Term Rewriting System R:
[X, Y, Z, X1, X2]
active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))

Termination of R to be shown. 



   R
     ↳Dependency Pair Analysis



R contains the following Dependency Pairs:

ACTIVE(2nd(cons(X, X1))) -> 2ND(cons1(X, X1))
ACTIVE(2nd(cons(X, X1))) -> CONS1(X, X1)
ACTIVE(from(X)) -> CONS(X, from(s(X)))
ACTIVE(from(X)) -> FROM(s(X))
ACTIVE(from(X)) -> S(X)
ACTIVE(2nd(X)) -> 2ND(active(X))
ACTIVE(2nd(X)) -> ACTIVE(X)
ACTIVE(cons(X1, X2)) -> CONS(active(X1), X2)
ACTIVE(cons(X1, X2)) -> ACTIVE(X1)
ACTIVE(from(X)) -> FROM(active(X))
ACTIVE(from(X)) -> ACTIVE(X)
ACTIVE(s(X)) -> S(active(X))
ACTIVE(s(X)) -> ACTIVE(X)
ACTIVE(cons1(X1, X2)) -> CONS1(active(X1), X2)
ACTIVE(cons1(X1, X2)) -> ACTIVE(X1)
ACTIVE(cons1(X1, X2)) -> CONS1(X1, active(X2))
ACTIVE(cons1(X1, X2)) -> ACTIVE(X2)
2ND(mark(X)) -> 2ND(X)
2ND(ok(X)) -> 2ND(X)
CONS(mark(X1), X2) -> CONS(X1, X2)
CONS(ok(X1), ok(X2)) -> CONS(X1, X2)
FROM(mark(X)) -> FROM(X)
FROM(ok(X)) -> FROM(X)
S(mark(X)) -> S(X)
S(ok(X)) -> S(X)
CONS1(mark(X1), X2) -> CONS1(X1, X2)
CONS1(X1, mark(X2)) -> CONS1(X1, X2)
CONS1(ok(X1), ok(X2)) -> CONS1(X1, X2)
PROPER(2nd(X)) -> 2ND(proper(X))
PROPER(2nd(X)) -> PROPER(X)
PROPER(cons(X1, X2)) -> CONS(proper(X1), proper(X2))
PROPER(cons(X1, X2)) -> PROPER(X1)
PROPER(cons(X1, X2)) -> PROPER(X2)
PROPER(from(X)) -> FROM(proper(X))
PROPER(from(X)) -> PROPER(X)
PROPER(s(X)) -> S(proper(X))
PROPER(s(X)) -> PROPER(X)
PROPER(cons1(X1, X2)) -> CONS1(proper(X1), proper(X2))
PROPER(cons1(X1, X2)) -> PROPER(X1)
PROPER(cons1(X1, X2)) -> PROPER(X2)
TOP(mark(X)) -> TOP(proper(X))
TOP(mark(X)) -> PROPER(X)
TOP(ok(X)) -> TOP(active(X))
TOP(ok(X)) -> ACTIVE(X)

Furthermore, R contains eight SCCs. 


   R
     ↳DPs
       →DP Problem 1
         ↳Polynomial Ordering
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pairs:

2ND(ok(X)) -> 2ND(X)
2ND(mark(X)) -> 2ND(X)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pair can be strictly oriented:

2ND(ok(X)) -> 2ND(X)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(2ND(x1))=  x1  
  POL(mark(x1))=  x1  
  POL(ok(x1))=  1 + x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
           →DP Problem 9
             ↳Polynomial Ordering
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pair:

2ND(mark(X)) -> 2ND(X)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pair can be strictly oriented:

2ND(mark(X)) -> 2ND(X)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(2ND(x1))=  x1  
  POL(mark(x1))=  1 + x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
           →DP Problem 9
             ↳Polo
             ...
               →DP Problem 10
                 ↳Dependency Graph
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pair:


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





Using the Dependency Graph resulted in no new DP problems.


   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polynomial Ordering
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pairs:

CONS1(ok(X1), ok(X2)) -> CONS1(X1, X2)
CONS1(X1, mark(X2)) -> CONS1(X1, X2)
CONS1(mark(X1), X2) -> CONS1(X1, X2)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pair can be strictly oriented:

CONS1(ok(X1), ok(X2)) -> CONS1(X1, X2)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(CONS1(x1, x2))=  x1  
  POL(mark(x1))=  x1  
  POL(ok(x1))=  1 + x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
           →DP Problem 11
             ↳Polynomial Ordering
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pairs:

CONS1(X1, mark(X2)) -> CONS1(X1, X2)
CONS1(mark(X1), X2) -> CONS1(X1, X2)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pair can be strictly oriented:

CONS1(mark(X1), X2) -> CONS1(X1, X2)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(CONS1(x1, x2))=  x1  
  POL(mark(x1))=  1 + x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
           →DP Problem 11
             ↳Polo
             ...
               →DP Problem 12
                 ↳Polynomial Ordering
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pair:

CONS1(X1, mark(X2)) -> CONS1(X1, X2)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pair can be strictly oriented:

CONS1(X1, mark(X2)) -> CONS1(X1, X2)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(CONS1(x1, x2))=  x2  
  POL(mark(x1))=  1 + x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
           →DP Problem 11
             ↳Polo
             ...
               →DP Problem 13
                 ↳Dependency Graph
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pair:


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





Using the Dependency Graph resulted in no new DP problems.


   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polynomial Ordering
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pairs:

CONS(ok(X1), ok(X2)) -> CONS(X1, X2)
CONS(mark(X1), X2) -> CONS(X1, X2)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pair can be strictly oriented:

CONS(ok(X1), ok(X2)) -> CONS(X1, X2)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(mark(x1))=  0  
  POL(ok(x1))=  1 + x1  
  POL(CONS(x1, x2))=  x2  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
           →DP Problem 14
             ↳Polynomial Ordering
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pair:

CONS(mark(X1), X2) -> CONS(X1, X2)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pair can be strictly oriented:

CONS(mark(X1), X2) -> CONS(X1, X2)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(mark(x1))=  1 + x1  
  POL(CONS(x1, x2))=  x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
           →DP Problem 14
             ↳Polo
             ...
               →DP Problem 15
                 ↳Dependency Graph
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pair:


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





Using the Dependency Graph resulted in no new DP problems.


   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polynomial Ordering
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pairs:

FROM(ok(X)) -> FROM(X)
FROM(mark(X)) -> FROM(X)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pair can be strictly oriented:

FROM(ok(X)) -> FROM(X)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(FROM(x1))=  x1  
  POL(mark(x1))=  x1  
  POL(ok(x1))=  1 + x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
           →DP Problem 16
             ↳Polynomial Ordering
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pair:

FROM(mark(X)) -> FROM(X)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pair can be strictly oriented:

FROM(mark(X)) -> FROM(X)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(FROM(x1))=  x1  
  POL(mark(x1))=  1 + x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
           →DP Problem 16
             ↳Polo
             ...
               →DP Problem 17
                 ↳Dependency Graph
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pair:


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





Using the Dependency Graph resulted in no new DP problems.


   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polynomial Ordering
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pairs:

S(ok(X)) -> S(X)
S(mark(X)) -> S(X)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pair can be strictly oriented:

S(ok(X)) -> S(X)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(S(x1))=  x1  
  POL(mark(x1))=  x1  
  POL(ok(x1))=  1 + x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
           →DP Problem 18
             ↳Polynomial Ordering
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pair:

S(mark(X)) -> S(X)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pair can be strictly oriented:

S(mark(X)) -> S(X)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(S(x1))=  x1  
  POL(mark(x1))=  1 + x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
           →DP Problem 18
             ↳Polo
             ...
               →DP Problem 19
                 ↳Dependency Graph
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pair:


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





Using the Dependency Graph resulted in no new DP problems.


   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polynomial Ordering
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pairs:

ACTIVE(cons1(X1, X2)) -> ACTIVE(X2)
ACTIVE(cons1(X1, X2)) -> ACTIVE(X1)
ACTIVE(s(X)) -> ACTIVE(X)
ACTIVE(from(X)) -> ACTIVE(X)
ACTIVE(cons(X1, X2)) -> ACTIVE(X1)
ACTIVE(2nd(X)) -> ACTIVE(X)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pair can be strictly oriented:

ACTIVE(cons(X1, X2)) -> ACTIVE(X1)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(from(x1))=  x1  
  POL(ACTIVE(x1))=  x1  
  POL(cons1(x1, x2))=  x1 + x2  
  POL(2nd(x1))=  x1  
  POL(cons(x1, x2))=  1 + x1  
  POL(s(x1))=  x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
           →DP Problem 20
             ↳Polynomial Ordering
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pairs:

ACTIVE(cons1(X1, X2)) -> ACTIVE(X2)
ACTIVE(cons1(X1, X2)) -> ACTIVE(X1)
ACTIVE(s(X)) -> ACTIVE(X)
ACTIVE(from(X)) -> ACTIVE(X)
ACTIVE(2nd(X)) -> ACTIVE(X)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pair can be strictly oriented:

ACTIVE(2nd(X)) -> ACTIVE(X)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(from(x1))=  x1  
  POL(ACTIVE(x1))=  x1  
  POL(cons1(x1, x2))=  x1 + x2  
  POL(2nd(x1))=  1 + x1  
  POL(s(x1))=  x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
           →DP Problem 20
             ↳Polo
             ...
               →DP Problem 21
                 ↳Polynomial Ordering
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pairs:

ACTIVE(cons1(X1, X2)) -> ACTIVE(X2)
ACTIVE(cons1(X1, X2)) -> ACTIVE(X1)
ACTIVE(s(X)) -> ACTIVE(X)
ACTIVE(from(X)) -> ACTIVE(X)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pairs can be strictly oriented:

ACTIVE(cons1(X1, X2)) -> ACTIVE(X2)
ACTIVE(cons1(X1, X2)) -> ACTIVE(X1)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(from(x1))=  x1  
  POL(ACTIVE(x1))=  x1  
  POL(cons1(x1, x2))=  1 + x1 + x2  
  POL(s(x1))=  x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
           →DP Problem 20
             ↳Polo
             ...
               →DP Problem 22
                 ↳Polynomial Ordering
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pairs:

ACTIVE(s(X)) -> ACTIVE(X)
ACTIVE(from(X)) -> ACTIVE(X)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pair can be strictly oriented:

ACTIVE(s(X)) -> ACTIVE(X)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(from(x1))=  x1  
  POL(ACTIVE(x1))=  x1  
  POL(s(x1))=  1 + x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
           →DP Problem 20
             ↳Polo
             ...
               →DP Problem 23
                 ↳Polynomial Ordering
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pair:

ACTIVE(from(X)) -> ACTIVE(X)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pair can be strictly oriented:

ACTIVE(from(X)) -> ACTIVE(X)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(from(x1))=  1 + x1  
  POL(ACTIVE(x1))=  x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
           →DP Problem 20
             ↳Polo
             ...
               →DP Problem 24
                 ↳Dependency Graph
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo


Dependency Pair:


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





Using the Dependency Graph resulted in no new DP problems.


   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polynomial Ordering
       →DP Problem 8
         ↳Polo


Dependency Pairs:

PROPER(cons1(X1, X2)) -> PROPER(X2)
PROPER(cons1(X1, X2)) -> PROPER(X1)
PROPER(s(X)) -> PROPER(X)
PROPER(from(X)) -> PROPER(X)
PROPER(cons(X1, X2)) -> PROPER(X2)
PROPER(cons(X1, X2)) -> PROPER(X1)
PROPER(2nd(X)) -> PROPER(X)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pairs can be strictly oriented:

PROPER(cons(X1, X2)) -> PROPER(X2)
PROPER(cons(X1, X2)) -> PROPER(X1)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(from(x1))=  x1  
  POL(cons1(x1, x2))=  x1 + x2  
  POL(2nd(x1))=  x1  
  POL(PROPER(x1))=  x1  
  POL(cons(x1, x2))=  1 + x1 + x2  
  POL(s(x1))=  x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
           →DP Problem 25
             ↳Polynomial Ordering
       →DP Problem 8
         ↳Polo


Dependency Pairs:

PROPER(cons1(X1, X2)) -> PROPER(X2)
PROPER(cons1(X1, X2)) -> PROPER(X1)
PROPER(s(X)) -> PROPER(X)
PROPER(from(X)) -> PROPER(X)
PROPER(2nd(X)) -> PROPER(X)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pair can be strictly oriented:

PROPER(2nd(X)) -> PROPER(X)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(from(x1))=  x1  
  POL(cons1(x1, x2))=  x1 + x2  
  POL(2nd(x1))=  1 + x1  
  POL(PROPER(x1))=  x1  
  POL(s(x1))=  x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
           →DP Problem 25
             ↳Polo
             ...
               →DP Problem 26
                 ↳Polynomial Ordering
       →DP Problem 8
         ↳Polo


Dependency Pairs:

PROPER(cons1(X1, X2)) -> PROPER(X2)
PROPER(cons1(X1, X2)) -> PROPER(X1)
PROPER(s(X)) -> PROPER(X)
PROPER(from(X)) -> PROPER(X)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pairs can be strictly oriented:

PROPER(cons1(X1, X2)) -> PROPER(X2)
PROPER(cons1(X1, X2)) -> PROPER(X1)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(from(x1))=  x1  
  POL(cons1(x1, x2))=  1 + x1 + x2  
  POL(PROPER(x1))=  x1  
  POL(s(x1))=  x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
           →DP Problem 25
             ↳Polo
             ...
               →DP Problem 27
                 ↳Polynomial Ordering
       →DP Problem 8
         ↳Polo


Dependency Pairs:

PROPER(s(X)) -> PROPER(X)
PROPER(from(X)) -> PROPER(X)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pair can be strictly oriented:

PROPER(s(X)) -> PROPER(X)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(from(x1))=  x1  
  POL(PROPER(x1))=  x1  
  POL(s(x1))=  1 + x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
           →DP Problem 25
             ↳Polo
             ...
               →DP Problem 28
                 ↳Polynomial Ordering
       →DP Problem 8
         ↳Polo


Dependency Pair:

PROPER(from(X)) -> PROPER(X)


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pair can be strictly oriented:

PROPER(from(X)) -> PROPER(X)


There are no usable rules w.r.t. to the implicit AFS that need to be oriented.

Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(from(x1))=  1 + x1  
  POL(PROPER(x1))=  x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
           →DP Problem 25
             ↳Polo
             ...
               →DP Problem 29
                 ↳Dependency Graph
       →DP Problem 8
         ↳Polo


Dependency Pair:


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





Using the Dependency Graph resulted in no new DP problems.


   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polynomial Ordering


Dependency Pairs:

TOP(ok(X)) -> TOP(active(X))
TOP(mark(X)) -> TOP(proper(X))


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pair can be strictly oriented:

TOP(ok(X)) -> TOP(active(X))


Additionally, the following usable rules w.r.t. to the implicit AFS can be oriented:

active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))


Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(from(x1))=  x1  
  POL(active(x1))=  x1  
  POL(proper(x1))=  0  
  POL(cons1(x1, x2))=  x1  
  POL(2nd(x1))=  x1  
  POL(cons(x1, x2))=  x2  
  POL(s(x1))=  x1  
  POL(mark(x1))=  0  
  POL(ok(x1))=  1 + x1  
  POL(TOP(x1))=  x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo
           →DP Problem 30
             ↳Polynomial Ordering


Dependency Pair:

TOP(mark(X)) -> TOP(proper(X))


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





The following dependency pair can be strictly oriented:

TOP(mark(X)) -> TOP(proper(X))


Additionally, the following usable rules w.r.t. to the implicit AFS can be oriented:

proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))


Used ordering: Polynomial ordering with Polynomial interpretation:
  POL(from(x1))=  x1  
  POL(proper(x1))=  0  
  POL(cons1(x1, x2))=  x1 + x2  
  POL(2nd(x1))=  x1  
  POL(cons(x1, x2))=  x1  
  POL(s(x1))=  x1  
  POL(mark(x1))=  1  
  POL(ok(x1))=  0  
  POL(TOP(x1))=  x1  

resulting in one new DP problem. 



   R
     ↳DPs
       →DP Problem 1
         ↳Polo
       →DP Problem 2
         ↳Polo
       →DP Problem 3
         ↳Polo
       →DP Problem 4
         ↳Polo
       →DP Problem 5
         ↳Polo
       →DP Problem 6
         ↳Polo
       →DP Problem 7
         ↳Polo
       →DP Problem 8
         ↳Polo
           →DP Problem 30
             ↳Polo
             ...
               →DP Problem 31
                 ↳Dependency Graph


Dependency Pair:


Rules:


active(2nd(cons1(X, cons(Y, Z)))) -> mark(Y)
active(2nd(cons(X, X1))) -> mark(2nd(cons1(X, X1)))
active(from(X)) -> mark(cons(X, from(s(X))))
active(2nd(X)) -> 2nd(active(X))
active(cons(X1, X2)) -> cons(active(X1), X2)
active(from(X)) -> from(active(X))
active(s(X)) -> s(active(X))
active(cons1(X1, X2)) -> cons1(active(X1), X2)
active(cons1(X1, X2)) -> cons1(X1, active(X2))
2nd(mark(X)) -> mark(2nd(X))
2nd(ok(X)) -> ok(2nd(X))
cons(mark(X1), X2) -> mark(cons(X1, X2))
cons(ok(X1), ok(X2)) -> ok(cons(X1, X2))
from(mark(X)) -> mark(from(X))
from(ok(X)) -> ok(from(X))
s(mark(X)) -> mark(s(X))
s(ok(X)) -> ok(s(X))
cons1(mark(X1), X2) -> mark(cons1(X1, X2))
cons1(X1, mark(X2)) -> mark(cons1(X1, X2))
cons1(ok(X1), ok(X2)) -> ok(cons1(X1, X2))
proper(2nd(X)) -> 2nd(proper(X))
proper(cons(X1, X2)) -> cons(proper(X1), proper(X2))
proper(from(X)) -> from(proper(X))
proper(s(X)) -> s(proper(X))
proper(cons1(X1, X2)) -> cons1(proper(X1), proper(X2))
top(mark(X)) -> top(proper(X))
top(ok(X)) -> top(active(X))





Using the Dependency Graph resulted in no new DP problems.

Termination of R successfully shown.
Duration:
0:01 minutes