                ↳ DependencyGraphProof
                                                  ↳ QDP
                                                    ↳ QDPOrderProof
                                                      ↳ QDP
                                                        ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(and(tt, X)) → MARK(X)
MARK(isNatList(X)) → ACTIVE(isNatList(X))

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


ACTIVE(isNat(length(V1))) → MARK(isNatList(V1))
The remaining pairs can at least be oriented weakly.

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(and(tt, X)) → MARK(X)
MARK(isNatList(X)) → ACTIVE(isNatList(X))
Used ordering: Polynomial interpretation [25,35]:

POL(U31(x1, x2, x3, x4)) = x_2 + (2)x_3 + (4)x_4   
POL(mark(x1)) = x_1   
POL(U11(x1, x2)) = 4 + (4)x_2   
POL(and(x1, x2)) = (4)x_1 + x_2   
POL(take(x1, x2)) = (2)x_1 + x_2   
POL(0) = 0   
POL(ACTIVE(x1)) = (2)x_1   
POL(active(x1)) = x_1   
POL(cons(x1, x2)) = (4)x_1 + x_2   
POL(MARK(x1)) = (2)x_1   
POL(tt) = 0   
POL(isNatList(x1)) = (4)x_1   
POL(zeros) = 0   
POL(isNatIList(x1)) = (4)x_1   
POL(s(x1)) = x_1   
POL(isNat(x1)) = (2)x_1   
POL(length(x1)) = 4 + (4)x_1   
POL(nil) = 0   
POL(U21(x1)) = 0   
The value of delta used in the strict ordering is 16.
The following usable rules [17] were oriented:

mark(0) → active(0)
mark(tt) → active(tt)
take(X1, mark(X2)) → take(X1, X2)
take(mark(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
mark(nil) → active(nil)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
active(length(nil)) → mark(0)
length(active(X)) → length(X)
length(mark(X)) → length(X)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
mark(zeros) → active(zeros)
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
active(zeros) → mark(cons(0, zeros))
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNatList(X)) → active(isNatList(X))
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
active(U11(tt, L)) → mark(s(length(L)))
mark(isNat(X)) → active(isNat(X))
mark(isNatIList(X)) → active(isNatIList(X))
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
active(isNatIList(V)) → mark(isNatList(V))
active(isNat(length(V1))) → mark(isNatList(V1))
active(and(tt, X)) → mark(X)
mark(length(X)) → active(length(mark(X)))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(U21(X)) → active(U21(mark(X)))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(isNat(s(V1))) → mark(isNat(V1))
mark(s(X)) → active(s(mark(X)))
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
active(U21(tt)) → mark(nil)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
active(isNatList(nil)) → mark(tt)
active(isNatIList(zeros)) → mark(tt)
and(X1, mark(X2)) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
isNatList(active(X)) → isNatList(X)
isNatList(mark(X)) → isNatList(X)
active(isNat(0)) → mark(tt)
cons(X1, active(X2)) → cons(X1, X2)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof
                              ↳ QDP
                                ↳ QDPOrderProof
                                  ↳ QDP
                                    ↳ QDPOrderProof
                                      ↳ QDP
                                        ↳ QDPOrderProof
                                          ↳ QDP
                                            ↳ QDPOrderProof
                                              ↳ QDP
                                                ↳ DependencyGraphProof
                                                  ↳ QDP
                                                    ↳ QDPOrderProof
                                                      ↳ QDP
                                                        ↳ QDPOrderProof
                                                          ↳ QDP
                                                            ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(and(tt, X)) → MARK(X)
MARK(isNatList(X)) → ACTIVE(isNatList(X))

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


ACTIVE(isNatList(take(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
The remaining pairs can at least be oriented weakly.

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(and(tt, X)) → MARK(X)
MARK(isNatList(X)) → ACTIVE(isNatList(X))
Used ordering: Polynomial interpretation [25,35]:

POL(U31(x1, x2, x3, x4)) = 4 + (2)x_2 + (4)x_3 + (4)x_4   
POL(mark(x1)) = x_1   
POL(U11(x1, x2)) = (4)x_2   
POL(and(x1, x2)) = (4)x_1 + x_2   
POL(take(x1, x2)) = 4 + (4)x_1 + (2)x_2   
POL(0) = 0   
POL(ACTIVE(x1)) = x_1   
POL(active(x1)) = x_1   
POL(cons(x1, x2)) = (4)x_1 + x_2   
POL(MARK(x1)) = x_1   
POL(tt) = 0   
POL(isNatList(x1)) = (2)x_1   
POL(zeros) = 0   
POL(isNatIList(x1)) = (4)x_1   
POL(s(x1)) = x_1   
POL(isNat(x1)) = (2)x_1   
POL(length(x1)) = (4)x_1   
POL(nil) = 0   
POL(U21(x1)) = 0   
The value of delta used in the strict ordering is 8.
The following usable rules [17] were oriented:

mark(0) → active(0)
mark(tt) → active(tt)
take(X1, mark(X2)) → take(X1, X2)
take(mark(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
mark(nil) → active(nil)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
active(length(nil)) → mark(0)
length(active(X)) → length(X)
length(mark(X)) → length(X)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
mark(zeros) → active(zeros)
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
active(zeros) → mark(cons(0, zeros))
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNatList(X)) → active(isNatList(X))
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
active(U11(tt, L)) → mark(s(length(L)))
mark(isNat(X)) → active(isNat(X))
mark(isNatIList(X)) → active(isNatIList(X))
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
active(isNatIList(V)) → mark(isNatList(V))
active(isNat(length(V1))) → mark(isNatList(V1))
active(and(tt, X)) → mark(X)
mark(length(X)) → active(length(mark(X)))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(U21(X)) → active(U21(mark(X)))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(isNat(s(V1))) → mark(isNat(V1))
mark(s(X)) → active(s(mark(X)))
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
active(U21(tt)) → mark(nil)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
active(isNatList(nil)) → mark(tt)
active(isNatIList(zeros)) → mark(tt)
and(X1, mark(X2)) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
isNatList(active(X)) → isNatList(X)
isNatList(mark(X)) → isNatList(X)
active(isNat(0)) → mark(tt)
cons(X1, active(X2)) → cons(X1, X2)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof
                              ↳ QDP
                                ↳ QDPOrderProof
                                  ↳ QDP
                                    ↳ QDPOrderProof
                                      ↳ QDP
                                        ↳ QDPOrderProof
                                          ↳ QDP
                                            ↳ QDPOrderProof
                                              ↳ QDP
                                                ↳ DependencyGraphProof
                                                  ↳ QDP
                                                    ↳ QDPOrderProof
                                                      ↳ QDP
                                                        ↳ QDPOrderProof
                                                          ↳ QDP
                                                            ↳ QDPOrderProof
                                                              ↳ QDP
                                                                ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
ACTIVE(isNatIList(V)) → MARK(isNatList(V))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(and(tt, X)) → MARK(X)
MARK(isNatList(X)) → ACTIVE(isNatList(X))

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


ACTIVE(isNatIList(V)) → MARK(isNatList(V))
The remaining pairs can at least be oriented weakly.

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(and(tt, X)) → MARK(X)
MARK(isNatList(X)) → ACTIVE(isNatList(X))
Used ordering: Polynomial interpretation [25,35]:

POL(U31(x1, x2, x3, x4)) = 2 + (4)x_2 + (4)x_3 + (4)x_4   
POL(mark(x1)) = x_1   
POL(U11(x1, x2)) = x_2   
POL(and(x1, x2)) = (4)x_1 + x_2   
POL(take(x1, x2)) = 2 + (4)x_1 + (4)x_2   
POL(0) = 0   
POL(ACTIVE(x1)) = (4)x_1   
POL(active(x1)) = x_1   
POL(cons(x1, x2)) = (4)x_1 + x_2   
POL(MARK(x1)) = (4)x_1   
POL(tt) = 0   
POL(isNatList(x1)) = (4)x_1   
POL(zeros) = 0   
POL(isNatIList(x1)) = 2 + (4)x_1   
POL(s(x1)) = x_1   
POL(isNat(x1)) = (4)x_1   
POL(length(x1)) = x_1   
POL(nil) = 0   
POL(U21(x1)) = x_1   
The value of delta used in the strict ordering is 8.
The following usable rules [17] were oriented:

mark(0) → active(0)
mark(tt) → active(tt)
take(X1, mark(X2)) → take(X1, X2)
take(mark(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
mark(nil) → active(nil)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
active(length(nil)) → mark(0)
length(active(X)) → length(X)
length(mark(X)) → length(X)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
mark(zeros) → active(zeros)
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
active(zeros) → mark(cons(0, zeros))
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNatList(X)) → active(isNatList(X))
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
active(U11(tt, L)) → mark(s(length(L)))
mark(isNat(X)) → active(isNat(X))
mark(isNatIList(X)) → active(isNatIList(X))
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
active(isNatIList(V)) → mark(isNatList(V))
active(isNat(length(V1))) → mark(isNatList(V1))
active(and(tt, X)) → mark(X)
mark(length(X)) → active(length(mark(X)))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(U21(X)) → active(U21(mark(X)))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(isNat(s(V1))) → mark(isNat(V1))
mark(s(X)) → active(s(mark(X)))
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
active(U21(tt)) → mark(nil)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
s(active(X)) → s(X)
s(mark(X)) → s(X)
active(isNatList(nil)) → mark(tt)
active(isNatIList(zeros)) → mark(tt)
and(X1, mark(X2)) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
isNatList(active(X)) → isNatList(X)
isNatList(mark(X)) → isNatList(X)
active(isNat(0)) → mark(tt)
cons(X1, active(X2)) → cons(X1, X2)
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof
                              ↳ QDP
                                ↳ QDPOrderProof
                                  ↳ QDP
                                    ↳ QDPOrderProof
                                      ↳ QDP
                                        ↳ QDPOrderProof
                                          ↳ QDP
                                            ↳ QDPOrderProof
                                              ↳ QDP
                                                ↳ DependencyGraphProof
                                                  ↳ QDP
                                                    ↳ QDPOrderProof
                                                      ↳ QDP
                                                        ↳ QDPOrderProof
                                                          ↳ QDP
                                                            ↳ QDPOrderProof
                                                              ↳ QDP
                                                                ↳ QDPOrderProof
                                                                  ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
ACTIVE(length(cons(N, L))) → MARK(U11(and(isNatList(L), isNat(N)), L))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
MARK(isNatIList(X)) → ACTIVE(isNatIList(X))
ACTIVE(U11(tt, L)) → MARK(s(length(L)))
ACTIVE(isNatIList(cons(V1, V2))) → MARK(and(isNat(V1), isNatIList(V2)))
MARK(length(X)) → ACTIVE(length(mark(X)))
MARK(and(X1, X2)) → ACTIVE(and(mark(X1), X2))
ACTIVE(isNatList(cons(V1, V2))) → MARK(and(isNat(V1), isNatList(V2)))
MARK(and(X1, X2)) → MARK(X1)
ACTIVE(isNat(s(V1))) → MARK(isNat(V1))
ACTIVE(and(tt, X)) → MARK(X)
MARK(isNatList(X)) → ACTIVE(isNatList(X))

The TRS R consists of the following rules:

active(zeros) → mark(cons(0, zeros))
active(U11(tt, L)) → mark(s(length(L)))
active(U21(tt)) → mark(nil)
active(U31(tt, IL, M, N)) → mark(cons(N, take(M, IL)))
active(and(tt, X)) → mark(X)
active(isNat(0)) → mark(tt)
active(isNat(length(V1))) → mark(isNatList(V1))
active(isNat(s(V1))) → mark(isNat(V1))
active(isNatIList(V)) → mark(isNatList(V))
active(isNatIList(zeros)) → mark(tt)
active(isNatIList(cons(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(isNatList(nil)) → mark(tt)
active(isNatList(cons(V1, V2))) → mark(and(isNat(V1), isNatList(V2)))
active(isNatList(take(V1, V2))) → mark(and(isNat(V1), isNatIList(V2)))
active(length(nil)) → mark(0)
active(length(cons(N, L))) → mark(U11(and(isNatList(L), isNat(N)), L))
active(take(0, IL)) → mark(U21(isNatIList(IL)))
active(take(s(M), cons(N, IL))) → mark(U31(and(isNatIList(IL), and(isNat(M), isNat(N))), IL, M, N))
mark(zeros) → active(zeros)
mark(cons(X1, X2)) → active(cons(mark(X1), X2))
mark(0) → active(0)
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(s(X)) → active(s(mark(X)))
mark(length(X)) → active(length(mark(X)))
mark(U21(X)) → active(U21(mark(X)))
mark(nil) → active(nil)
mark(U31(X1, X2, X3, X4)) → active(U31(mark(X1), X2, X3, X4))
mark(take(X1, X2)) → active(take(mark(X1), mark(X2)))
mark(and(X1, X2)) → active(and(mark(X1), X2))
mark(isNat(X)) → active(isNat(X))
mark(isNatList(X)) → active(isNatList(X))
mark(isNatIList(X)) → active(isNatIList(X))
cons(mark(X1), X2) → cons(X1, X2)
cons(X1, mark(X2)) → cons(X1, X2)
cons(active(X1), X2) → cons(X1, X2)
cons(X1, active(X2)) → cons(X1, X2)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
s(mark(X)) → s(X)
s(active(X)) → s(X)
length(mark(X)) → length(X)
length(active(X)) → length(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, mark(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, mark(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, mark(X4)) → U31(X1, X2, X3, X4)
U31(active(X1), X2, X3, X4) → U31(X1, X2, X3, X4)
U31(X1, active(X2), X3, X4) → U31(X1, X2, X3, X4)
U31(X1, X2, active(X3), X4) → U31(X1, X2, X3, X4)
U31(X1, X2, X3, active(X4)) → U31(X1, X2, X3, X4)
take(mark(X1), X2) → take(X1, X2)
take(X1, mark(X2)) → take(X1, X2)
take(active(X1), X2) → take(X1, X2)
take(X1, active(X2)) → take(X1, X2)
and(mark(X1), X2) → and(X1, X2)
and(X1, mark(X2)) → and(X1, X2)
and(active(X1), X2) → and(X1, X2)
and(X1, active(X2)) → and(X1, X2)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
isNatList(mark(X)) → isNatList(X)
isNatList(active(X)) → isNatList(X)
isNatIList(mark(X)) → isNatIList(X)
isNatIList(active(X)) → isNatIList(X)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.